Jump to content

Recommended Posts

Posted

 

interesting point about removing the spring in the switch..still wouldn't turn off the drl though..thats gonna take some wire harness or bcm work..

 

 

Incorrect. At least on my 2015, drl and automatic headlights stay off now. If only I could get the dash light intensity to link to the headlight switch position, I'd be fully satisfied.

Posted

Hmm, I haven't tried it during the day but I tried it last night, as soon as it's put in drive the lights come back on,even if I hold the switch on the off position.. This was on my 14 sle

Posted

Rick, you are missing the point. The lights should be off whenever I start my truck. The lights should remain off until I decide to turn them on. Dantheman, this has nothing to do with safety and everything to do with not liking having decisions made on my behalf without my consent, even if the issue is as simple as daytime running lights and automatic lights.

Posted

Hmm, I haven't tried it during the day but I tried it last night, as soon as it's put in drive the lights come back on,even if I hold the switch on the off position.. This was on my 14 sle

Perhaps you are inadvertently turning them back on? Setting switch from from Auto-Off-Auto once it disables them; doing Auto-Off-Auto again turns them back on.

With the spring removed my switch stays in the Off position. Now every time I start my truck I get a message in the DIC telling me the auto light function is disabled.

Posted

Yea I'm not to sure.. I know when I'm holding it off and put it in Park the lights turn back off.. I'm gonna have to pull the spring out of mine and see what it does.. Then disable the light sensor.

Posted

Since several years ago, I've wondered about that. Setting the BCM to a default set for another country may work with a few things I wanted turned off.

  • Like 1
Posted

If you unclip the plug on the dash sensor, does that disable the auto lights?

Posted

If you unclip the plug on the dash sensor, does that disable the auto lights?

exact opposite..you also loose hvac stuff

Posted

Rick, you are missing the point. The lights should be off whenever I start my truck. The lights should remain off until I decide to turn them on. Dantheman, this has nothing to do with safety and everything to do with not liking having decisions made on my behalf without my consent, even if the issue is as simple as daytime running lights and automatic lights.

 

Laughed at that part. You consented to purchase the truck in the form in which it operates at the time of purchase. No feature was forced upon you against your will after the bill of sale was signed - so blaming you ignorance to the function of the vehicle instead on willful disobedience from said vehicle is absolutely absurd.

  • Like 1
  • 2 weeks later...
Posted

 

Laughed at that part. You consented to purchase the truck in the form in which it operates at the time of purchase. No feature was forced upon you against your will after the bill of sale was signed - so blaming you ignorance to the function of the vehicle instead on willful disobedience from said vehicle is absolutely absurd.

Dangerdick: first of all, love the name. Second, If I want to disable DRLs, the dealers should offer the service of disabling said DRLs for free or a small fee since there are no laws requiring automatic and DRL features.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   1 Member, 0 Anonymous, 291 Guests (See full list)


  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...