Jump to content

Fuel MPG in the 6.0 engine?


Recommended Posts

  • Replies 195
  • Created
  • Last Reply
Posted

Lifetime average after 41,900 miles has been 9.8 mpg. Thats towing each day or moving snow..

  • 3 weeks later...
Posted

I average 12.6 - 13.0 mpg empty (depending on the wind) going to the lake. It's a 60 mile trip with a combination of 2 (55 mph) and 4 (65 mph) lane roads and three towns where the speed limit is 35 ish and there are a couple of stop lights.

 

Pulling the boat, I got 10.0 mpg. The boat weighs about 4700 lb.

 

My 2016 DMAX got 15.0 - 15.6 mpg empty and 12.6 mpg pulling the boat. I didn't notice any difference between the trucks in how the boat pulled. Being only 4700 lb I wouldn't expect to. When I was using my 2014 1500 with the 5.3 there was a definite difference. The 1500 didn't brake as confidently and getting up to speed meant thrashing the crap out of the 5.3.

  • 1 month later...
Posted

Since I levelled the front and did 295/60R20s it's like 11 mpg average.  It's a gas pig HD... who cares lol.  Since my 17 has 3.73s next on my list is 4.56s and a Detroit Locker in the back... that should get stabilitrack throwing fits.

Posted
9 hours ago, SierraHD17 said:

Since I levelled the front and did 295/60R20s it's like 11 mpg average.  It's a gas pig HD... who cares lol.  Since my 17 has 3.73s next on my list is 4.56s and a Detroit Locker in the back... that should get stabilitrack throwing fits.

You would be my hero if you installed 4.56's, these trucks should come with them as the 6.0 does not have the power to hold 5-6th gear, might as well gear it down and make the two overdrive gears useable.

Posted
You would be my hero if you installed 4.56's, these trucks should come with them as the 6.0 does not have the power to hold 5-6th gear, might as well gear it down and make the two overdrive gears useable.
I'd be interested in seeing the results...

Sent from my SAMSUNG-SM-G900A using Tapatalk

Posted
11 hours ago, SierraHD17 said:

Since I levelled the front and did 295/60R20s it's like 11 mpg average.  It's a gas pig HD... who cares lol.  Since my 17 has 3.73s next on my list is 4.56s and a Detroit Locker in the back... that should get stabilitrack throwing fits.

I just pull the antilock brake fuse. Dash is lit up like a Chrsitmas tree but no more computer driving for me :)

Posted

Yeah I hate the lights on when I am driving so I am not pulling fuses.  Most of the time it will be fine but the issue will be ice and sliding as when one rear tire locks both do because of the locker.  Both my 04 and 05 have Detroit's in them and the abs works with no alarms but you can tell it's not happy about it lol.  Probably in the new year I will look at getting the work done on it.  The worst part is I have to buy an open carrier first as the Detroit for the 14 bolt FF only comes as a lunch box type.  Provided the older 10.5 parts are the same swapping to an open should be free beyond new bearings. 

Posted
Yeah I hate the lights on when I am driving so I am not pulling fuses.  Most of the time it will be fine but the issue will be ice and sliding as when one rear tire locks both do because of the locker.  Both my 04 and 05 have Detroit's in them and the abs works with no alarms but you can tell it's not happy about it lol.  Probably in the new year I will look at getting the work done on it.  The worst part is I have to buy an open carrier first as the Detroit for the 14 bolt FF only comes as a lunch box type.  Provided the older 10.5 parts are the same swapping to an open should be free beyond new bearings. 
Let us know how it goes. I asked about this and searched on it with not much success. I considered doing this swap way back when I first got this truck. The next truck will probably be swapped as soon as we buy it.

Sent from my SAMSUNG-SM-G900A using Tapatalk

Posted

If you look at outfits like Randys ring and pinion they don't show parts available for the 2015 and newer HD trucks.  Well I am pretty sure nothing changed whatsoever since 2011... and with the rear diff in truth probably hasn't changed significantly since 1973 so I should be alright.  I'm never going smaller than the current 34" tire and might go to a 35" when these wear out so I may as well gear accordingly lol.   I don't "fear the gear" Haha.  And quite frankly this will get me out of the drone zone my exhaust currently has at like 1750 at 70 mph so it's all win!

  • 1 month later...
Posted

I'm light on the pedal most of the time. Getting anywhere between 10-12 MPG empty. 

 

My Sierra 1500 was only 15-16 in winter. I expect maybe 15 or so come summer fuel mix/temps (yeah I know...optimistic). But Love the 6.0L HD! Sure, better MPG would be nice, but I like this sooo much better than the 1500, and love not having AFM!

  • 3 weeks later...
Posted

3753A174-61DD-4C14-93D0-68D8CD0786F3_zps

 

That's 3100 miles roughly in 15 days, combination of highways and city from the prairies, through the rockies to the coast and back in a combination of weather from 40 fahrenheit and wet snow to -34 fahrenheit and just straight ice.  Computer tells me its 19.5 l/100km which is about 12 mpg. Stock Duratrac 18's, lifted about 3" front and 2" in the rear, otherwise stock.  Wallet felt like the computer was pretty close lol.  Fuel prices ranged from about $1cdn per liter to $1.48cdn per liter at one spot.

  • 8 months later...
Posted
On January 1, 2018 at 7:27 PM, Bhurt said:

3753A174-61DD-4C14-93D0-68D8CD0786F3_zps

 

That's 3100 miles roughly in 15 days, combination of highways and city from the prairies, through the rockies to the coast and back in a combination of weather from 40 fahrenheit and wet snow to -34 fahrenheit and just straight ice.  Computer tells me its 19.5 l/100km which is about 12 mpg. Stock Duratrac 18's, lifted about 3" front and 2" in the rear, otherwise stock.  Wallet felt like the computer was pretty close lol.  Fuel prices ranged from about $1cdn per liter to $1.48cdn per liter at one spot.

huh?  how many deutch marks per centiliter again?  how many yen per imperial gallon?  i am confused!  'murica!!!!!!!

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • I have A 2020 1500 5.3 8 speed. LTZ. Transmission problems since 60,000 miles. Started when I go to store in morning to get my morning coffee before work leave truck running get back in put it in drive/ rev no movement step on gas a little slams into gear. Put in neutral step on gas little shake then put in gear and gose.  Shut truck off start .. ok now at stop light stop truck after a few seconds feel a little kick if that doesn’t happen stuck in 3/4 gear shut truck off wait few seconds and start usually ok again. If you down shift manually ok as long as you get into 1st before stop. If not it kicks . I WANT A NEW TRANSMISSION. Now I want a new truck it just hit 80,000 IDK IF ILL BUY CHEVY CAUSE THEY STILL HAVE THE PROBLEM AND REFUSE TO RECALL . Oh I’ve changed the fluid and filter 3 times now. And yes used mobile 1 not ac/delco cause it’s not meeting the requirements that mobile is did use ac/delco filter 
    • Of course refrain from political debate but I myself have very dismal hope for what is all going on up here every where we turn so I nodded my head when I saw this joke.     
    • I'm looking at carpal tunnel surgery on my left hand and lumbar fusion. 
    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...