Jump to content

Recommended Posts

Posted

2016 Silverado LTZ Z71.

OEM GM 20x9 +24 offset wheels. Clear coated PVD Black Chrome.

Nitto Terra Grappler G2 285/55-20.

Bilstein 5100 Ride Height Adjustable shocks on highest setting. No rubbing. No trimming.

Did you do the wheels yourself? Those look amazing!

Posted

After going through all these pages I never could find the setup I went with

 

Bilstien 5100 level shocks up front only. 20x9 with +1 offset fuel coupler. With 275/60/20 Goodyear duratrac tires. Slight rub at full lock. I zip tied the wheel liners back and no more rub.

post-148013-0-16876700-1468330782_thumb.jpeg

post-148013-0-22610900-1468330789_thumb.jpeg

post-148013-0-58441400-1468330796_thumb.jpeg

post-148013-0-16876700-1468330782_thumb.jpeg

post-148013-0-22610900-1468330789_thumb.jpeg

post-148013-0-58441400-1468330796_thumb.jpeg

post-148013-0-16876700-1468330782_thumb.jpeg

post-148013-0-22610900-1468330789_thumb.jpeg

post-148013-0-58441400-1468330796_thumb.jpeg

post-148013-0-16876700-1468330782_thumb.jpeg

post-148013-0-22610900-1468330789_thumb.jpeg

post-148013-0-58441400-1468330796_thumb.jpeg

  • Like 2
Posted

IMG_5633_zpszeysxwqg.jpg

 

20x10 Hostile Sprocket, -19 offset with Toyo Open Country 33X12.50R20LT rubber. Slight rubbing on full lock on the driver side but not bad. The truck was already leveled when I bought it so I'm not sure the brand, etc but it was sitting pretty high.

 

Thanks to Bigfoot16 for all the help on the offset, etc. I basically copied his setup (haha)

I wish I had known 20x10s with 33 12.5s would fit my truck. Looks dope.

Posted (edited)

 

 

The 285/50/22 would fit easy, especially with a level. But unless you need a E rated tire, I'd probably just go with the 305/45/22. The 305 is less than .5" shorter and a little wider. Probably not noticeable to the naked eye, but is only LT rated so it would be lighter and ride better. If I go with 22s, thats the decision I'd make. The 305 is also quite a bit cheaper than the 285/50/22. Not sure if the extra .5" is worth the price premium.

 

The 285/55/22 would maybe fit on stock wheels with a 2.5" level, maybe need a little trimming or a small BL. It's about the same size as a 275/65/20 and lots of people fit those with just a level.

 

The 325/50/22 would be rubbing all over the place on stock wheels because of the width. Height might clear with a level and BL.

 

 

Thanks, those are perfect. If you get tired of them, I'm in NJ too. I've got a nice set of 305/55/20 Nitto Trail Grapplers and Procomp rims to trade!!!

 

 

 

 

 

When you say 285/50/22 would fit easy, do you mean that it would fit a stock suspension with no leveling? I would be using OEM 22" wheels.

Edited by rtr16
Posted (edited)

I wish I had known 20x10s with 33 12.5s would fit my truck. Looks dope.

I have the same setup (33x12.5 -19) but I have different wheels and tires. That's a good lucking truck!!

Edited by grapedrinkesha
Posted (edited)

I have 20x9 fuel Mavericks +20. Any idea if 33x12.5 will rub too much?

 

I have the same setup (33x12.5 -19) but I have different wheels and tires. That's a good lucking truck!!

Edited by GMC207
Posted

I have 20x9 fuel Mavericks +20. Any idea if 33x12.5 will rub too much?

 

To be honest I'm not 100% but I can say that I didn't rub too bad but still trimmed plastic. With your offset I would think you would clear suspension and would just be rubbing plastic if anything.

Posted

After going through all these pages I never could find the setup I went with

 

Bilstien 5100 level shocks up front only. 20x9 with +1 offset fuel coupler. With 275/60/20 Goodyear duratrac tires. Slight rub at full lock. I zip tied the wheel liners back and no more rub.

Perfect!

 

Sent from my Nexus 6 using Tapatalk

Posted (edited)

I have a 2016 Chevy Silverado midnite with rough country leveling kit. Will these rims and tires fit 22" Fuel Mavericks w/ 33" Nitto Terra Grappler g2? I have the painted GM mudflaps and dont want them to rub but can a good deal on this setup. Sorry if question has been asked before.

Edited by snowman44
Posted

Need some input please. Im currently running 20x10 -12 on 305/55 Nitto trail with a 5" lift and also added .5" to make it sit level and have more than enough clearence. I am wanting to switch to either Toyo At II's or RT's for my next set but want to run 295/60 instead of 305s. Also for those of you that have AT II's and RT's do the ride quite? The Nitto's make more noise than I want and also rides rough IMO. If I added 5100s would that help with the ride quality???? Thanks!

Posted (edited)

post-157488-0-81130300-1468548804_thumb.jpg

 

click image for full size

 

2" level kit, stock tires, 17" rims

post-157488-0-81130300-1468548804_thumb.jpg

post-157488-0-81130300-1468548804_thumb.jpg

post-157488-0-81130300-1468548804_thumb.jpg

Edited by 15silver
  • Like 1
Posted

 

1. I don't know

 

2. I have the RC 2.5" level and 20x9 0 offset rims with 295 55 R20 tires. The only rub I get is on the driver side in reverse on my mud flap. If the mud flap wasn't there it would clear. Having said that, you'll be fine at 0 offset, and at +14 offset you should have even more clearance. As far as I know, negative offset is where you run into rubbing problems, so going up in offset should give you more room.

 

Jake

You think I would clear with no rubbing at all on or off road, or full crank with +18 295/55r20? I will go 285/55 if I have to but I just want the tires at minimum flush or slightly poked from fenders and I am worried 285 at +18 offset won't poke and I think 295 would just overall look better.

Posted

Does anyone have any pictures with a 4" lift with 20x10 (offset around -6 to -24) or 20x12 (same offset) and 33's?

 

I've searched a lot and having a hard time with this exact setup.

Posted

You think I would clear with no rubbing at all on or off road, or full crank with +18 295/55r20? I will go 285/55 if I have to but I just want the tires at minimum flush or slightly poked from fenders and I am worried 285 at +18 offset won't poke and I think 295 would just overall look better.

 

yes you should clear easy. At 0 offset my 295's poke out about an inch. +18 will probably exactly even with the wheel well I'd guess. you could always get spacers if you're not happy with the stance

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,364 Guests (See full list)


  • Latest Articles

  • Posts

    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
    • Do you have access to BP fuels? Some stations have Silver 91 E-0 priced the same as their 93 E-10.  There is a local Marathon with 90 alky free for $6 a gallon but I go down the road to BP for $5-ish. They also have a 100 E-0 but that stuff is $10 a pop. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...