Jump to content

Password required for connected services

SuperDuper
 Share

Recommended Posts

SuperDuper Enthusiast

SuperDuper

Posted
Posted

Been getting this error when starting my truck now: “please confirm password to continue using connected services”. What password would that be?  Doesn’t seem to take my WiFi or profile password. 

FCA85124-DDEA-4616-BD7B-01A25918D0D3.jpeg

wizard4878 Enthusiast

wizard4878

Posted
Posted

Mine did this last week,   if you tap inside the box, not on the X,  it will take you to a screen and ask you if your password is correct and then the message will disappear.  

I don't know why it happened,  I guess it had something to do with an update of some kind?‍♂️

ejdziurka Enthusiast

ejdziurka

Posted
Posted

Didn't GM give wifi access for the month of April?  Covid-19 related?  I'm guessing it's gone now, and this is why we are getting the message?  I've been getting it too, but I haven't done any recent update.

jgisonfire Enthusiast

jgisonfire

Posted
Posted

I was getting the same message, and It would not accept my password until today. 

 

I did login to the My Chevrolet website, which may, or may not have been related to finally getting it to work.

SuperDuper Enthusiast

SuperDuper

Posted
  • Author
Posted

Thanks for the replies everyone. I logged into mygmc website and I was promoted that my password was no longer valid, so had to reset password. Did a reset and the new password worked in the truck. All good now. 

  • 9 months later...
XY74 Enthusiast

XY74

Posted
Posted

Minor old thread resurrection.  

I get that message all the time, especially when a trailer is attached.  Goes to the towing screen and asks for a password.  I have never set a password for anything, nor did I get any phone apps or sign up with onstar.  (nor do I want to)  How do I make it stop?

  • 1 month later...
hmarv347 Enthusiast

hmarv347

Posted
Posted

I've tried every password I have and even reset my password for the MYGMC app and nothing works. Onstar even tried to update the software and failed to clear it. I've had this since March 2020 and its pretty annoying. Has anyone found other ways to clear it?

aliveguy5 Enthusiast

aliveguy5

Posted
Posted

Mine does this as well about once every 2 months... I put my password for the MyChevy App into it and it goes away. Not sure why it prompts all the time but that stops it for a couple of months. 

  • 3 months later...
NB_one Enthusiast

NB_one

Posted
Posted

I think it could be related to the WiFi Hotspot? Mine started doing it again yesterday. I tried to turn off in my.chevrolet.com but said it cannot connect to my truck at this time. Funny, it connected at first to download the hotspot name and password. 

  • 7 months later...
  • 1 month later...
Robg87 New Member

Robg87

Posted
Posted

Am about ready to drive my new truck through the dealers front window. Very distracting when pulling a travel trailer, the navigator screen flips to password required. Have to take my eyes of the road to go back to navigator screen. Every darn 15 minutes on a 12 hour trip. CRAP

TA^Guy Enthusiast

TA^Guy

Posted
Posted
On 5/8/2022 at 9:57 PM, Robg87 said:

Am about ready to drive my new truck through the dealers front window. Very distracting when pulling a travel trailer, the navigator screen flips to password required. Have to take my eyes of the road to go back to navigator screen. Every darn 15 minutes on a 12 hour trip. CRAP

 

I have this same problem.  I've tried everything password I can think I would have used and none work.  So while I'm driving down the road with a 30', 7000lbs in tow they want me to enter a password?  Maybe next time I'll call and wait on the phone for them to help me while I'm driving.

 

  • 1 month later...
Adam Richesin New Member

Adam Richesin

Posted
Posted

Thought I'd share in case it might help others. Like other posts, I've had this message popping up and I've tried known & working GM/Chevy passwords and PINs, but they wouldn't take. I should have noticed this, but the password prompt pops up when using my wife's User/Profile. So for those that swear they're using the correct password (and have multiple users), make sure you're under the right profile in Users.

  • 8 months later...
styers4 New Member

styers4

Posted
Posted

This happens for my spouse who uses profile 2. He has never set any passwords. Should he set one for this to stop? No help from the dealer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
    • SoCal Angler
      Parking Brake - Automatic Engagement Questions

      By SoCal Angler · Posted

      2023 GMC 3500 HD, SLE, 6.6L Gas, 4x4, 6 Spd Options:  SLE Convenience Package; Driver Alert Package 1; Spray on Bedliner; X31 Off Road Package; TRAILERING MIRRORS, HEATED POWER -ADJUSTABLE, AUTO DIMMING, WITH TURN INDICATORS WHEELHOUSE LINERS, REAR INC. REAR AXLE - 3.73 RATIO INC. GVWR, 11,350 LBS. (5148 KG) INC. FRONT AND REAR PARK ASSIST, INC. ULTRASONIC     I have been launching my new boat and noticed some things related to the parking brake.. I usually set the parking brake (habit) when on flat ground for typical driving.    When backed down on the launch ramp to launch the boat and I place gear selector into Park, the parking brake activates automatically. My second nature is to set parking brake manually and noticed I was turing the parking brake off.  The parking brake appears to be setting itself automatically.   I looked all over my owner's manual and only found references to being on an incline and manually setting parking brake, or at times parking brake will be auto engaged, but nothing specific to my situation.    When is the parking brake automatically engaged?  Under what specific circumstances?  Can the auto set parameters be changed?     I like the auto set feature.  It would be nice if always engaged when shifted into Park and released when shifted out of Park (like my wifes 2025 RAV4).   Thanks!    
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      www.enginelabs.com/news/what-i-learned-today-bearing-clearances-vs-oil-viscosities/     www.enginelabs.com/news/oil-viscosity-can-the-numbers-be-misleading/ The Big Lie… Coming full circle to the reason Lake discusses the Porsche engines in particular. Based on the 2000 samples in the SPEEDiagnostix database, increasing the oil viscosity in these engines, even those run on the track, showed no significant difference in results.   The smoking gun was in the oil chemistry. That is where the data shows higher instances of more wear. Molybdenum was the key; the higher the amount, the less the wear. Speed postulates that higher viscosity oils have more thickeners to artificially inflate their viscosity numbers. These thickeners lose viscosity under shear, and the result is that not all oils of the same viscosity have the same shear stability.   Having enough viscosity is the most important characteristic, but according to Speed, once that required viscosity level is reached, additive chemistry matters more than additional viscosity. Speed also states, oil pressure problems on the racetrack aren’t a viscosity problem; it’s an oiling system problem. Running a thicker oil is just a band-aid for an underlying oiling system problem.
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Can it still be Assembled II?   Viscosity on the decline by various means. Heat on the rise making that worse. Engine RPM in the tank. Smaller motors with more boost trying to emulate an electric motor. Full torque, zero rpm. Then we will triple the OCI. Argh.    But wait....there is more. LSPI has pushed a shift from Ca to Mg and as that cost more PLUS the run to lower sulfur compounds the TBN is moving in the wrong direction for the increased OCI's demanded.    That not being enough to placate a demand for a parameter they can't measure the other sulfur bearing compounds are also under attack. That would be zinc and phosphorus sulfonate compounds. To some degree those are being replaced with boron esters and others, i.e. titanium ect. All of which have shorter service lives. And there there is the "Secrete Sauce" marketing for AW adds that 'Can't be detected by UOA's" but trust me because I (the blenders) never ever lie.    Spoiler alert; ALL additives are sacrificial! Smaller amounts of the old blended with less robust versions of the new do not equal longer service lives. So what are the blenders recommending? Wait for it.......   MOVING THE GOAL POSTS! OMG      Let's declare the long standing TAN/TBN crossover irrelevant and tell people that soot is a great 'graphite' based lubricant which can aid tribo films. Wait, what? Let's declare that the standards used for oxidation and nitration were to conservative and can be expanded. Let's tell them that because GDI fuel dilution, although being a VISCOSITY KILLER and an acid generator is actually okay because we have better base oils that limit viscosity failure limits. (Said knowing this is measured in fractions of a centipoise and in bases not commonly used in shelf oils)   Lying from the heart is not just the new normal but we have a public, a very young public, that is so ignorant of the facts and so sure of their "RESEARCH" into AI driven models base in regurgitated  instead of scientific research based unvarnished, peer reviewed FACTS that the incoming guard is loosing their grip on reality and the OEM's are tickled pink while the blends bend the knee.    You have an ever limited set of tools to work with. And sooner or later those will be taken from you as the API and the EPA strangle the last remaining fluids from the system. What you have left is your wits. If you care to use them.    At some point in the very near future it will not longer be possible to do "What is best for the machine", and be replaced with "The best you have access too". You WILL be rewarded with half the life and twice the cost. That isn't that hard to predict.         
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...