$50 and under modifications

srqtboss · August 10, 2018

Where did you buy it?

Jmiller11331 · August 10, 2018

Where did you buy it?

I got it on eBay. The only reason it was so cheap is because the stitching was discolored so I took resolve and scrubbed it with a tooth brush and it looks brand new

Sent from my iPhone using Tapatalk

Neallynein · August 10, 2018

Replaced both engine and cabin filters with the k&n filters. $41 for cabin and 45 for engine. I also bought my car. Who would think a 15 Civic si would be more for the engine filter (52) vs the truck.. very quick install though. The engine one gave me a little issue cause I couldn’t pull the old out with just 3 screws undone easily (fourth I couldn’t reach well with my screwdriver and didn’t wanna find a long one)

Deadpoollane · August 18, 2018

Incase anyone wants to know how to get your cargo lights on when reversing/unlocking

Sent from my iPhone using Tapatalk

Packers774 · August 18, 2018

added a OEM high country leather wrapped cluster visor to my truck. Alittle over $50 but close to it. I enjoy it and it lets you add whatever color leather you want.

Sent from my iPhone using Tapatalk

That’s nice! How did it install?

Sent from my iPhone using Tapatalk

sk · August 21, 2018

On 8/18/2018 at 3:09 PM, Packers774 said:

That’s nice! How did it install?

Sent from my iPhone using Tapatalk

I'm not the one who posted the mod but I can tell you that the cover just pops off (it's held in with 4 clips). Just grab under it and carefully pry up until it pops. If you have a trim removal tool kit that helps to keep from breaking the plastic studs that the metal clips are mounted to but if not just pull up carefully.

Marv88 · August 23, 2018

On 8/17/2018 at 5:54 PM, Deadpoollane said:

Incase anyone wants to know how to get your cargo lights on when reversing/unlocking

Sent from my iPhone using Tapatalk

Just did this mod today (only took a couple of minutes and a 99 cent diode) and hopefully it helps with the crappy picture quality from my backup camera at night.

6.2Midnight · August 23, 2018

Does anyone know how to make the stock back up camera come on whenever you want it to? My next question is how to make the back up camera on the Intella Haul come on faster. Currently they have a 7 second delay, per GM, plus, every time to are backing up, and need to adjust, and take it out of gear, the back up camera for IH, shuts down, and you have to wit another 7 seconds. VERY AGGRAVATING!

I added a switch to my aftermarket radio back up camera on my Avalanche, but, this is a little different...

Edited August 23, 2018 by 6.2Midnight

SirenRed16 · August 23, 2018

Does anyone know how to make the stock back up camera come on whenever you want it to? My next question is how to make the back up camera on the Intella Haul come on faster. Currently they have a 7 second delay, per GM, plus, every time to are backing up, and need to adjust, and take it out of gear, the back up camera for IH, shuts down, and you have to wit another 7 seconds. VERY AGGRAVATING!

I added a switch to my aftermarket radio back up camera on my Avalanche, but, this is a little different...

Here you go.

Sent from my SAMSUNG-SM-N920A using Tapatalk

6.2Midnight · August 23, 2018

So what if I have not had WAMS unlock it? Still feed it full time power, and put a switch in line? What about the Intella Haul cameras?

SirenRed16 · August 23, 2018

So what if I have not had WAMS unlock it? Still feed it full time power, and put a switch in line? What about the Intella Haul cameras?

I'm not sure but I remembered Phil saying he could pull the camera anytime he wanted so I went back and looked for that post. Phil also has his HMI unlocked.

Sent from my SAMSUNG-SM-N920A using Tapatalk

6.2Midnight · August 23, 2018

Phil Gamboa?

SirenRed16 · August 24, 2018

Phil Gamboa?

Yes. Look for the thread about what mod we want Phil to figure out next, in there he talks about pulling the camera anytime.

Sent from my SAMSUNG-SM-N920A using Tapatalk