Post your 2014+ wheel/tire set-up

pepsipopper2001 · August 29, 2016

This weekend installed RC 2.5" with Duratrac 295/65r18. With the Tahoe gunmetal wheels.

Sent from my XT1080 using Tapatalk

bcbz71 · August 29, 2016

This weekend installed RC 2.5" with Duratrac 295/65r18. With the Tahoe gunmetal wheels.

Sent from my XT1080 using Tapatalk

Finally, someone running the "perfect" tire size with a level.

Tell us a little more about this setup. Are those rim stock +24 offset? I'm curious if the inner sidewall bulge is coming close to the UCAs at full lock. Also, any rubbing to the swaybar at full lock?

Awesome looking rig.

pepsipopper2001 · August 30, 2016

Finally, someone running the "perfect" tire size with a level.

Tell us a little more about this setup. Are those rim stock +24 offset? I'm curious if the inner sidewall bulge is coming close to the UCAs at full lock. Also, any rubbing to the swaybar at full lock?

Awesome looking rig.

Thanks, there is very slight rub on the sway bar at full lock. So little that i couldn't tell, only way I found out was looking under cab while doing oil change. Yes those are stock wheels +24 offset off the new tahoe.

Sent from my XT1080 using Tapatalk

bcbz71 · August 30, 2016

Thanks, there is very slight rub on the sway bar at full lock. So little that i couldn't tell, only way I found out was looking under cab while doing oil change. Yes those are stock wheels +24 offset off the new tahoe.

Sent from my XT1080 using Tapatalk

Thanks for info. How about rubbing on the upper control arm at full lock?

Noise level? Some people complain the cornering is squishy with Duratracs. What is your experience?

Bryan Catrina · August 30, 2016

20x9 +18 offset LT295/55r20 Toyo Open Country AT 2

Mrrr Rippin · August 30, 2016

2015 silvy. Fuel mavericks 20x9 20mm offset. 33x12.50-20 gladiators. 2in rc level. No scrubbing at all. Putting on 295x60-20 cooper stt pros and 3.5 glorified level Thursday.

Sent from my SAMSUNG-SM-G891A using Tapatalk

Mrrr Rippin · August 30, 2016

Sent from my SAMSUNG-SM-G891A using Tapatalk

pepsipopper2001 · August 30, 2016

Thanks for info. How about rubbing on the upper control arm at full lock?

Noise level? Some people complain the cornering is squishy with Duratracs. What is your experience?

There is no rubbing om the UCA.

noise level- they hum a little down the freeway, but with the radio down pretty low blocks it out.

Duratracs- I like them, squishy cornering? i dont notice anything like that. it's a truck not a track car. lol

Overall i love they way it looks and feels, i will be upgrading my shocks in the near future to some bilstein.

Edited August 30, 2016 by pepsipopper2001

5RWill · August 30, 2016

So for those wanting to know i emailed method about them offering their Titanium finish in other wheel sets and the answer was no only Grid...

SkiBum5.0 · August 30, 2016

^ shoot - I do like the Roost in bronze though

litetech · August 31, 2016

Hi there,

I am looking to get these Method NV 18"x9" with 275/70R18 Falken Wildpeak AT3, I only have a RC 2" level, do you think -12 offset would rub or not. I think +0 would be ideal, but these wheels are only available in +18 or -12. Anything information would help. Thanks in advance. - Kenneth

tyrich88 · August 31, 2016

Hi there,

I am looking to get these Method NV 18"x9" with 275/70R18 Falken Wildpeak AT3, I only have a RC 2" level, do you think -12 offset would rub or not. I think +0 would be ideal, but these wheels are only available in +18 or -12. Anything information would help. Thanks in advance. - Kenneth

You could go with 17s and a 285/70/17

Almost the same height and a tad wider

Thats what i'm looking into.

abominable z71 · August 31, 2016

Hi there,

I am looking to get these Method NV 18"x9" with 275/70R18 Falken Wildpeak AT3, I only have a RC 2" level, do you think -12 offset would rub or not. I think +0 would be ideal, but these wheels are only available in +18 or -12. Anything information would help. Thanks in advance. - Kenneth

You will definitely rub the liner at full lock at the very least. Probably can get away with zip tie method to clear it. 285 65 18 on 18x9 -12 fuels rubs with 2-1/2" level but only the felt easily fixed with a zip tie.

Rawyzf · August 31, 2016

You could go with 17s and a 285/70/17

Almost the same height and a tad wider

Thats what i'm looking into.

Exactly what I run with RC 2" level. No rubbing.

Sent from my SM-G930V using Tapatalk

litetech · August 31, 2016

You will definitely rub the liner at full lock at the very least. Probably can get away with zip tie method to clear it. 285 65 18 on 18x9 -12 fuels rubs with 2-1/2" level but only the felt easily fixed with a zip tie.

Thanks for the info, the zip tie method would work with me. I got a great deal on those tires, just looking for wheels right now.