Jump to content

Steering wheel buttons

ElectriHolstein
 Share

Recommended Posts

Bigchunk27 New Member

Bigchunk27

Posted
Posted
On 6/25/2020 at 10:13 PM, Stand By said:

Have you contacted White's or anybody to see if it could be programmed?

 

On 6/25/2020 at 8:51 AM, Zelas said:

I Have swapped out my Steering wheel with a Leather wheel which has the Buttons on the right. I also have swapped the Speedometer with a High Country one. It does not work . The Cruse control buttons work however, I have to reinstall my old speedometer because I am not able to toggle thru the menus. Its a bummer because it makes a huge difference in the interior.

I think you also have to swap the 7” monitor functions out for the 8” display model. That also carries all the information for this switch to happen. I have tried this but I’ve wanted too so bad.

  • 3 months later...
  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Mac-427
Mac-427

After researching the addition of radio controls on the steering wheel, I've concluded it can't be done without a huge hassle and expense.  As an alternative, I swapped in the leather steering wheel a

Zelas
Zelas

I Have swapped out my Steering wheel with a Leather wheel which has the Buttons on the right. I also have swapped the Speedometer with a High Country one. It does not work . The Cruse control buttons

Stand By
Stand By

Have you contacted White's or anybody to see if it could be programmed?

Posted Images

Michael Heyne New Member

Michael Heyne

Posted
Posted

Did anyone find a way to add the buttons on the right?  Just got my 2021 2500HD Base and it doesnt have the volume on the right either.  The blank is there.  Can it be added?  

Mac-427 Enthusiast

Mac-427

Posted
Posted (edited)

 

After researching the addition of radio controls on the steering wheel, I've concluded it can't be done without a huge hassle and expense.  As an alternative, I swapped in the leather steering wheel and used the blank on the right side of the stock wheel that came on my 2020 Silverado Custom.  I have Katzkin leather seats so I wanted a leather wheel to match so at least I have a nice steering wheel instead of the cheezy plastic stock version that came on on the Custom trucks.  The cruise control buttons on the new wheel work fine.

 

New Leather Wheel.jpg

Edited by Mac-427
  • Like 2
  • 4 months later...
Ted Vargas New Member

Ted Vargas

Posted
Posted

Someone on YouTube added the steering wheel controls on a 2021 Silverado custom.  And harness dr has the line bus harness to add steering wheel controls. But I believe you have to upgrade the cluster as well and swap steering wheel.   

Vradcliffe Enthusiast

Vradcliffe

Posted
Posted

I was able to work with the Harness Dr on my 2021 Sierra 3500 base, to get this working. I added the programmed cluster from WAMS, a steering wheel with the menu controls on the right and audio controls on the back. We added 1 wire (now available on Harness Dr website), which required no splicing, pinned at the cluster and pinned at the clock spring harness and this gave my wheel full control. Well worth while upgrade. 

Mac-427 Enthusiast

Mac-427

Posted
Posted
22 hours ago, Vradcliffe said:

I was able to work with the Harness Dr on my 2021 Sierra 3500 base, to get this working. I added the programmed cluster from WAMS, a steering wheel with the menu controls on the right and audio controls on the back. We added 1 wire (now available on Harness Dr website), which required no splicing, pinned at the cluster and pinned at the clock spring harness and this gave my wheel full control. Well worth while upgrade. 

Hey Vradcliffe, this is a  pretty big deal for lots of us on the Forum.  Any additional detail would be sincerely appreciated.

Vradcliffe Enthusiast

Vradcliffe

Posted
Posted

Hey Mac-427, I’ll try to add some detail so forgive the long post....

the first thing I would do is remover the upper steering column cover, to expose the clockspring harness (yellow connector). If you remove the harness, you can verify if there is any existing LIN bus connection (slot 9). If there is no connection, you should be able to run a wire directly from slot 9 at the clock spring along the existing harness to slot 20 at the cluster connector. I would really recommend going to the Harness Dr. website and purchasing the wire for $26. It will come with full instructions (many of the pics are from my upgrade, just saying that as verification it worked) and it is pinned perfectly to fit in the slots. 
 

Just as an FYI, I DID NOT replace the clock spring, as I’ve seen many people believe that may be necessary for this upgrade. 
 

This upgrade has had at least 2 additional successful attempts that I’m aware of, to this point. 

98E76793-54C1-4208-99E5-49B3DDA2C077.jpeg

8C916651-6C57-451F-B425-F0040B1E1665.jpeg

Mac-427 Enthusiast

Mac-427

Posted
Posted

Thanks Vradcliffe.  I'm following this issue closely because I have the steering wheel controls that came with my replacement leather wheel so I'm at least part of the way there.

pgamboa Senior Enthusiast

pgamboa

Posted
Posted

@Vradcliffe,

 

Thanks again for your involvement in this.  Your patience and dedication to see this to fruition is greatly appreciated.  
 

Foe those looking into this, the harness can be purchased here.

 

https://harnessdr.com/product/2019-2021-silverado-sierra-steering-wheel-lin-bus-harness/
 

A few things to note:

 

A new compatible cluster swap is needed.  The new cluster needs to be custom programmed by WAMS - 2019+ (T1) Denali / High Country Cluster Upgrade Kit - White Automotive & Media Services - @GTPprix is the only company I use for this type of work.  

 

Since a new cluster is needed, might as well upgrade to the nicer Denali or High Country Cluster.    

 

A few customers have also reported that they gained radio controls (IOR) radios and have restored backlight illumination on the left side. 
 

Keep in mind, that this is still a fairly new retrofit and release - so individual results may vary. 
 

Thanks!

  • 3 weeks later...
Yep New Member

Yep

Posted
Posted
On 6/9/2021 at 12:43 PM, Vradcliffe said:

Here are the before and after photos....

I apologize, the before photo is the dealer stock photo, I didn’t take one prior to the install...

81C031C8-AC37-4B88-BB97-EA52E84D4180.jpeg

F2C8BC50-0DBD-4AB4-9197-1F8A8E27F249.jpeg

 

 

That does make for a great look. Would happen to have the website where you ordered the parts?

Thanks!

Flatblack83 Enthusiast

Flatblack83

Posted
Posted (edited)

I completed this and everything works except the heated wheel. Ordered a high country cluster from whites, wire from harness dr and a wheel from the dealer. Cost me about 1k to complete. Yes that's alot but its really nice..!! Since it's a custom the stereo bezel didn't match, I ordered the silver one to match.

20210617_181111.jpg

Edited by Flatblack83

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • Another JR
      Multigate electrical problem

      By Another JR · Posted

      The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
    • JakeD
      Tire fitment

      By JakeD · Posted

      Yes your absolutely right, I been looking at the 4 inch BDS one and it acutely states you can use the stock 20’s just not the 17’s or 18’s, I also didn’t realize that with my 275/60r20 stock wheels I’m already running 33 inch diameter wheel setup lol so I can just run my stock wheels and tires atleast to start.
    • davester
      Tire fitment

      By davester · Posted

      I would expect that to be lift-kit dependent.  If the kit has interference issues w stock wheels, then the kit/manufacturer should indicate that somewhere.
    • JakeD
      Tire fitment

      By JakeD · Posted

      That’s what I’m wondering is if the stock backspacing of the factory wheels will clear new upper control arms and such  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...