Jump to content

Recommended Posts

Posted

I have not had the opportunity to test this yet, but it is possible to leave the truck doors locked and vehicle running with a/c on?  I ask due to dogs.  It would be nice to be able to stop at a restaurant and lock the dogs in the truck while keeping the a/c on.  I know I could potentially keep starting with the my chevrolet app every 10 minutes, but was curious if the referenced scenario is possible.  Thanks

Posted (edited)

No the only way to do this is leave the second fob in the truck and then you only get 45 minutes to an hour, you can only use remote start twice. To lock the truck you have to use your phone or the fob the door buttons won’t work. This was done intentionally because some people were leaving the car running in the garage. It is the same for all the GM fob vehicles. There are are at least 2 other threads where this has been discussed at length.

Edited by Mountain boy
  • Like 1
Posted (edited)
5 minutes ago, Mountain boy said:

No the only way to do this is leave the second fob in the truck and then you only get 45 minutes to an hour, you can only use remote start twice. To lock the truck you have to use your phone or the fob the door buttons won’t work. This was done intentionally because some people were leaving the car running in the garage. It is the same for all the GM fob vehicles.

The method you described with the second fob sounds like a good solution.  Dogs have come up in the world, so do not want to walk out of the restaurant with a mob gathered around my truck and the police on scene :)

Edited by lord.kinbote
Posted

I have got out and locked doors with it running. Y’all saying it will eventually shut off? 

Posted

Yes it will run about 10 minutes unless you leave the fob inside. This has been discussed a lot, it is not broken GM did it on purpose.

Posted

Yup I heard all these trucks have a built in auto shut off after so much time idling.

 

I've read only solution if you want longer run time is to put vehicle in N and set parking brakes. 

Posted (edited)
16 hours ago, lord.kinbote said:

The method you described with the second fob sounds like a good solution.  Dogs have come up in the world, so do not want to walk out of the restaurant with a mob gathered around my truck and the police on scene :)

Nowadays, that's no assurance that it happen anyway. Might consider a sign in the window saying engine and A/C are on. Hopefully it will prevent some goody two shoes deciding they want to be an internet hero and save the dogs by attracting a crowd and smashing open a window (hopefully the dogs will bite their a$$ if they do).

 

A few months ago came back to my truck and some overweight hausfrau in a moo-moo was taking a video of my truck for posting on the internet offering her 2 cents commentary how some inconsiderate A-hole was parking in a disabled space without a pass. I strung together a few expletives to spice up her video along with comments that if she was as tall as she was wide and her glasses weren't as thick as her neck she might have seen the disabled pass with the damaged mirror hanger displayed at the bottom of the front windshield. Lucky for her she waddled off before my wife came out of the store......my comments must have discouraged her from posting it, but I really would have liked a copy to show my friends.

 

Just sayin'....plenty of 'em out there.

Edited by Thomcat
  • Haha 2
Posted
2 hours ago, Thomcat said:

Nowadays, that's no assurance that it happen anyway. Might consider a sign in the window saying engine and A/C are on. Hopefully it will prevent some goody two shoes deciding they want to be an internet hero and save the dogs by attracting a crowd and smashing open a window (hopefully the dogs will bite their a$$ if they do).

 

A few months ago came back to my truck and some overweight hausfrau in a moo-moo was taking a video of my truck for posting on the internet offering her 2 cents commentary how some inconsiderate A-hole was parking in a disabled space without a pass. I strung together a few expletives to spice up her video along with comments that if she was as tall as she was wide and her glasses weren't as thick as her neck she might have seen the disabled pass with the damaged mirror hanger displayed at the bottom of the front windshield. Lucky for her she waddled off before my wife came out of the store......my comments must have discouraged her from posting it, but I really would have liked a copy to show my friends.

 

Just sayin'....plenty of 'em out there.

Buy a $9 CO2 alarm . Most cops that drive Explorers have them in their briefcase.  One bit of sealer skip from the robot will give you a hole for CO2 to come in the cab.  

Posted
23 minutes ago, Windmill Greaser said:

Buy a $9 CO2 alarm . Most cops that drive Explorers have them in their briefcase.  One bit of sealer skip from the robot will give you a hole for CO2 to come in the cab.  

Have a link for these?

Posted (edited)

 I've locked mine running many times to run in at a store/grocery store etc. with no 2nd fob inside.  The horn will chirp a few fast series letting you know it was locked with engine running.  Not sure how long it will run for (said 10 mins)? So if you leave the fob in it'll run 45 mins?

Edited by mafd2
Posted

Yes it will run about 10 minutes unless you leave the fob inside. This has been discussed a lot, it is not broken GM did it on purpose.

Posted
2 hours ago, mafd2 said:

 I've locked mine running many times to run in at a store/grocery store etc. with no 2nd fob inside.  The horn will chirp a few fast series letting you know it was locked with engine running.  Not sure how long it will run for (said 10 mins)? So if you leave the fob in it'll run 45 mins?

It’s 30 minutes without the key and one hour with, or so the owners manual says.

 

FYI, you can disable the annoying horn chirps by turning off the “key left in vehicle alert” in the infotainment. Even though you are taking the key with you, that menu still turns the chirps off...

  • Like 1
Posted

FWIW  Public awareness of the dangers of leaving pets/children in hot cars has reached an all time high.  This is a good thing.  ( I appreciate some may be over zealous in their efforts to catch offenders.)  I hate leaving my dog at home and will only do so when absolutely necessary.  (Grocery shopping is an example)  All other stores, I take my dog (on hot days) into the store.  Even businesses that have signage discouraging pets will allow me to browse with my dog on hot days.   If approached by sales staff, I politely ask if it is alright because I can't l leave her in the car.   I have never been sent out of a store with my dog.  This widespread awareness includes storeowners and can be used to your advantage.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I hope to high heaven this is wrong. My Chevy farm trucks frame is lasting way longer than a newer Nissan Titan XD I got for a steal, and it only pulls trailers. A decade younger and it's frame is already way rustier than the waxed Chevy I drive across longs and ditches. Also, hasn't Ford been having tones of troubles with rusted frames? 
    • Batteries don’t always show signs of a few years ago my vehicle started fine in the morning and took me to work. After work the battery was completely dead and I needed a jump. No, I didn’t leave anything on and the battery was only a couple months old. It was replaced under warranty. 
    • AFM is confirmed in the Corvette engine, so I'm assuming the higher volume trucks will get it as well
    • If his battery was that bad I would think it would have been showing signs before this that were ignored. Stinks that it happened the way it did in rush hour traffic, but this seems like a pretty fringe scenario. I don't mind it that bad and never turn it off. The only slight annoyance for me is the slight delay between brake to gas, but I have gotten used to it and figure if it can save a little gas why not.
    • That is a good correction. I think “severity” was probably the wrong word for what I meant. What I really mean is closer to event priority, relevance, and actionability — not “this code is severe” or “replace this part.” I agree that a truck can have a lot of trivial or historical communication codes, and if the product starts pushing alerts for every stored or low-value event, people will ignore it very quickly. So the alert logic would need to be filtered. For example, I would not want a random old communication code to generate a push notification by itself. A useful alert would probably need to be based on things like: - new vs historical - active vs stored - repeated vs one-time - duration of the event - whether it happened near the driver-marked symptom - whether it happened together with voltage drop, reset, bus-off, misfire, oil-pressure change, etc. - whether the same pattern repeats under similar conditions So instead of saying “severity,” maybe the product should organize events by affected system and priority. For example: Misfire event: Show misfire counts / roughness first, then fuel trims, RPM/load, DFM/AFM state if available, coolant/oil temp, voltage, and related DTCs. Oil-pressure event: Show oil pressure first, but only in context — RPM, load, oil temperature, coolant temperature, DFM/AFM state if available, voltage, and baseline comparison. Communication event: Show which module/network/message dropped, whether voltage dropped, whether the recorder reset, whether it was active or historical, and whether it repeated. Voltage/reset event: Show battery voltage, crank/wake/sleep state, module reset, communication dropouts, and what came back online first. That also solves the display-order problem you mentioned. The main report should not always show the same fixed list first. It should show the system that appears abnormal first, and then the supporting values for that system. I also agree that the truck already has an oil pressure gauge and MIL. The point would not be to duplicate those. The value would be in showing what else was happening before and after the warning or symptom. For example, if the MIL comes on for a misfire, the truck already told the driver there is a problem. The useful part would be: - which cylinder or bank looked abnormal first - whether it happened after an AFM/DFM transition - whether fuel trims were already moving - whether oil pressure or voltage changed at the same time - whether the same pattern happened previously without a MIL On the OBD port point, I think you may be right for a consumer-facing version. OBD is much easier for the average owner: - easier install - easier removal - inside the cabin - easier phone connection - easier data download - easier to include a pass-through port for another scanner OBD is also the right place for DTCs, freeze frame, VIN, calibration information, Mode 6, and normal scan-tool parameters. The reason I was looking at ECM-side recording is that some events may be gone by the time someone plugs in a scanner, and some powertrain-side network evidence may not be available the same way through the DLC. But I agree that if an OBD-based version can capture enough useful evidence for most owners, that is probably the cleaner consumer product. Maybe the split is: - OBD/DLC version for most consumers - ECM-side version only if it proves it adds evidence that the OBD version cannot get - shop/pro version if deeper powertrain-side event evidence is actually useful So I would not want to force the inline approach if the OBD workflow solves most of the real-world problem. Your last point is probably the key product requirement: the report should be specific to the system showing the abnormality. Not “here are 50 parameters.” More like: “Misfire-related event detected. Here are the misfire/fuel/DFM/context values.” or “Oil-pressure-related event detected. Here is oil pressure compared with RPM/load/temp/baseline.” or “Communication event detected. Here is what dropped, when, and whether voltage/reset happened first.” That is a much better way to think about the report.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...