Jump to content

Recommended Posts

Posted

Im in the industry (ex OEM dev guy) tuned many a prod vehicle over the years (mostly european)

My $0.02 worth ......

 

Personally Id go Bilstein everytime .. done plenty of work with Billy guys ... great product and they know their stuff

I have Bilsteins on my 993 Porsche (stock Monroes done at 20k) (I track it, so its worth the cash to do)

The wifeys Mazda 5, Monroes (rear ) failed at 11k .. (KYB's still running after 65k further )

Had plent of other experiences also ..

In short .. every experience with Teneco branded equip has been very poor .. both performance spec and longevity ..

Cheap is for a certain market ...

 

Nuff said .. Its my pers opinion - hope I dont offend ..

  • Like 1
  • 1 month later...
Posted

I have a 2014 1500 Z71 and I thought the stock Ranchos were too harsh. I replaced the front and rear shocks with the 4600 series Bilsteins and didn't like the ride, again too harsh. I swapped out the rear Bilstein shocks with some stock shocks off of a regular 4x4 2014 1500 non-z71 and left the front Bilstein shocks on. Took it for a test drive and loved it. I don't do a lot of heavy hauling or towing otherwise I think the rear Bilsteins would have been fine. The front Bilstiens are absolutely perfect and the rear, non-rancho, regular 4x4 shocks (tenneco black tube) work great for the rear for what I use the truck for. I highly recommend the front Bilstein upgrade for a comfortable and controlled ride, the rear Bilstein shocks just were not for me.

  • 3 weeks later...
Posted

I recently lifted my truck and upgraded to Fox Factory Series shocks, 2.5 coilovers up front and 2.0's in the back. The ride is way better than with the stock rancho's

 

 

Sent from my iPad using Tapatalk HD

Posted

Rancho 9000XL's all the way around. Front set at 6, rear at 4. No more bouncy ride. The adjustable damping works decent tweaking the ride for when I fill the bed up with a lot of weight. Huge improvement over any of the factory shocks.

Posted (edited)

I have always found Bilsteins to ride like garbage honestly.... may as well have a chunk of 2x4 bolted from the frame to the control arm or rear end. That's my experience over the course of 3 different trucks with Bilstein 5100's now so I won't buy them anymore. The Ram half ton is okay with them but very stiff...... my 04 3/4 ton rode like crap either way so the shocks didn't improve it's ride or bounce control and now this old stock suspension 170000 mile 1500HD rides worse with new Bilsteins than it did with 80000 mile KYB's.

 

The best riding shocks I ever had wereKYB Monomaxes... and I regret replacing my 80000 mile kybs with these 5100 Bilsteins as even with 1200 lbs in the bed constantly 10000 miles later they are still stiff as a board. Conversely my 2015 Silverado I just bought rides like crap for an empty half ton and it's an non z71 LTZ... we will see if my tool box load improves it's ride at all. This is coming from someone who dailies a 2005 1500HD Sierra... so I know what a stiff ride is especially since it's the truck I have the Bilsteins on currently and will probably be taking them off and ordering more KYB's..... That 2015 half ton doesn't really ride any better than this 1500HD and I have a lot more suspension ( evident by towing with both) than this new half ton.... so there is no excuse for such a shitty ride quality beyond the shocks and struts. Bilstein shocks... Duratrac Tires and Detroit Trutracs are all things I find love for on forums and never in real life lol.

Edited by 1994Vmax
Posted

I have had many sets of Bilstein and currently have them in my truck. They were an improvement over the factory Ranchos, plus I needed extra length so the 5100 is what I went with.

 

I have not ran many others to compare other than 1 set of Pro Comps in the past on a different pickup.

 

Sent from my SM-N910V using Tapatalk

Posted (edited)

Factory Rancho shocks are complete junk!

 

Bilsteins are a night and day difference!!!

 

Shocks and tires should be swapped before even taking delivery of the truck.

Edited by SMiller
Posted

Factory Rancho shocks are complete junk!

 

Bilsteins are a night and day difference!!!

 

Shocks and tires should be swapped before even taking delivery of the truck.

 

totally agree - Ranchos are not the best shocks to go with - replaced my stocks with Bistein 5100s when I leveled out the truck - even better ride than I had before....I agree with some of the other posters too, the Goodyears tires are not the best - wish I had Continentals on the truck instead!

Posted

I had icons on my last truck, and I just ordered them for this truck. The ride is amazing, night and day. I will report back after the install.

 

Mike

Posted

Think I'am going to try the fox 2.0 or 2.5 coil overs. I changed out the stock ranchos about 6,000 miles ago to the oem black shocks they don't jar quite as bad as the ranchos but still not the ride I'am looking for. I want to stop the banging of the front end on some potholes and other sharp drops. This is the only truck I have every had that does this. Going to talk with fox and see if I can send them back if their coil overs do not stop the banging out on the front. To much money to drop if they don't help the problem.

Posted

Can't remember if I have posted in this thread. So il add my 2 cents anyways.

 

I switched over to Bilstein 5100s several months ago from the OEM rancho shocks and could not be any happier. The bilsteins really tighten up the truck, but not to the point of being harsh. They handle bumps and dips a lot better. Overall the truck seems better planted on the road. As best as a lead sprung rear end can get. IMHO.

 

Anyone looking to make the plunge, I say it's worth the money.

 

 

Sent from my iPhone using Tapatalk

Posted

Think I'am going to try the fox 2.0 or 2.5 coil overs. I changed out the stock ranchos about 6,000 miles ago to the oem black shocks they don't jar quite as bad as the ranchos but still not the ride I'am looking for. I want to stop the banging of the front end on some potholes and other sharp drops. This is the only truck I have every had that does this. Going to talk with fox and see if I can send them back if their coil overs do not stop the banging out on the front. To much money to drop if they don't help the problem.

While those are some awesome shocks and the 2.0's are a improvement over the Bilsteins I have to ask why on a stock 1500? The Bilsteins will do a perfect job on this application, seems you are throwing a lot of money away and will never get to take advantage of the better shocks in this case.

Posted

For me, having had bilsteins, and then changing over to Icons on my last truck. It was a no brainer. Same with fox or king. IMO, you get what you pay for. I don't have mine on my new truck yet, but I expect them to perform like my last truck. And it was money well spent.

 

Good luck,

Mike

Posted

For me, having had bilsteins, and then changing over to Icons on my last truck. It was a no brainer. Same with fox or king. IMO, you get what you pay for. I don't have mine on my new truck yet, but I expect them to perform like my last truck. And it was money well spent.

 

Good luck,

Mike

Yep I have read where some were not happy with the bilsteins because they were just as stiff or stiffer than the stock ranchos. I want to try the fox have not read anything on the icons but would try them if they would do the job. Which ever I try will talk with the company before I purchase to see if they can be returned if they don't deliver the ride I'am looking for. But I'am thinking your not going to change the ride to much on these trucks its sort of you got what you got but hope its possible . The highway ride is good to me its just off road I'am tired of the jarring and banging out in the front end. This is the only truck I have ever owned that does this.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,691 Guests (See full list)


  • Latest Articles

  • Posts

    • I’m definitely interested to hear the end result here. 
    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...