Jump to content

Keyless entry remote receiver


Recommended Posts

Posted

Hello, I have a 2001 GMC Sierra 2500HD, the keyless remote receiver seems to be going out on the truck because i notice it is very selective on when it wants to work, from what distance, and every other factor in general. I even replaced the battery in the original remote and have reprogrammed an identical remote to my truck and it still acts the same. I opened up the dash to find the keyless entry receiver and have the part number #15732806 yet trying to order a new one I come to have found out that it is discontinued and cannot find one online to replace it with. My question is, can I get another keyless entry receiver from say a 2005 or 2007 or 2003 or any other suv/truck from GM and plug it in and just re-program the remote to the receiver, or is there something else I can do to get a new receiver even though the part is discontinued, or basically what are my options?

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Because I couldn't find someone to do a root canal without anesthetic on me, I decided to replace the door pins on my sagging driver's door to fill my Sunday afternoon instead.   Nothing makes a vehicle feel more like such a huge pile of crap than a sagging driver's door, especially when it creaks/groans. Procedurally, it's not that hard of a fix. Practically, it is a learning curve and you really should have someone there to help position the door when it's unhinged. Caution: spouses may become unhinged if you don't clearly communicate expectations or start moving the door without announcing to line up holes, etc.   I'm happy to report the hinges are just fine, but the old pins were severely worn, and the bushings had basically broken they were so bad. New pins and new bushings have it opening/closing level with the striker. These are pretty janky doors/latches from the factory so we don't get a "pop/thud" open/close like with a Mercedes. More of a clacky/latchy sound with a jiggly door handle. But it's as-new, good as it's going to get.   One more item checked off the list. The passenger door "could" use a new set of pins. 50/50 on whether I do it or not as it's fairly involved. At the very least I'll wait a week because I was down on my hands/knees and I'll need to wait a few days to recover from that!
    • I think the answer is it's a stock 5.7 Hemi with a 3.0L blower bolted onto it 😉   Practically, because a blower introduces a lot of high pressure, severe thermal stress, and extreme mechanical loads on an engine. Things still need a little time to seat and get used to moving under load.   Sarcastically, because it's a Stellantis/ 5.7 Hemi and those things need all the help they can get!!
    • It's been a little over three weeks since my second knee replacement.  I can now walk around the house without a walker or cane but still have a lot of healing ahead.  This morning I was able to bring a cup of coffee to my wife in bed.  A few days ago, this coffee would have ended up on the kitchen floor!  Knee replacement surgery is very common and will typically enhance the recipient's future quality of life. However, the recovery process can present significant challenges, pain and discomfort. I encourage anyone facing a recommended total knee replacement to welcome the opportunity.  Just be aware that your body may take several months to fully welcome the new parts! 
    • The Germans basically didn't make the list. There aren't a lot of shade-tree mechanics who work on them in general. At some point the economic equation of keeping a car alive favors junking it. Anecdote/experience tells me this is the case versus actual bad engines/engineering. Not that there isn't any, but there are definitely notable excellent examples. The 2.0 diesels will go forever and ever if one keeps the car around it running. The 2.0 gas cars eventually wear out their turbos but the block below it is usually still solid as a rock. BMW inline 6's same thing. Mercedes diesels of yesteryear, not uncommon to see 250k out of those engines, easy.     Link to the synopsis of the study: https://www.iseecars.com/longest-lasting-cars-study
    • 0w20 is recommended in the Sequoia. 0w16 in the Highlander Hybrid.   I think you make a compelling case for both the quality and frequency of maintenance but I wouldn't go so far as to plot a linear relationship between longevity and oil weight 😉   The list is interesting and leaves me with some questions. The Silverado 1500 is 12.9% likely while the GMC Sierra 1500 is only 10.8% likely. Arguably, they're the same truck, so other factors must be influencing the outcome.   The Honda Odyssey ranks #12 at 13% likely. Great. Rest assured we'll never stop hearing about the dang thing LOL.   There's a bit of a spread between the 4Runner (32.9%) and Tacoma (25.3%). Both overlap on the same 4.0 for many years although the Tacoma used a 3.5 for the last 10-12ish. I wonder if that's related to use-case or if it's suggesting the 3.5 isn't quite as up to the task, or maybe something else fails mechanically.   Ram at 3.5% overall likely, but the Ram 3500 holds the top spot on the Heavy Duty Models at 39.7%. One might say the Cummins is a ringer and provides an unfair advantage. I don't think it's fair/accurate to pit the GM Fullsize 1500's in a list with HD's which are basically medium-duty wearing a 3500 badge.   The Tahoe and Suburban hold spots #15 and #8, respectively, on the longest lasting SUV's list. What's the difference? One's got a shorter butt, unless they're also counting the 2500/3500 Suburbans in those numbers.   The GMC Canyon gets a 1.4% increase over its twin brother Colorado. Why, because it's prettier?   SO many questions...
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...