Jump to content

Recommended Posts

Posted
12 hours ago, FDHog said:

Manufacturer should've made it a toggle switch.

Well that's the trick isn't it? Was a momentary switch instead of a toggle placed there on purpose and if so why, to meet technicalities of CAFE requirements or simply because GM wanted to break customers' ba!!s....?

 

S/s is so intrusive onto the guts of the vehicle, it may have been done on purpose to trigger a diagnostic or flexing phase of system components normally flexed on startup to prevent damage from long term disuse. It's not just the hd starter and split solenoid, not just the pressure maintenance systems in the tranny, but other crazy kludges to keep the vehicle in operation/readiness during a stop cycle like the aux. electrical vacuum pump for brake booster, aux electric circulator pump for the coolant, high energy electrical capacitors, DC-DC inverter for maintaining constant voltage to accessories, servos for maintaining oil pressure on the lifters, etc., etc. when engine is in a stop cycle.

 

Absent a written assurance from any gizmo maker that they will make good for paying the cost for repair of any damage attributed by a GM dealer to the gizmo as grounds for invalidating the warranty (whether or not a valid claim). I'll pass on this and give the s/s button the finger when I feel like it.

Posted
Well that's the trick isn't it? Was a momentary switch instead of a toggle placed there on purpose and if so why, to meet technicalities of CAFE requirements or simply because GM wanted to break customers' ba!!s....?
 
S/s is so intrusive onto the guts of the vehicle, it may have been done on purpose to trigger a diagnostic or flexing phase of system components normally flexed on startup to prevent damage from long term disuse. It's not just the hd starter and split solenoid, not just the pressure maintenance systems in the tranny, but other crazy kludges to keep the vehicle in operation/readiness during a stop cycle like the aux. electrical vacuum pump for brake booster, aux electric circulator pump for the coolant, high energy electrical capacitors, DC-DC inverter for maintaining constant voltage to accessories, servos for maintaining oil pressure on the lifters, etc., etc. when engine is in a stop cycle.
 
Absent a written assurance from any gizmo maker that they will make good for paying the cost for repair of any damage attributed by a GM dealer to the gizmo as grounds for invalidating the warranty (whether or not a valid claim). I'll pass on this and give the s/s button the finger when I feel like it.

I haven’t done much research in to stop-start admittedly. I wouldn’t buy it. You apparently have. So I’ve read that simply putting your vehicle on max ac defeats the process. Wouldn’t that be the same as a switch?


Sent from my iPhone using Tapatalk
Posted
22 minutes ago, KARNUT said:


I haven’t done much research in to stop-start admittedly. I wouldn’t buy it. You apparently have. So I’ve read that simply putting your vehicle on max ac defeats the process. Wouldn’t that be the same as a switch?


Sent from my iPhone using Tapatalk

Not everyone lives in Texas. I'm not running my A/C in January in the Northeast.

You guys do what you want. It's just a switch. 

Posted
Not everyone lives in Texas. I'm not running my A/C in January in the Northeast.
You guys do what you want. It's just a switch. 

That was the question [emoji106]


Sent from my iPhone using Tapatalk
Posted
On 7/29/2019 at 8:48 AM, KARNUT said:


I haven’t done much research in to stop-start admittedly. I wouldn’t buy it. You apparently have. So I’ve read that simply putting your vehicle on max ac defeats the process. Wouldn’t that be the same as a switch?


Sent from my iPhone using Tapatalk

Maybe with a manual HVAC, but the automatic A/C will no longer defeat s/s once interior reaches set temp reaches temperature.

 

Without a switch only positive way that works all the time is to put it in L and use the toggle to go to the max gear. I place in L9 on the Traverse or L8 on the Silvy and it is in full automatic operation without s/s activating. Or if you have a sore finger, wait until vehicle in Drive shifts to top gear and drop from D to L on the fly and you're automatically in L6 or L8 depending upon the tranny.

Posted
Maybe with a manual HVAC, but the automatic A/C will no longer defeat s/s once interior reaches set temp reaches temperature.
 
Without a switch only positive way that works all the time is to put it in L and use the toggle to go to the max gear. I place in L9 on the Traverse or L8 on the Silvy and it is in full automatic operation without s/s activating. Or if you have a sore finger, wait until vehicle in Drive shifts to top gear and drop from D to L on the fly and you're automatically in L6 or L8 depending upon the tranny.

That’s even better. Before a tune on my 14, that’s what I did to keep the cylinder deactivation off.


Sent from my iPhone using Tapatalk
Posted (edited)
2 hours ago, Thomcat said:

Maybe with a manual HVAC, but the automatic A/C will no longer defeat s/s once interior reaches set temp reaches temperature.

 

Without a switch only positive way that works all the time is to put it in L and use the toggle to go to the max gear. I place in L9 on the Traverse or L8 on the Silvy and it is in full automatic operation without s/s activating. Or if you have a sore finger, wait until vehicle in Drive shifts to top gear and drop from D to L on the fly and you're automatically in L6 or L8 depending upon the tranny.

Stupid question but you don't have to use automatic HVAC, do you? I absolutely hate that "feature" in my car. 

Edited by Cpl_Punishment
Posted

I see Range has released their AS eliminator, it sure would be nicer to just unplug if your truck goes in for service.

Tom

Posted

Selling my new unused Autostop eliminator   shipped for $70  PM me,  paypal only...

Posted
On 7/31/2019 at 10:34 AM, Cpl_Punishment said:

Stupid question but you don't have to use automatic HVAC, do you? I absolutely hate that "feature" in my car. 

Didn't buy a blown out RST so I could play with a manual HVAC, mine works just fine - besides keeps the wife off my a$$ - she can keep her vents blowing warmer while I go Eskimo.

Posted
1 hour ago, Thomcat said:

Didn't buy a blown out RST so I could play with a manual HVAC, mine works just fine - besides keeps the wife off my a$$ - she can keep her vents blowing warmer while I go Eskimo.

Maybe it's a problem with my car but no matter which vents I have blowing, it will switch to the floor vents when I accidentally hit the auto button. I want my face cold, not my feet. 

 

I assume you can still have two zones going even with manual air conditioning. 

Posted
3 hours ago, Cpl_Punishment said:

Maybe it's a problem with my car but no matter which vents I have blowing, it will switch to the floor vents when I accidentally hit the auto button. I want my face cold, not my feet. 

 

I assume you can still have two zones going even with manual air conditioning. 

Just doesn't sound normal. On AUTO when calling for A/C with the cabin temp higher 80% of flow comes from the upper vents with 20% on the floor; when on Heat and cabin temperature lower 70% floor, 20% upper vents and 10% defroster vents; when set A/C or Heat is at cabin temperature the fan slows to a crawl at from all vents. One or more vents will work in Manual depending upon which button(s) are pushed. Three zone Traverse and Two zone Malibu automatic HVACs work the same way.

 

You may still have two zones on Manual but they are both pushing air at the same velocity, AUTO bleeds air from multiple doors depending upon zone.. When set temps differ and passenger temp, e.g.70 deg cabin is satisfied, passenger air flow settles to a crawl while drivers set to 60 deg continues to blow at full force out of driver's vents.

 

 

  • Thanks 1
  • 3 weeks later...
Posted
On 6/15/2019 at 11:44 AM, Jessica Lambert said:

Thanks! Here is a link that contains printable instructions AND an installation video. https://www.autostopeliminator.com/installation-19-gm-silverado-sierra.html  It took under 13 minutes when we did it for the video. We show every step.

 

Various customers have told us it took them anywhere between 15 minutes to an hour when doing it themselves. On average, we hear 25-30 minutes from most people watching the video as they install the product. Some customers have left relevant information in their product reviews here: https://www.autostopeliminator.com/store/p12/silverado-sierra-ae004.html

 

Please check it out and let us know if you have any questions. You can also email us at [email protected] or contact us through our contact page on the website.

Jessica, your instructions that are posted dont account for those with the Bose system which has the subwoofer in the center console. Do you have instructions for those yet?

Posted
4 hours ago, rosepaule said:

Jessica, your instructions that are posted dont account for those with the Bose system which has the subwoofer in the center console. Do you have instructions for those yet?

I have the Bose. The instructions worked just fine. 

I love my ASE. 

Posted
6 minutes ago, Limelight said:

I have the Bose. The instructions worked just fine. 

I love my ASE. 

Yup.  I got it with the help of Travis Lambert. I had to go hulk smash on the center console, that thing that really clipped in there

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,947
    Total Members
    8,960
    Most Online
    Sothpaw27
    Newest Member
    Sothpaw27
    Joined
  • Who's Online   2 Members, 0 Anonymous, 472 Guests (See full list)


  • Latest Articles

  • Posts

    • www.enginelabs.com/news/what-i-learned-today-bearing-clearances-vs-oil-viscosities/     www.enginelabs.com/news/oil-viscosity-can-the-numbers-be-misleading/ The Big Lie… Coming full circle to the reason Lake discusses the Porsche engines in particular. Based on the 2000 samples in the SPEEDiagnostix database, increasing the oil viscosity in these engines, even those run on the track, showed no significant difference in results.   The smoking gun was in the oil chemistry. That is where the data shows higher instances of more wear. Molybdenum was the key; the higher the amount, the less the wear. Speed postulates that higher viscosity oils have more thickeners to artificially inflate their viscosity numbers. These thickeners lose viscosity under shear, and the result is that not all oils of the same viscosity have the same shear stability.   Having enough viscosity is the most important characteristic, but according to Speed, once that required viscosity level is reached, additive chemistry matters more than additional viscosity. Speed also states, oil pressure problems on the racetrack aren’t a viscosity problem; it’s an oiling system problem. Running a thicker oil is just a band-aid for an underlying oiling system problem.
    • Can it still be Assembled II?   Viscosity on the decline by various means. Heat on the rise making that worse. Engine RPM in the tank. Smaller motors with more boost trying to emulate an electric motor. Full torque, zero rpm. Then we will triple the OCI. Argh.    But wait....there is more. LSPI has pushed a shift from Ca to Mg and as that cost more PLUS the run to lower sulfur compounds the TBN is moving in the wrong direction for the increased OCI's demanded.    That not being enough to placate a demand for a parameter they can't measure the other sulfur bearing compounds are also under attack. That would be zinc and phosphorus sulfonate compounds. To some degree those are being replaced with boron esters and others, i.e. titanium ect. All of which have shorter service lives. And there there is the "Secrete Sauce" marketing for AW adds that 'Can't be detected by UOA's" but trust me because I (the blenders) never ever lie.    Spoiler alert; ALL additives are sacrificial! Smaller amounts of the old blended with less robust versions of the new do not equal longer service lives. So what are the blenders recommending? Wait for it.......   MOVING THE GOAL POSTS! OMG      Let's declare the long standing TAN/TBN crossover irrelevant and tell people that soot is a great 'graphite' based lubricant which can aid tribo films. Wait, what? Let's declare that the standards used for oxidation and nitration were to conservative and can be expanded. Let's tell them that because GDI fuel dilution, although being a VISCOSITY KILLER and an acid generator is actually okay because we have better base oils that limit viscosity failure limits. (Said knowing this is measured in fractions of a centipoise and in bases not commonly used in shelf oils)   Lying from the heart is not just the new normal but we have a public, a very young public, that is so ignorant of the facts and so sure of their "RESEARCH" into AI driven models base in regurgitated  instead of scientific research based unvarnished, peer reviewed FACTS that the incoming guard is loosing their grip on reality and the OEM's are tickled pink while the blends bend the knee.    You have an ever limited set of tools to work with. And sooner or later those will be taken from you as the API and the EPA strangle the last remaining fluids from the system. What you have left is your wits. If you care to use them.    At some point in the very near future it will not longer be possible to do "What is best for the machine", and be replaced with "The best you have access too". You WILL be rewarded with half the life and twice the cost. That isn't that hard to predict.         
    • I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 
    • I guess no surprise my guesses were wrong !, at least now I know if I ever happen to see it grayed out in my own truck as to what is going on.    I never happened to catch my truck with it grayed out, it seemed every time I would test to see if there was an update it never found anything and yet more than once I would check to see if there was an update and there was nothing, then a day later or even that same morning I would drive to town and after more than one engine shut down in town as I did my errands it would pop up that there is an update now ready to install and the only place I have a connection to the internet is at home by wifi so its not as if it grabbed the download while driving. I don't trust these new vehicles due to all the crap they can decide to do while sitting for some days not running and run the battery down so most of the time if I know the truck will sit for a few days I plug in the battery tender I have mounted under the hood and so the only time the truck must have downloaded software was when it was sitting in the garage where the signal is awful but I have that tender plugged in and somehow it managed to download it. I honestly detest all this crap, way to easy to leave a person stranded.    Since I don't trust any of it I don't do the install of the already downloaded software until I get home and sometimes have even sat in the truck to watch what its doing as its going through the process to its conclusion as its not like it is set up that it will tell you the next time you fire up the engine that the update that was initialed actually installed or installed properly. Yes I can go into the updates and see the list. After I go through the install where I feel its safe to do so in case it breaks down as a result, I will plug in the battery tender after the fact to recharge as I don't know how much power its taking just to do the install and that can take a while for it to install. 
    • Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...