Jump to content

Post your T1 wheel/tire setup

BevoXV
 Share

Recommended Posts

Deereguy85 Enthusiast

Deereguy85

Posted
Posted

2025 Silverado LT 2.5" motofab spacer in front with suspension max UCAs. 

1.5" suspension max rear block, also roadmaster active suspension which gave about another 1"-1.5" of lift. Peak suspension sway bar relocation brackets. 20x9 4Play OE Wheels cv65 +26mm offset. 285/65R20 Firestone Destination Xt tires.

Only rubs on driver's side at the front of the wheel liner just before full lock. I think it's due to the alignment, the shop couldn't get the caster on that side as good as the passenger side. 

 

20250421_193044.jpg

  • Like 4
  • 1 month later...
  • Replies 1.2k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

BevoXV
BevoXV

I know the K2 guys have one of these threads so I figured we should too. Think it’d be useful for others. Post pics of your setup! Make sure to add specs of the wheels/tires, spacers, suspension, rubb

bamulk
bamulk

Method NV 305 18x9 -12 Offset Cooper Discoverer S/T Maxx 295/70/18 1.5 Level (Trailboss) Slight Rub on mudflap on full lock.   

BevoXV
BevoXV

Caliper clearance!

Posted Images

PureZ71 Enthusiast

PureZ71

Posted
Posted

Changed up the wheel/tires combo for 2025

 

 - Lockoffroadwheels Baja Machined wheels (17X9, -12 offset)

 - Toyotires Open County R/T Trails (37X12.5R17)

 

VxDXTqZ.jpeg

m7c7Ovh.jpegajkLOCI.jpeg

  • Like 7
Russ757 Enthusiast

Russ757

Posted
Posted (edited)

Swapped out the 4p70 22s for some 18s. 

Fuel Vapor 851 18x9 +19mm with 295/70r18 MT Baja Exp. Used a 10mm spacer and riding on a cognito 3" with fox shocks 

PXL_20250601_181130679.jpg

Edited by Russ757
  • Like 4
b1gted Enthusiast

b1gted

Posted
Posted

2025 GMC Sierra 1500, Denali Ultimate.   Just changed out my factory wheels and tires for a much better look in my opinion. The new wheels are a OE knockoff of the 22" Escalade wheel.  Tires are 305/45/22    

 

Factory height,  absolutely no rubbing whatsoever.

Pugh 2025 Denali Ultimate - New Wheels & Tires 4.jpg

  • Like 3
cseaman Enthusiast

cseaman

Posted
Posted

back once again in a T1 

fifteen52 + 285/75R17 cooper discoverer stronghold 

 

 

 

2025 Sierra.jpeg

  • Like 2
  • 2 months later...
Mack10290 Enthusiast

Mack10290

Posted
Posted (edited)

Finally the time came for new tires. Had 42,000+ on the original BFG KO2s and they weren't bald, but getting pretty well worn so I decided it was time. I will say that I was impressed with the BFG KO2s they were probably the best AT tires I've ever owned and I've owned alot of different ones. This time I decided to try a mud tire.....these are Nitto Trail Grapplers M/T:

They are 305/55/R20 and I have them on Fuel Flame Blackout rims 20X10 -18 and with the new tires there were issues with rubbing the wheel wells. I anticipated this and made an appointment at a nearby body shop for immediately after the tire purchase and mounting. it was only really a few millimeters that made the difference but they not only trimmed plastic but metal as well. The mud guards were a problem and so this time they went away completely. I had bought the mud guard replacements from Sharptruck.com and I had them installed, although they also had to be modified quite a bit.

I do really like the look of these new Nitto tires, however I would say that if someone wants a quiet ride they are not for you because they are noisy on the highway. I have not had them in the rain yet so we'll see how that goes. 

GMC Sierra Update 8-9-25 A.jpg

GMC Sierra Update 8-9-25 B.jpg

GMC Sierra Update 8-9-25 C.jpg

Edited by Mack10290
  • Like 1
  • 2 weeks later...
Scott Haggard Enthusiast

Scott Haggard

Posted
Posted

Hopefully someone can help me out here.....  got a 2020 sierra elevation does anyone know if I put a 3.5 inch rough country lift on it would I be able to run 35x12.50 with factory wheels?  Am I correct in assuming I'll have to have some spacers? I believe 2 inch would work...correct me if I wrong. 

GETGONE Enthusiast

GETGONE

Posted
Posted

Depends what your factory wheels are. 17's, 18's or 20's? And how wide. Needs to be at least 8.5" wide for a 12.50 wide tire.

  • 3 months later...
  • 2 weeks later...
SC4R3C120W Enthusiast

SC4R3C120W

Posted
Posted

New truck, 26 RST 4x4 with LZ0. came with 265/65/18 on it and I was hoping to go with 275/70/18 that I had on my last truck. Previously I had a 2020 RST 2wd with a 3" front lift (top strut spacer and 2.5" rear block) and had no issues. Was wondering if I would need to lift again to prevent rubbing.

 

If I were to lift it, would I need to invest in the half shafts that the trail boss has?  if I recall, the trail boss uses longer half shafts for reliability. 

 

 

 

 

image.thumb.jpeg.14350c97d972a869feb37339a2a377ba.jpegnew 

  • Like 1
  • 2 weeks later...
allgonoshow2 Enthusiast

allgonoshow2

Posted
Posted
On 12/9/2025 at 12:39 PM, SC4R3C120W said:

New truck, 26 RST 4x4 with LZ0. came with 265/65/18 on it and I was hoping to go with 275/70/18 that I had on my last truck. Previously I had a 2020 RST 2wd with a 3" front lift (top strut spacer and 2.5" rear block) and had no issues. Was wondering if I would need to lift again to prevent rubbing.

 

If I were to lift it, would I need to invest in the half shafts that the trail boss has?  if I recall, the trail boss uses longer half shafts for reliability. 

 

 

 

 

image.thumb.jpeg.14350c97d972a869feb37339a2a377ba.jpegnew 

 

allgonoshow2 Enthusiast

allgonoshow2

Posted
Posted
Just now, allgonoshow2 said:

I just put 305-55-20. stock rims on 2024 RST that is lowered 2 inches so you should be fine for clearance.

 

  • 2 months later...
fraleywp New Member

fraleywp

Posted
Posted

Swapped out the factory RST 20s for these factory ZR2 18s. The difference in offset is perfect for a Silverado without fender flares.

20260312_142617.jpg

20260312_142626.jpg

20260312_142641.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I am not techy at all but wondered if you have the truck running but sitting still in park as some functions gray out as soon as the truck is moving. I believe in the settings for updates you can choose for it NOT to update and I wonder by chance if maybe that was chosen before and now it won't allow you to chose to press update, I think that is back in the settings menu where it has all the items one wants on or off etc. Also I assume you have a wifi connection and checked that it has some signal strength, not that it would have anything to do with the grayed out updates choice in that case. What I am thinking out loud of here may be be of no value but thought I would suggest it, sometimes it can be the simplest thing that resolves an issue.  
    • Chuck FB
      Dave's Auto (custom engine builder) tear down of L8T

      By Chuck FB · Posted

      The so called rare failure that some certainly liked to tout ( die hard Ford fan boys ) as per the lifter failing and wiping out the cam. Back when it started happening the blame was being pointed to the lifters and honestly I never did hear anything myself conclusively one way or the other on that. Ford themselves in I believe 2024 had a technical bulletin I will call it that came out and for some engine platforms they were reprograming the engines idle speed but also they had a software update for the oil pump which then some time later was said what that software update did as to be increasing the oil pressure at idle. It is a good question if that issue was completely solved as one Ford specialist mechanic youtuber said he saw failures after that time period. Like anything there would be the variables, what oil is being used and the OCI and how much idle time gets put on an engine. I've seen some comments to claim that the L8T isn't so happy with high idle time either but I also know that companies that require their vehicle to idle a lot on the job don't tend to get the oil changed often enough for all those hours of idle time and go off of the odometer. 
    • bwiese
      Lower trims ( WT, Custom, Silverado ( aka LT )

      By bwiese · Posted

      My 2026 Silv. 1500 WT (reg cab/short bed/4wd) has the 40/20/40 with storage in lower middle seat as well as the fold-down center bolster/armrest.   With the dual glove boxes this is about as much storage as possible in a std cab IMHO. Bill
    • bwiese
      2026 Silv. 1500 WT reg cab: how many speakers do I have? Is amp module separate?

      By bwiese · Posted

      I have a 2026 base 1500 "WT" regular cab with basic Chevy "Infotainment 3" 7-inch screen/radio. How many speakers do I have If I want to upgrade? Is the audio amp separate from the radio/display unit]? [I listen to classical and it gets a bit raspy at slightly higher volumes. Don't need a sub etc.] Do I have two or 1 speakers in the doors? etc. Thanks Bill  San Jose
    • davester
      Bench seat swap for 2021-2024 suburban

      By davester · Posted

      probably won't get a response from that user, as they haven't returned to the site since making that one post.  users don't (at least I don't, and I haven't seen any setting which would notify me via say, email) get any notification other than going to this site, and checking if they got a response on their thread...

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...