Jump to content

Recommended Posts

Posted
1 hour ago, TXGREEK said:

 


That’s a great price, I’d avoid the mud as long as you can, it’s fun getting them dirty but horrible getting it out from every crack and crevice, especially with upgraded suspension. Mine was double that cost and ZERO interest getting into mud. I hog hunt often and though the previous Nitto Ridge Grapplers did ok in wet grass and shallow mud, after just one time cleaning my truck, it’s 4wheelers from there on out. Btw, you’ve got a good looking truck, congrats!


Sent from Above

 

Meh, I have a pressure washer for the ATV's so that's ok.  I know the mud gets everywhere, but that's just part of having a truck!

  • Like 1
Posted (edited)

had probably 5 or 6 stes of offroad tires and cant ever remember running any of em below 40 PSI.....my stock silverados are at 32 which seems too "squishy" to me but they are radials with nitrogen so just haven't got to a place to fill em up a bit....in colder climate you should be able to get away with lil higher PSI as heat isn't as much a factor..... summer is different story

 

my BFG's I ran about 45-50 psi normally, and I wasn't super anal about it so, just know I ran em at that and seemed fine....if I was serious at offroading I probably would have been and dialed em in dependent on terrain....just ran em on dirt roads, trails, and hwy...

Edited by Dunn
Posted

I’ve had Goodyear, BF Goodrich, Toyo, Cooper, Nitto, and Toyo. IMO the Toyo AT2s are the best all around AT hands down.


Sent from my iPhone using Tapatalk

  • Like 1
  • 3 weeks later...
Posted (edited)

Experiencing a bit of vancouver snow now and have to say my BFG KO2’s are performing extremely well!

A trip up the local ski hill yesterday went well too with plenty of snow on the roads.

I dare say they’re performing almost as good as the dedicated winters I had on my last truck!

They have about 14,000 km on them so I’m sure as they get some wear on them maybe the performance will deteriorate?

Edited by madconcept
  • Like 1
  • 1 month later...
Posted

Started a topic about P rated vs LT too.

Love the way the 275/65R20 fill the wheel well but the E rated BFG sure makes for a rough ride.

Probably consider going down to a 275/60R20 next time just to make the ride a bit more comfortable as you’re able to get a P rated tire at that size.

Who knows maybe there will be more options in a couple years in the 275/65 size?

  • Like 1
Posted

to think we used to do this just so we could hear the tires humm on the road and liked the tougher tire to guard against flats 75 miles from nowhere....we threw on BFG's, MT, or DC and ran them...

  • Like 1
Posted
On 12/28/2019 at 6:28 PM, jimmyboy8301 said:

I’ve had Goodyear, BF Goodrich, Toyo, Cooper, Nitto, and Toyo. IMO the Toyo AT2s are the best all around AT hands down.


Sent from my iPhone using Tapatalk

I would concur!

  • Like 1
Posted

I’ve also heard good and bad things about the Toyos AT2’s but I’ve had such bad luck with two Nittos that I’m prejudice towards Nitto and his stepsister Toyo. To this day I’ve never had one bad thing to say about BFG’s KO’s or KO2’s.
My main concern is “SIPING” and not the first 10K mile break in cause most tires are pretty much good inside that then cones the harder compound which is for longevity versus traction. I’ve run two separate sets of Ridge Grapplers and both

I jumped on the “Hype Wagon too” Both sets were slipping on wet paint like as if the wet paint was grease and both sets had their siping wear out inside 15k miles, scared the crap out of me one afternoon, drove up to Discount Tire and they were shocked too at how the siping was disappearing at just 15k miles. Deep siping is where it’s at for me and I’m a BFG guy for life. Btw, the KO2’s have literally NO slipping on the wet paint in the parking lot.

Nitto Ridge Grapplers new
c462a5303b8b9415c1055a8891605315.jpg

Nitto Ridge Grapplers at 15k miles “looks like siping was an afterthought with these tires”
2e21147be190cfce74ed12d6baff884d.jpg

But not with the KO2’s, their siping runs straight through the lugs [emoji1303]
0528b6c68d4367d5df3be5a533acc0a4.jpg

There’s just so much more that goes into making a Tire than looks, chemicals used is #1 in the KO2’s.


Sent from Above

  • Like 2
Posted

I had Toyo RT's on my F250 and loved them, but I will admit they they did spin a bit when the roads were wet after I got some miles on them.  

 

I always just assumed it was because the truck had nearly 1000ft/lb of torque. 

  • Like 1
Posted
I’ve also heard good and bad things about the Toyos AT2’s but I’ve had such bad luck with two Nittos that I’m prejudice towards Nitto and his stepsister Toyo. To this day I’ve never had one bad thing to say about BFG’s KO’s or KO2’s.
My main concern is “SIPING” and not the first 10K mile break in cause most tires are pretty much good inside that then cones the harder compound which is for longevity versus traction. I’ve run two separate sets of Ridge Grapplers and both

I jumped on the “Hype Wagon too” Both sets were slipping on wet paint like as if the wet paint was grease and both sets had their siping wear out inside 15k miles, scared the crap out of me one afternoon, drove up to Discount Tire and they were shocked too at how the siping was disappearing at just 15k miles. Deep siping is where it’s at for me and I’m a BFG guy for life. Btw, the KO2’s have literally NO slipping on the wet paint in the parking lot.

Nitto Ridge Grapplers new
c462a5303b8b9415c1055a8891605315.jpg

Nitto Ridge Grapplers at 15k miles “looks like siping was an afterthought with these tires”
2e21147be190cfce74ed12d6baff884d.jpg

But not with the KO2’s, their siping runs straight through the lugs [emoji1303]
0528b6c68d4367d5df3be5a533acc0a4.jpg

There’s just so much more that goes into making a Tire than looks, chemicals used is #1 in the KO2’s.


Sent from Above


Thanks for the demo. I appreciate your experiences.
  • Like 1
Posted

Don't really need tires yet, but I'm quickly diving into the rabbit hole. 

 

Current tires are Grabber ATP 275/55/20 XL. Good tire. Been happy with them. Previous truck I ran LT Cooper atw's, Grabber AT2s and KO's. That was before the newer KO2's and Grabber ATX. 

 

I do 90% of my driving on road. We get a decent amount of snow/ice/rain. So I like having a 3 peak rated tire. The other thing is I tow a large TT during the summer months. So I want a tire that tows well.

 

My Brother loves the Defender LTX on his F150. Says it works great in the ontario winters. I also really like the look of the Grabber atx though. Do I stick with a XL tire or go to a LT? My Grabber atp are 117T load range. Oddly the same size ATP LT tire is only 115T. I'd have to go up to a LT275/60/20 to get a 119T load. And the Defenders don't even come in a 275/55/20. it would have to be a LT265/60R20/E 121/118R or a LT275/65R20/E 126/123R which Im not sure would even fit. And those are both a much heavier tire. 

 

so many questions...so much to think about lol. sigh

Posted
Don't really need tires yet, but I'm quickly diving into the rabbit hole. 
 
Current tires are Grabber ATP 275/55/20 XL. Good tire. Been happy with them. Previous truck I ran LT Cooper atw's, Grabber AT2s and KO's. That was before the newer KO2's and Grabber ATX. 
 
I do 90% of my driving on road. We get a decent amount of snow/ice/rain. So I like having a 3 peak rated tire. The other thing is I tow a large TT during the summer months. So I want a tire that tows well.
 
My Brother loves the Defender LTX on his F150. Says it works great in the ontario winters. I also really like the look of the Grabber atx though. Do I stick with a XL tire or go to a LT? My Grabber atp are 117T load range. Oddly the same size ATP LT tire is only 115T. I'd have to go up to a LT275/60/20 to get a 119T load. And the Defenders don't even come in a 275/55/20. it would have to be a LT265/60R20/E 121/118R or a LT275/65R20/E 126/123R which Im not sure would even fit. And those are both a much heavier tire. 
 
so many questions...so much to think about lol. sigh


If you don’t need a real off road tire, the Defender LTX is unbeatable. But it’s a road tire.
  • Like 1
Posted
2 minutes ago, Robotaz said:

 


If you don’t need a real off road tire, the Defender LTX is unbeatable. But it’s a road tire.

 

exactly why Im leaning more that way. I like the looks of an AT tire more though, but function > fashion lol. Also the Agilis Cross Country may be an option. Slightly narrower LT 265/60/20 though. 

  • 10 months later...
Posted
On 12/24/2019 at 8:35 AM, SquireSCA said:

Yeah, I like them so far.  Not a lot of noise, they handle great in dry and in the wet so far... We rarely get snow in GA so not sure when I will get to try that out...  Hope to get onto some muddy trails soon.  The tread looks aggressive enough and is similar to a Duratrac in that department, so I would expect it to do pretty well off road.

The stockers were the Wranger TrailRunner AT which isn't a bad tire, except that the OEM version that GM uses is NOT the same tread depth as the off the shelf version...  Else, I would have kept those for awhile.

But the tread depth stock was like 10mm at best, and so I went to Discount Tire like 5 days after I got my new truck.  They gave me credit for those tires, so the new UltraTerrains installed and balanced came to just under $800 with taxes and fees...

Are you still liking the Ultraterrains a year later?  How have they worn?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined
  • Who's Online   4 Members, 0 Anonymous, 1,414 Guests (See full list)


  • Latest Articles

  • Posts

    • Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
    • Sure about that? A degree wheel and a dial indicator would lower your degree of assurance in that statement. 😉    It why we have offset keys and dialable timing sprockets. Just say'n.... I've built a few and have never seen one "On the money". 
    • I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed, regardless of whether they are in warranty or not, or in the hands of the original owner or not. Why not updates as well, especially since some of those can be safety related also?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...