Jump to content

Recommended Posts

Posted
The video is gone.


I’m not shocked




Ryan B.
Posted

What did it violate? There are a lot of videos out there that shouldn’t be this not being one of them


Ryan B.

Posted (edited)
39 minutes ago, KARNUT said:


There’s a big problem with this strategy. You know what it is.


Sent from my iPhone using Tapatalk

That it works? :) Good problem to have.

 

Actually the problem is....

 

Too Late

:sigh: 

Edited by Grumpy Bear
Posted

For those that need an explanation. For total isolation to work there has to be a cure. Not likely. The bug that caused most pandemics are still around. Heard immunity was the beat back.


Sent from my iPhone using Tapatalk

Posted

So what's worked in US Samoa for 102 years isn't possible. Must be fake news. 

 

Your engaging

:crackup:

  • Like 1
Posted
18 hours ago, RyanbabZ71 said:

Anyone see this?

 

 

 


Ryan B.

 

 

Care to share what her big discovery was since we can't see the video? 

Posted
Just now, Cpl_Punishment said:

Care to share what her big discovery was since we can't see the video? 

Which video is this? I have A few on my phone 

Posted

I see CBS is reporting today that the governor of Texas changed the orders to release the salon owner who was jailed. Since no one who shared the original story saw fit to mention that update yet..

Posted
Just now, Cpl_Punishment said:

I see CBS is reporting today that the governor of Texas changed the orders to release the salon owner who was jailed. Since no one who shared the original story saw fit to mention that update yet..

Ah yes!!  That’s leadership right there!  

Posted
2 minutes ago, Kristy Tim said:

Which video is this? I have A few on my phone 

Whichever one Ryan posted yesterday? Something about a researcher finding out that something or other big pharma is doing is supposedly leading to pandemics. 

Posted
1 minute ago, Cpl_Punishment said:

Whichever one Ryan posted yesterday? Something about a researcher finding out that something or other big pharma is doing is supposedly leading to pandemics. 

Yep. Think so.  There was that guy in PA that was on the verge of exposing something big.  Someone killed his arse.  

Guest
This topic is now closed to further replies.

  • Latest Articles

  • Posts

    • Most online suppliers and Amazon. All have noted "not for use with Bose speakers".
    • Very interesting thread. Definitely didn’t expect to see this kind of mileage out of that engine. 
    • Just did an injector/HPFP replacement on Pepper at 192,400 miles; close enough to 200K, RIGHT? (If 200K is considered life end and to me it isn't). But hey, to each his own.    Have never run a catch can on this vehicle. Back side of every valve looked like a new valve spray painted semigloss black. Port walls looked 'neat' (all a normal result of passive EGR via VVT) Zero build up even in AFM cylinders. Just color. It uses no measurable oil and never has.    At 155,000 I put her on E-85 and a borescope of the cylinders at plug change showed very clean pistons and valve faces. The replaced injector tips looked new. (It was the pump piston seal that was leaking). Oh well, have six good backups.    Still gets 28 mpg on gas (highway average) and over 20 (highway) on alky. UOA's look good and runs as good now as it did when I bought it. Better in fact.    What improvement would a Catch Can provide this motor?     And given all this I expect that IF I installed one I'd see some water/gas/oil vapor accumulation. Byproducts of normal combustion.   Having said that, IF my motor used an appreciable amount of oil I'd consider it a useful 'crutch' until I had the situation corrected OR if bore polished, until I junked it or rebuilt it to stave off repeated plug fouling.    I'm not telling you what I THINK. But what its DONE.          
    • Love the look. I'm a SCSB lover myself.    Two items. 1.) A spacer changes scrub radius but this also changes when we use wheels of different offsets. A little isn't a big deal. 2.) Steel wheels, alloy wheels all have different thickness. Same effect on the stud and lug nut as a spacer. When hub centric the wheel isn't supported by the stud. It's supported by the hub. The stud just keeps it all together.  
    • I had a evap sol go bad a couple weeks ago. . I replaced it.  While watching live data at the time I saw I had some cylinder 1 misfires. No MIL but on live data I could see ~50 at startup and about 70 more after an hour a drive all on cyl 1.  I also noticed that the LTFT were -5% to -15% always.  And that bank 2 is always -3% richer than bank 1. Even across all driving modes, city, highway, etc it’s always 3% richer than bank 1. So I start with the misfire. Swapped coil, plug, and plug wires from 1 to 3. No follow. I got an Injector reseal kit, pulled the D/s injector rail, swapped #1 and #3 injectors, resealed them, reinstalled and retested.  The misfire followed to 3. So I ordered and replaced all 8 injectors, spark plugs, and plug wires. Also replaced the 1 time use fuel pipes under the intake manifold.  Injectors that were in the truck since new were  Part # 12668390.  I replaced them with # 12742701 Got from RockAuto. Pretty certain they’re genuine and the correct ones. I called a friend at a parts store who told me “the 12742701 were the correct superseded part # for the originals I was replacing”. So started truck after replacing all that and it’s running -15 - -30 LTFTs. I reset the fuel trims with GDS2 and drove it for a 60 miles trip each way. There have been no changes in the LTFTs.  I checked if the HPFP was leaking into the crankcase. I removed the pvc and watched the trims. No difference.  I checked the alcohol content and it was at 10%  I’m out of ideas here. Truck seems to run great. Just always rich on the fuel trims.  Anyone with any help or ideas would be greatly appreciated.  I ran an injector balance test just for the heck of it and it came back this. I’m confused.  I have gds2 and some other diag tools if anyone knows of anything I should test next.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...