Jump to content

Back-up Camera Distorted

PIP_AT4
 Share

Recommended Posts

PIP_AT4 Enthusiast

PIP_AT4

Posted
Posted

Hello All!  I do apologize if this has already been tackled.   I did do a cursory search and could not find this in the HD forum at the very least. 


We were able to finally able to pick up our 2020 GMC AT4 HD 3500 this past Saturday.  Everything with the back-up camera seemed normal the first few time we back-up up.   Then, I’m unsure if I did something messing with the setting or jostling thru the different camera views or what...but now the camera, when you go into reverse looks like this!   It is all skewed and stretched.  
 

Has anyone seen this before1. Figured I would approach y’all before spending the time going back to the dealership!

 

Any help with this would be greatly appreciated, Thank you!.  

4761FD58-E38B-4ACA-995D-95F66E1ECE89.jpeg

2020-2500 Enthusiast

2020-2500

Posted
Posted

Totally normal wide angle lens view.  My biggest gripe is that the lines don't exactly show you where you're going.  They were spot on in my Colorado, but in the 2500 they're more annoying than useful.  Dealership said there is no way to adjust it, and I haven't found anyone that can either.  Maybe someone out there knows a trick?

PIP_AT4 Enthusiast

PIP_AT4

Posted
  • Author
Posted

I would like to say too that it is normal!  But I know it worked as my 2015 Denali HD that I traded in when we first picked it up and came home.  That was this past Saturday.  Sunday is when we noticed this, when we went out and about to put a few miles on her, we got home, backed in as we always do...that was the image we got.  Its really weird and disorienting!

  • 1 month later...
TexasCW New Member

TexasCW

Posted
Posted
On 4/14/2020 at 8:17 AM, 2020-2500 said:

Totally normal wide angle lens view.  My biggest gripe is that the lines don't exactly show you where you're going.  They were spot on in my Colorado, but in the 2500 they're more annoying than useful.  Dealership said there is no way to adjust it, and I haven't found anyone that can either.  Maybe someone out there knows a trick?

I'm having the same issue with the lines being completely off (by feet) when backing up with the wheels cut.  Appears they used the 1500 programming and the HD has a longer wheelbase so you end up 3-5 feet off of where the lines started to send you.  My dealer is "looking into it" with GM engineers, but don't have a solution yet.  

2020-2500 Enthusiast

2020-2500

Posted
Posted
1 minute ago, TexasCW said:

I'm having the same issue with the lines being completely off (by feet) when backing up with the wheels cut.  Appears they used the 1500 programming and the HD has a longer wheelbase so you end up 3-5 feet off of where the lines started to send you.  My dealer is "looking into it" with GM engineers, but don't have a solution yet.  

I figured it was calibrated for another truck.  So dumb.

 

If you hear anything about a fix please please please post it here.  This is literally my biggest gripe with this truck.

  • Like 1
Tomato Enthusiast

Tomato

Posted
Posted

Mine looks nothing like that - I have a normal view without any distortion. Yours looks like it is combining the hitch view with the back up camera giving a strange view...Is it a setting or view that you might have toggled to???

Tomato Enthusiast

Tomato

Posted
Posted

I just checked, and mine looks normal with the split screen (surround view on left side).  If I remove the split screen, the rear view is distorted - system stretches the image to fit the scree.

  • 2 months later...
2020-2500 Enthusiast

2020-2500

Posted
Posted

FYI to others - there was an OTA update for infotainment that got installed on my truck a few days ago.  Seems to have fixed the camera issue.  Haven't tried hitch mode yet, but regular mode has the lines in a much better location.  They're also slight different - thinner than they showed before.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Any joy with this truck seems to be short-lived.   The CEL for P0172 ("bank 1" too rich) is now "intermittent".   I'm not sure where to check, or re-check, and my energy to keep chasing problems with junk is wearing thin. The P0172 seems to set as I'm coming to a stop, completely off the throttle, when fully warm. At least, that's what it's done the 3? times it's set.   Everything appears normal on the scanner EXCEPT long term fuel trim. There's only one bank on this vehicle because it's an OBD 1.5 with only one upstream O2 sensor. At idle, it's around -16.4% and will dip to -18% occasionally at idle or off-throttle. LTFT approaches 0 when throttle is held at 2500rpm. Short term appears normal, much closer to zero all the time. The LTFT tells me the engine is running rich at idle but compensating at higher load. But, why?   The EVAP purge valve doesn't appear to be leaking/sucking fuel vapor continuously. Is it sticking just as I come to a stop and the engine is choking on fuel vapor and sets the P0172? But that doesn't explain the persistently negative LTFT. Disconnecting the purge valve doesn't seem to make any difference.   I suppose that leaves another dang issue with the fuel injector. A leaking fuel pressure regulator, a new leak in the spider, or a leaking fuel injector/poppet valve I didn't see, or a small crack in one of the spider legs.   The vacuum line leading to the fuel pressure regulator doesn't have raw fuel in it. It doesn't even smell like fuel when it's pulled off, not until you suck air through it, then you can tell it leads to a fuel component. I'd consider that normal? Nothing is signaling this is a FPR issue from the outside, at least.   The oil smells like fuel but it's not building volume. I've noticed most oil in most engines smells like fuel to some degree so it's hard to say if the smell is an issue or not. Or if the engine just still smells like fuel because the crankcase was full of it a few hundred miles ago. But it's been changed twice since that original issue of the leaking fuel line dumping fuel into the intake.   Patience is running very thin. Every win seems to be accompanied by two steps backwards, or another issue that leads to removing at least the top half of the intake manifold. Enough! LOL
    • Chuck FB
      Tire pressure for 37s

      By Chuck FB · Posted

      First off you mentioned "Toyo Says" and then gave the pressures 45/50, was this some person at the tire shop that pulled those numbers out of his head ?   Now of course I can't know your exact axle weights front and rear, however I have much the same pickup as yourself other than not knowing your starting weight as per the pounds the truck rolled out of the factory at due to the options yours did or didn't come with or what you have added beyond the extra tire weight. The correct way to know 100% where a person is at is by weighing each axle with the typical weight the vehicle is driven with and that means taking into account passengers and making sure you figure in a full tank of fuel and a little grace for whatever you may put in the bed "groceries" !    I am looking at and not that it really matters as all the tire companies use the same charts anyway, but I am looking at the comprehensive Toyo tire chart in the section that your tire falls under and I know it sounds confusing but your tire is not an LT metric tire like your factory tire but instead because its a standard inch measured tire its under a different category called an LT floatation series tire. That makes a difference as LT metric tires they don't want to see run below 35 psi at highway speed where as with the LT floatation series it can be run down to 25 psi on the highway as long as the weight on the said size of tire is agreeable with or less than that minimum 25 psi. It blows many people away that how is this physically possible, an empty truck for one thing and larger tires with the same size wheel diameter have a lot more air volume so they can carry the same weight as the smaller tire with less air pressure.    So my truck, I have the stock 275/65R20 wheels and tires and I have a bit of weight in the box with a bak flip cover and a rubber bed mat and some tools and spare gas. The front of my gas truck weighs a bit more than some trucks of the similar spec due to double batteries and alternators. However with full fuel and just me in the truck I am weighted such that I can run 40 front and 35 rear and so that is what I have done since day one.    If I base your truck at or slightly below the weight of my truck, in theory with your tires going by the tire chart you might be right around a minimum of 30 pounds front and 25 pounds rear. Of course that would hit pretty much minimum cold inflation pressure one could run with that tire size and a near empty truck. If you have access to an accurate weigh scale to do individual front and rear axle weights I would suggest you do that and make sure your topped up with fuel and whatever else in the truck before you weigh it and then you will have a great starting point to work off of and figure out what your bare minimum pressures are you can safely run. If you do much in the way of hot weather high speed driving, bumping up a bit for a safety margin is never a bad idea but just depends on what type of driving you do. I will include the Toyo chart and the floatation series sizes start on page 31. Without a doubt at these pressures I am speculating at minimum wise for your truck, it would most certainly ride very different then it did when you were using 55 lb front and rear.     https://www.toyotires.com/media/pxcjubjs/application_of_load_inflation_tables_20200723.pdf
    • Snowcamo
      Possible lifter tick after DOD delete

      By Snowcamo · Posted

      Take an automotive stethoscope to the vacuum pump. Iirc those tick as well. 
    • rdonarski
      Towing In Loose Gravel

      By rdonarski · Posted

      This landing is worse than most. Patchy blacktop with washouts, soft gravel/sand at bottom that washes out with every heavy rain. I tell everyone to put it in 4WD. A lot of them think they can pull out their trailer in 2WD. They end up digging a hole and then putting it in 4WD.  The lake is a pristine lake and has a lot of money on it. There are several wake boats and lot of large tritoons. The people with the money don't want it improved because they don't want more traffic.    Boat Landing 1.jfif Boat Landing 2.jfif Boat Landing 3.jfif
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      How wide are your rims?   Toyo specs 8.5-10.0-11.0 inches. My thought would be rim might be pulling the tire inwards creating a center that is more pronounced.    I also noticed that the spec sheet says max 65psi. So you could be right lowering the pressure to ~40 psi. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...