Jump to content

Recommended Posts

Posted

First time to upload pic. Hope this works.

 

 

attachicon.gif0830142204a.jpg

I just bought some relays today at RadioShack, I was planning to do this mod but I am not sure where to put these diodes. Where do I find all those wires? Hood, side door panel?

 

Thank you,

-Dylan.

Posted

I just bought some relays today at RadioShack, I was planning to do this mod but I am not sure where to put these diodes. Where do I find all those wires? Hood, side door panel?

 

Thank you,

-Dylan.

Under driver side dashboard. Tucked up under the dash. Not the big black box on the forward firewall

Posted

Does anyone have the link for the fogs on with high or can just tell me what other slot to put the other end of the diode in. I can't quite make it out in the picture that is attached. What color wire do the 2 ends go in?

Posted

Did this tonight with just a piece of wire covered in Heat Shrink and push in metal ends. Works like a charm

  • 3 weeks later...
Posted

Anyone notice that at times the mirror LEDs simply don't light up at all or are very dim? I had another member ask me about it, no more and more curious as it's becoming more frustrating daily to wonder if this mod will work right?..

Posted

does anyone know what slot the reverse and puddle lights are? I've got the new tow mirrors and have that 2 led in the mirror hooked to my puddle lights right now. if i could just jump that connection under the dash that'd be a lot easier then running a straight wire all the way through the door panel and grommet and whatever like i had to do for the amber markers to blink and be running lights

Posted

does anyone know what slot the reverse and puddle lights are? I've got the new tow mirrors and have that 2 led in the mirror hooked to my puddle lights right now. if i could just jump that connection under the dash that'd be a lot easier then running a straight wire all the way through the door panel and grommet and whatever like i had to do for the amber markers to blink and be running lights

Yes I did it in the tow mirror thread. I'll see if I can dig up the info, I know the cargo light wire is the grey with light green stripe and I think it's in the first connector all the way to the left (closest to the parking brake)

Posted

Yes I did it in the tow mirror thread. I'll see if I can dig up the info, I know the cargo light wire is the grey with light green stripe and I think it's in the first connector all the way to the left (closest to the parking brake)

ok that'd be great thanks!

  • 2 weeks later...
  • 2 months later...
Posted

I have tried twice to get this mod to work so that the leds on tow mirrors will turn on. I can not get that puddle light to turn on tho :tear:

  • 4 weeks later...
Posted

I just did mod. I was getting a little frustrated cus every time I would try to push the lead inside it would bend. Finally got it done and it works great.

 

2014 Silverado 2WT CC Summit White 4.3L V6

DROPKICK Edition

IG: jorge_dropkick_rangel

Posted

Anyone with Tow mirrors have issues with the LEDs in mirror flickering on one side?

 

 

Sent from my iPhone using Tapatalk

  • 2 weeks later...
Posted

First time to upload pic. Hope this works.

 

 

attachicon.gif0830142204a.jpg

Did not work for me. The Cargo light will come with reverse lights on when I hit the unluck on key fob but when truck is in reverse no reverse lights come on or no cargo lights. I have the correct diode part and installed just as your picture?

Posted
Okay so I was inspired by 2 threads here, one being the fog lights on with high beams, which I did and love. The other is a thread about putting a switch in the bed by the tailgate to turn on the cargo lights. That's a great idea but I wanted something simpler, so using the info in the fog light thread, and the link to the wire diagrams, I found the relay switch wires for the cargo lights and the reverse lights then used an extra diode from the fog light trick to connect the two. Now when it's dark and you unlock your doors with the remote, which activates the headlights and reverse lights, the cargo lights come on as well. This does activate the lights by the third brake light as well as the lights in the bed, just as if you pushed the switch on the dash. This is going to activate the cargo lights when you put the truck in reverse also, which will provide more light behind the truck, but it may glare off the rear window as well. I will be testing this tonight to see if I like it or not.

 

The reverse light relay wire is in the same brown plug as the fog lights. Number 26, its brown with 2 blue stripes.

 

The cargo light relay wire is also number 26, brown wire white stripe, but it's in the pink plug to the left of the brown plug.

 

I used the other diode from the 2 pack I bought to do the fog lights ( part # 1N004). The stripe goes toward the cargo lights in the pink plug.

 

As long as there's not too much glare to see while reversing at night then this should be a handy little trick!!

[/quote Hey so this should work on a 2015 as well right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Google converting 98 4.3 spider injection to carburetor if all else fails. 
    • My centre console USB ports haven’t been working and the one in the glovebox is starting to act up. When I plug my phone into the cord the radio will go black and stop playing, and the CarPlay is inconsistent.   I checked the fuses and they were fine. I changed the USB port out and still nothing. Hoping for some advice on what I should be looking at.  
    • The truck is a 1995 Chevrolet S10 Blazer, 4.3 VIN "W" engine. :cracks knuckles:   On a whim - because I needed a headache - this truck was for sale so I stopped to take a look. Doesn't run. Well, it does, but barely. Long crank, choppy idle, bad misfire(s), it REEKS of fuel. I can DO this..I'm thinking. Diamond in the rough. One owner until last year. A young guy is selling it, he bought it 6 months ago. It stranded him more than once, he's got a newborn. It was in the shop 10 days ago and he "thinks" they said it needs a new fuel injection system. He can't put any more money into it, needs it gone. I was thinking of upgrading my Macbook, which is a total want, not a need. For less than the price of a new laptop I can have fun for months tinkering on this truck and enjoying it. I'm taking this truck home. The guy was beyond thrilled, his wife was there, she thanked me profusely, I could tell they were hurting. They seemed like good people in a bind.   Some parts, a wash, maybe a set of tires, and I can have a few months of fun and then turn it for beer money (or the next project).   Sure enough, there's a work order from a shop last week in the INCHES of paperwork on this truck dating back to when the first owner bought it. They put a new distributor in it, fuel injection work describes basically opening the plenum and putting it back together. He said he couldn't afford any more work so he had them button it up and that's when he put it up for sale.   I'm not well versed in 4.3. I did discover 1995 uses the 1992-1995 SCPI "Spider" injector which is riddled with issues from splitting lines, clogged or cracked poppet valves and plastic spider legs that crumble over time. Cool. I'll just order me a ne---. Oh, the auto parts store doesn't have it? Rock Auto doesn't have it. eBay? $$$$$$ for used. These are UNAVAILABLE period end of story unless you know "a guy" who's still got one in a box somewhere.   Can't upgrade to the '96-'04 injector, it's a different plenum, wiring/pinout and sensor config.   There are a few kinda "know a guy" -guy rebuild services for these injectors out there for about $350. Okay, Okay... I'd like to know if anyone has used them? Anyone got a lead on these crappy 92-95 spiders?   I also don't want to send MY spider to Narnia and back without knowing if that's truly the problem. I guess I'll need to pull apart the plenum and do some digging.   I was also thrown for a loop. This 1995 model year truck has an OBD-II connector. The interface is decidedly not OBD-II. I can read and reset trouble codes and view live data, but there's not a lot of data. Like misfire count and on what cylinder, that's not there. It's OBD-1.5.   Nothing is ever easy. Now it makes sense why this guy wanted to disappear this thing for cheap. I'm guessing the shop told him the injector is toast, the part is unobtainable and they're not going to sort sending the thing to a rando offering rebuild service on craigslist, and the kid likely can't be without a working car for 3 weeks even if they'd facilitate that.   Experience with these early SCPI's? Stories? Things to check? Sympathy? (..Nah...)   This can sit until I sort it. But I haven't had a problem with a vehicle I couldn't easily solve in a long time.    
    • I have four that read by the dash 8 to 10% better than miles/pump calculations and I have one that is spot on. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...