Jump to content

Interior Trim Removal

Trailboss75
 Share

Recommended Posts

Trailboss75 Enthusiast

Trailboss75

Posted
Posted

Has anybody done this yet?  How difficult is it to remove the interior trim around the radio, ac vents, cup holders, doors and steering wheel?  Do they just snap off? Anyone have a video of removing it?

B3DE3B30-0326-49C3-90EB-19D0AC08C800.jpeg

Wheelguy Enthusiast

Wheelguy

Posted
Posted

In the past, the steering wheel required air bag removal and disarming to get the plastic pieces off, which were held on with torx bolts.

EinHoden Enthusiast

EinHoden

Posted
Posted

The AutoStop eliminator video shows them removing and replacing everything in the center stack.  

 

 

  • Like 1
  • 2 years later...
Dude1317 Enthusiast

Dude1317

Posted
Posted

I’m particularly interested in how to remove the AC vent chrome trim on both sides of the truck. I’ve already gotten off the radio bezel, the wood look pieces on all four doors, and both side of the center console, and the cup holder trim which required removal of the rubber insert first. I’ll be going with a two-tone of black and red to go with the truck. 

120F254B-E73D-4954-AA75-2316217BF013.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      Towing In Loose Gravel

      By KARNUT · Posted

      First off use it in the way you’re more comfortable. In working in off road situations most of my life I used 4WD low range very little. In most cases when equipped I used auto 4WD. If I wanted maximum control going up and down very steep terrain  I used low range. Especially if I was driving a diesel. Same with very rutted terrain. In very muddy or snowy conditions I wanted momentum so high range worked well for that. With gravel ramps with limited traction I would try high range first. I would want smooth even increasing speed if I was fighting traction. Low range could give you too much to the wheels breaking traction trying to move. 
    • Z45
      Towing In Loose Gravel

      By Z45 · Posted

      Having owned 4wd vehicle since the 1970s I find there are varying opinions on how to use 4wd, every owner is an expert in their minds.  IMO, 4LO is the appropriate gear and what I would use,  You have to feather the gas to avoid spinning tires and the lower the gear the better chance.  But like I said you will find those that think their method is best.  I live near a boat launch.  Yesterday there was a new Ford Maverick pulling out a pontoon boat almost 2x its size, they had no problems and they don't have a LO range.   True story. One winter day not long ago I was coming out of small town post office and there was a F150 4wd parked in front and was stuck foot deep snow ruts. I knew the lady so I asked her to put it in 4wd (wondering why in the middle of a 2-day snow storm she wasn't).  Her reply surprised me, "my husband" (the expert) told me not use that because it uses too much gas. She finally got unstuck spinning in 2wd which likely used more gas than not.  
    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • Another JR
      Towing In Loose Gravel

      By Another JR · Posted

      The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • XY74
      Roll up bed cover experiences

      By XY74 · Posted

      I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...