Installed ADD W1 Oil Catch Can

Silverado-Hareek · February 17, 2015

@Holy smokes thats 3/8" hose right?

The RX catch can comes with 3/8" hose from the seller.

haider320 · February 17, 2015

The RX catch can comes with 3/8" hose from the seller.

Yeah, but the ADD 1 is $115.00 cheaper. lol

Silverado-Hareek · February 18, 2015

Yeah, but the ADD 1 is $115.00 cheaper. lol

Sorry I didn't mean it that way I was just confirming that you should use 3/8" hose. The nozzles on the engine itself are 3/8" diameter.

Holy Smokes · February 18, 2015

@Holy smokes thats 3/8" hose right?

Correct. 3/8" hose. The hose that comes with the ADD W1 kit is junk and too short for just about anything.

I used 3/8" transmission hose (225psi rated) that ran about $4.60/LF. So, I have about $35 invested in hoses.

Checked my OCC again today and the cold temps here really cause alot of condensation to collect. Prob have another 1/8 cup over the last 5 days.

Edited February 18, 2015 by Holy Smokes

EPIC CAJUN · February 20, 2015

Installing this today and I must have missed what side is the engine goes to the inlet/outlet.does it matter?

07Softail · February 20, 2015

PCV side goes to the inlet, and outlet to manifold.

RT

EPIC CAJUN · February 20, 2015

Got it thanks!

Sent from my iPhone using Tapatalk

EPIC CAJUN · February 20, 2015

Just finished the install. Man am I glad I did a catch can. I cleaned the throttle body while I was in there. I literally had oil dripping from it. It was completely dirty and full of grime.

That was just the bottom of one side. It took 4 shop towels to get all the shit off and clean.

And the catch can

I currently have 8400 miles at time of install. I'll be keeping a close eye on the oil can and reporting back to this thread.

Sent from my iPhone using Tapatalk

Edited February 20, 2015 by EPIC CAJUN

Asells · February 27, 2015

Just got mine today! Anybody have a step by step on how to, where the lines go.

07Softail · February 28, 2015

PCV line from under the Throttle Body goes into the catch can and the outlet goes to the side of the intake manifold.

RT

Asells · February 28, 2015

I just want to clarify what goes where. This stuff is new to me. If you look in my pictures below. Do i have them circled right or the other way around.

LongrangeLauber · February 28, 2015

I just want to clarify what goes where. This stuff is new to me. If you look in my pictures below. Do i have them circled right or the other way around.

Asells · February 28, 2015

Since i have the add catch can the inlet and outlets are a little different. So outlet goes to the one under the throttle body and the other one goes to the manifold? Also do i have to disconnect the battery for when i take the throttle body off?

LongrangeLauber · February 28, 2015

Since i have the add catch can the inlet and outlets are a little different. So outlet goes to the one under the throttle body and the other one goes to the manifold? Also do i have to disconnect the battery for when i take the throttle body off?

Yes outlet goes to under the throttle body. It wouldn't hurt to disconnect the battery. I personally haven't installed a catch can (plan to soon), but since it is an electronic throttle body I would say yes

Asells · February 28, 2015

Yes outlet goes to under the throttle body. It wouldn't hurt to disconnect the battery. I personally haven't installed a catch can (plan to soon), but since it is an electronic throttle body I would say yes

Thanks for help!