Jump to content

Recommended Posts

Posted (edited)
40 minutes ago, Black02Silverado said:

Customboss, the reason UOA’s  are taking longer now in my opinion is because Blackstone went up on their pricing and now Oil Analyzer’s has a better price and they are getting a ton more customers. Plus with the better price Oil Analizer’s also includes a TBN where Blackstone did not include that. 

They told me they had multiple failures of machines in Indy thus the delay. But what you say makes sense. My pleading with Bklabs for 30 years to get FTIR has fallen on deaf ears and they are suffering finally. 

Edited by customboss
Posted (edited)

OK, here is my UOA on our 2016 Suburban with a 5.3.  This sample was taken after a 1,200 mile trip up to PA to visit my mom. I took the sample as soon as we got back home and unpacked.  I used E85 for the entire trip, about 4 tanks. I kept it topped off while up there for the most part. Also, why are my attachments like this blurry?

2016SuburbanUOAJuly2025copy.thumb.jpg.9ffd93d2a4909bf9bb9a0f7e6257952e.jpg

Edited by Black02Silverado
  • Like 1
  • Thanks 1
Posted (edited)
1 hour ago, Black02Silverado said:

OK, here is my UOA on our 2016 Suburban with a 5.3.  This sample was taken after a 1,200 mile trip up to PA to visit my mom. I took the sample as soon as we got back home and unpacked.  I used E85 for the entire trip, about 4 tanks. I kept it topped off while up there for the most part. Also, why are my attachments like this blurry?

2016SuburbanUOAJuly2025copy.thumb.jpg.9ffd93d2a4909bf9bb9a0f7e6257952e.jpg

Photo settings on IPhone or computer  lower resolution. Old Computers have terrible resolution? 

Edited by customboss
Posted (edited)
3 hours ago, Black02Silverado said:

OK, here is my UOA on our 2016 Suburban with a 5.3.  This sample was taken after a 1,200 mile trip up to PA to visit my mom. I took the sample as soon as we got back home and unpacked.  I used E85 for the entire trip, about 4 tanks. I kept it topped off while up there for the most part. Also, why are my attachments like this blurry?

2016SuburbanUOAJuly2025copy.thumb.jpg.9ffd93d2a4909bf9bb9a0f7e6257952e.jpg

Better to save it as a PDF

 

 

 

 

 

Edited by txab
  • Like 1
Posted
6 hours ago, txab said:

Better to save it as a PDF

 

 

 

 

 

I did but when you attach it, you have to click it to see it. Just wanted to make it easier by not having that extra step. 

Posted (edited)
8 hours ago, Black02Silverado said:

I did but when you attach it, you have to click it to see it. Just wanted to make it easier by not having that extra step. 

Gotcha. Are you posting directly from your phone or emailing/texting photo then posting? Some resolution is  getting reduced apparently.

 

Also this site probably cuts resolution when you save it.

 

 

Do you have a photo hosting site where you post family photos etc..? Might host there and link to it. Resolution shouldn't get cut

Edited by txab
  • Like 1
Posted

25,600 Mile Service

 

Raven

2024 Mitsubishi Mirage

1.2 Three pot and JATCO CVT

 

Pan drop and pan/magnet cleaning. 4 quarts Red Line Non-Slip CVT Fluid

 

This service is normally scheduled at 30K with all filters. I didn't change filters. Internal is a dog and cat catcher that was squeaky clean. The pan and magnets had nothing of consequences on them. The other filter is a cartridge protecting the valve body. Sort of a deal to get too. I'll catch it later. Reused the gasket. 

 

The pan, magnets and fluid were multiples cleaner than what I've seen from 10K units using Mitsubishi J4 Fluid. The fluid isn't a surprise. I change it often enough. But there was zip in the pan. No belt glitter, no clutch dust. Just a smear of lamp soot type coating. Like a candle on a mirror. And not much of that. 

  • Like 1
  • Thanks 1
Posted
8 hours ago, txab said:

Gotcha. Are you posting directly from your phone or emailing/texting photo then posting? Some resolution is  getting reduced apparently.

 

Also this site probably cuts resolution when you save it.

 

 

Do you have a photo hosting site where you post family photos etc..? Might host there and link to it. Resolution shouldn't get cut

Sent you a PM.

Posted

Windows has a "Snipping Tool" application. I opened your PDF and Snipped the data I wanted to the clipboard. Then cut and paste to this reply. Is that helpful? Looks pretty clear on my screen. I am assuming you are running Windows 11 😬

 

image.thumb.png.c1715393db41461fabb0dc0751c9fc04.png

Posted
5 hours ago, Grumpy Bear said:

Windows has a "Snipping Tool" application. I opened your PDF and Snipped the data I wanted to the clipboard. Then cut and paste to this reply. Is that helpful? Looks pretty clear on my screen. I am assuming you are running Windows 11 😬

 

image.thumb.png.c1715393db41461fabb0dc0751c9fc04.png

Thanks. I have W11 but mainly use my MacBook. I will have to see if Apple has a similar feature. 

  • Like 1
Posted

for MacOS, cmd-shft 4, then you can either use your mouse to select the area of the screen to make into a jpg, or you can then hit the space bar, and select the window to save as a jpg.  The image will briefly appear in the lower right corner of the screen, you can click on that to make simple edits or copy/delete the image, and afterwards, if you haven't deleted it, the jpg file is stored in the desktop folder.

  • Thanks 3
Posted

26,226 Mile Service

 

7/18/2025

 

2024 Mitsubishi Mirage G4 ES

1.2 liter MPFI triple / JATCO CVT

3,726 mile OCI 

 

3 quarts 4 ounces Red Line HP Euro Spec 5W40 = 2 ounces RLBIA

1 FRAM XG7317 Filter. It's what they had. 

 

Sample to the lab yesterday. Pulled at 3,573 miles. This is the oil change the radiator was compromised. 

  • Like 1
Posted

Ridgeline 165k and change. Valvoline quick lube. High mileage blend. 5K miles. No oil usage. 

  • Like 1
  • 2 weeks later...
Posted (edited)

 

Updated oil analysis 2 copy with PQ testing. 
 

Note too Amsoil PI fuel additive used @2646 mile fillup. 

On 7/12/2025 at 10:29 AM, customboss said:

I-861434 RED SUBE FE Report.pdf 1.08 MB · 0 downloads

 

2025 Subaru Crosstrek Wilderness 2.5L H4 naturally aspirated. Sube CVT AWD. 

 


6/30/25
2025 
5000 total miles 
4000 miles on Valvoline 0w20 R&P Fram 7317 test 2 on data 

test 1  OEM Idemitsu made Sube 0w16 factory sube OF 
Oil in for sequence 3 Valvoline Advanced 0w16 AC 2507 F OF 

Factory AF still in use. 
Changed Front and Rear differentials from OEM 75w90

aft to Amsoil 75w85 ( thinner more stable  better!!! ) Front diff from OEM Sube MT XTRA to Amsoil 75w85. 

Rear diff mag plug normal metal toothpaste. 
Front metal toothpaste and 40um 1/4” “ “whisker wires”!!!!!!  EXPERTS CHIME IN   

brinnelling wear rolling flat fine alloys to a thin wire??? Or worse? Did not sample as it would not show source in data. Too large. 
Drivability with Amsoil is noticeably smoother by the woman who cares for me. MPG up with driveline changes. 
 

CVT going to Amsoil progressively soon. 
 

If front diff turns out to be an issue and Sube balks on warranty I will sue them and use Amsoil to assist me as I was once a forensic analyst to Amsoil corporate before I declined.  
 

Polaris labs is horribly slow and analysts might as well be monkeys. 
 

NOTE engine oil PQ particle quantifier testing. Cheap way to watch ferritic wear particles of any size. Lower # better. 9 frigging awesome. Stop spending $$ on particle counts that are mostly oil adds folks. Engine oil terrible candidates for particle counts. Use PQ instead for $6.90 from Amsoil and Nick. @Black02Silverado
 

Apologies for mark up on PDF hands and arms useless. Dictation only way I can communicate now. 

 

IMG_8659.thumb.jpeg.f6ae1bc3adeb3f4367066337c4e71719.webp.7b809a73f1ce92ad6683ecb20f9aef90.webp

 

Update on this 2025 Subaru AWD unit my caretaker drives. Shoutout to site sponsor @Black02Silverado NICK, who set me up to get discounted Amsoil. Setup our landowners association for all our CAT , JD, and JCB roads HD equipments. Saving them. The Crosstrek is exceeding average MPG by 22%. 
HOW?
Inside first 6000 miles front and rear differentials changed to Amsoil 75w-85 signature series GL. 

CVT 4 qts drained and refilled with Amsoil CVT. 

Air filter and cabin filter changed @6000 miles. 
This is a very rough and dusty dirt/rock road environment. 
 

I did this with the 2022 TrailBoss L3B 4 turbo 4WD and saw similar improvements. 
 

We are about to head to Indiana for 50th HS reunion. Will report HWY mpg increase or other.  
 

Thanks Nick. 
 

IMG_0134.thumb.jpeg.623135c2df54d66534d8e40caeaf2aaa.jpeg

IMG_0136.jpeg

Edited by customboss
Add two FACTS.
  • Like 1
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I really wanted to go to the Fox 2.5's But they were like ~$1,500 vs ~$425 for the Bilsteins. And my research on FOX shocks was that they do not have a great reputation for longevity. I am sure they the FOX's are fantastic, but I know from experience the Bilsteins are rock solid for at least 150k miles. 
    • Conditions for Meeting a Cold Start   The ignition voltage is between 10 and 15 V. The barometric pressure (BARO) is more than 75 kPa. The engine coolant temperature (ECT) at start-up is less than 42°C (108°F). The intake air temperature (IAT) is between 2–32°C (36–90°F). The engine is OFF for greater than 6 hours or the following conditions must be met: The start-up IAT minus start-up ECT are within 12°C (22°F). The start-up ECT minus start-up IAT are within 50°C (90°F). Fuel level is between 25 and 75 %.   Circuit/System Verification Verify that all I/M System Status indicators report YES, and that no I/M Test DTCs are present.If any I/M Test DTCs are set Refer to Diagnostic Trouble Code (DTC) List - Vehicle. If no I/M Test DTCs are set All OK. Inspection/Maintenance (I/M) System Set Procedure   Warning: Refer to Road Test Warning. Note: Do NOT touch the accelerator pedal until told to do so. A change in TP Sensor angle or an increase in engine speed may invalidate this portion of the test.   Note: An I/M Test DTC will not be stored or erased from the ECU except at the end of trip processing, which occurs 5 s after ignition OFF.   Ensure that the vehicle meets the conditions for a cold start listed above. If the EVAP I/M System Status indicator displays NO, perform the EVAP Service bay test if applicable. Turn OFF all of the accessories; HVAC system, other electrical loads, including aftermarket/add-on equipment, etc., and open the hood.   Set the vehicle parking brake and ensure the vehicle is in park for automatic transmission or neutral for manual transmission.   Start and idle the engine for 2 min.   Close the hood, release the parking brake and Accelerate at part throttle to 72–80 km/h (45–50 mph) with this speed maintained until the engine reaches operating temperature, 8–10 min.   Continue operation under these conditions for an additional 6 min.   Accelerate at part throttle to 90 km/h (55 mph) with this speed maintained for 2 min.   Release the accelerator pedal for at least 10 s. This will allow the vehicle to enter the decel fuel cut off.   Safely stop the vehicle, with the engine in drive for automatic or neutral with the clutch pedal depressed and parking brake applied for manual. Allow the vehicle to idle for 2 min.   Shift the vehicle to park for automatic and neutral for manual. Turn OFF the ignition and exit the vehicle. Do NOT disturb the vehicle for 45 min.   Observe the Inspection/Maintenance (I/M) System Status with a scan tool. All of the I/M System Status indicators should display YES.   If the EVAP I/M System Status indicator displays NO, turn OFF the ignition, ensure that the vehicle meets the conditions for a cold start, and repeat steps 6-11 three more times, or until the EVAP I/M System Status indicator transitions to YES. If the indicator continues to display NO, refer to the Inspection/Maintenance (I/M) System DTC Table to identify the DTCs that did not run.   If any of the I/M System Status indicators display NO, refer to the Inspection/Maintenance (I/M) System DTC Table for the indicator which did not display YES. The I/M System DTC Table identifies the DTCs associated with each I/M System Status Indicator.   Observe the I/M Test DTC information with a scan tool. Verify there are no I/M Test DTCs present. If an I/M Test DTC is set, diagnose the DTC using the Diagnostic Trouble Code (DTC) List - Vehicle and refer to Inspection/Maintenance System Check.   Observe the engine DTC information with a scan tool. Verify no DTCs are present. If a DTC is set, diagnose using the Diagnostic Trouble Code (DTC) List - Vehicle. After repairs, perform the Inspection/Maintenance Complete System Set Procedure to verify no further DTCs are set.       Looks like one procedure to me.  Repeated as necessary.
    • My 2020 AT4 6.2 has had the valve spring issue addressed at ~200 miles, front cover/pump replaced at 18k, water pump at 34k and idler pully at 65k.  I would agree with ditching by 100k unless you elect to go with upgraded hardware...say built 10l80 and an lt4 or l8p swap.
    • I also need one of your modules for my 1993 chevy c2500 7.4 Thanks! My email is [email protected]
    • Chevy needs to do a black regular cab short box SS model with the new 6.6L.  400SS.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...