Jump to content

Recommended Posts

Posted

Having a hard time finding any information on this. We are in the middle of some record-setting cold, and upon startup the message “Heater Performance Mode Active” popped up on my screen. Can anyone tell me what this does?

Posted

I've never seen this and it's been pretty consistent 5-10F here lately.  Maybe because I am remote starting?  That said, a quick Google search says it's an elevated idle to help the drivetrain warm up a bit faster

Posted
17 minutes ago, 2020SilveradoCC said:

Having a hard time finding any information on this. We are in the middle of some record-setting cold, and upon startup the message “Heater Performance Mode Active” popped up on my screen. Can anyone tell me what this does?

Do you have a duramax?

This is from the HD duramax supplement.  

 

Heater Performance Mode (8-Cylinder Pickup Models Only) When cold weather conditions are detected, the transmission raises part throttle upshift points after the 1 (First) to 2 (Second) upshift to increase engine speed. This feature shortens engine and cab warm up times. When the transmission is in this mode, upshifts may be delayed. This is normal and does not indicate an operational problem

Posted

Just yesterday I was looking for a good ignition power source and saw somewhere in the fuse box documentation something referring to an electric supplemental heating device. I thought that seemed rather weird, then I just found this in the upfitter manual, maybe it has something to do with this? Looks like our trucks (at least some of them) have an electric heating element to help warm up the cabin faster when the engine is cold.

 

Electric Auxiliary Heater (C32)
Some models are equipped with an auxiliary electric
heater to assist in warming the passenger compartment
when the engine coolant has not sufficiently warmed to
operating temperature. The heater is a 12 V positive
temperature coefficient heating element located in the
HVAC case just downstream of the traditional heater
core. The HVAC control module will activate it when the
outside temperature is less than approximately 8°C
(46°F), the engine coolant temperature is less than
approximately 75°C (167°F), and the temperature blend
door is commanded to the full hot position.

Posted
1 hour ago, calgator73 said:

Do you have a duramax?

This is from the HD duramax supplement.  

 

Heater Performance Mode (8-Cylinder Pickup Models Only) When cold weather conditions are detected, the transmission raises part throttle upshift points after the 1 (First) to 2 (Second) upshift to increase engine speed. This feature shortens engine and cab warm up times. When the transmission is in this mode, upshifts may be delayed. This is normal and does not indicate an operational problem

That's the weird thing - I dont. I have the 2.7T.

Posted (edited)

 

 

Initial Drive Information

 

Transmission

 

Cold Operation (8-Cylinder Pickup Models Only)

When temperatures are very cold, the transmission will prevent certain operations to protect against damage. The information below shows shift range availability based on transmission oil temperature:
. All shift ranges available at −25 °C (−13 °F) or above.
. 2 (Second) and 3 (Third) shift ranges only at −35 °C (−31 °F) to −25 °C (−13 °F).
. 2 (Second) shift range only at −35 °C (−31 °F) or lower.

 

Torque converter clutch operation will also be prevented when air or transmission oil temperatures are below certain levels.
For areas where ambient temperatures are below −40 °C (−40 °F), use synthetic transmission fluid approved to Allison
Transmission specification TES-295. See Recommended Fluids and Lubricants 0 126 and Automatic
Transmission Fluid 0 95.

 

Adaptive Shift Controls (8-Cylinder Pickup Models Only)
The shift quality of a new vehicle may not be ideal because the Adaptive Shift Control process may not have determined the best settings for a particular shift or condition. Shift quality will improve with continued driving.

 

Low Traction Mode (All Models)
Low Traction Mode aids in vehicle acceleration on slippery road surfaces such as ice or snow. By selecting 2 (Second) using Range
Selection Mode while at a stop, the transmission will limit torque to the drive wheels to prevent slippage.
Chevrolet/GMC Duramax Diesel Supplement (GMNA-Localizing-U.S./Canada11354421) - 2018 - CRC - 10/10/17 

 

 

Heater Performance Mode (8-Cylinder Pickup Models Only)

When cold weather conditions are detected, the transmission raises part throttle upshift points after the 1 (First) to 2 (Second) upshift to increase engine speed.

This feature shortens engine and cab warm up times.

When the transmission is in this mode, upshifts may be delayed.
This is normal and does not indicate an operational problem.

 

 

Four-Wheel Drive (8-Cylinder Pickup Models Only)
When operating in 4 n (Four-Wheel-Drive Low), there is a very deep gear reduction.

The resulting shifts will feel exaggerated

 

 

 

imo, Kinda makes sense that the same Heater Performance logic would apply to the 2.7L T.

Edited by redwngr
Posted

My 3.0 showed this message this morning at -5F. I figured it was related to the high idle setting I enabled in the settings.

Posted (edited)

I started my truck this morning @ -24°F and didn't see the message, I have the 5.3 with 8spd - I don't warm it up in the morning start wait 1~2min then drive.

Edited by Moend
  • 2 weeks later...
Posted

I got this message in my 2019 2.7T last week when it was -25 where I was in Iowa. 

  • 11 months later...
Posted

I also have the 2.7T and asked at the dealership about this. I was told it activates the defrost mode when using the remote start in extremely cold weather, to assist in not having the windshield fog up when entering the vehicle.

  • 10 months later...
  • 1 month later...
Posted

I get this message when its cold, the problem i have is that it seems to lower or cut out the heater in cab, but only when its really cold out 10 degrees or colder it seems.   is that normal ?

Posted (edited)

I had this a few times last year/get this message if I do not put the truck (2.7T) in my garage on very cold nights. It seems to operate just how the 8 cyl description says. Just raises the shift points some for a short time. 

Edited by jashaw

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I had skimmed through that article when you posted the link and honestly I felt rather defeated in a sense and realized that all these years in changing oil that in fact putting in what I was told was a good quality oil was probably not filtered as well as it should be although the filter put on the engine would be what ( as long as it never went into bypass mode ) would be the final filtering of the new oil that the engine components would first see, but then the filtering media itself is not up to par to what is ideal because a full flow filter would be too restrictive to filter fine enough for the engines best outcome in the long run. Only one of our tractors over the years which was a Versatile with a 855 Cummins had a separate bypass filter, some engine manufacturers did spec a partial bypass system within the main oil filter but I don't believe any other trucks or equipment I was servicing used such a filter. No doubt a product like the Amsoil bypass system is of benefit as long as nothing goes sideways with the extra plumbing and filter such as a rupture/leak that could cause the oil to pump out of the engine ( yes that Versatile had a remote canister with hoses routed to it as well ). With the idiot egr system on a diesel and as a result forcing a lot more soot into the oil, that certainly isn't helping the diesel engines cause or as you pointed out the GDI engine issue with creating more soot and aside from having a fancy secondary filtering system, changing the oil more often helping lower the total soot load.     So oil manufacturing and the end product is not something one can control and I wonder if there are specs on what various oil packaging companies produce in particle count or size. As to the filtering, if the OEM is not designing a filter size and spec that is really what it could be, they too are short changing the end user and so what is the answer. Of course as you say the oil side can only do so much if the air side isn't keeping up its end of the picture and air filters are only so efficient and if in a dusty environment such as farm or construction or driving gravel roads there is a lot of dirt to filter out and some of that ends up into the air stream.    Of course the irony in places like where I am where they dump the salt on the highways but also will mix in some calcium or outright pure calcium for problem road area's, or using calcium as dust control on gravel roads, the vehicle that gets used in that environment may rust out before a properly engineered engine and maintenance finally wears out so one has to face that reality in the rust belt. 
    • Has anyone run these on their 2500?
    • have you stuck with dealer oil changes since then? I made the same switch after getting tired of crawling around under the truck, but I’ve found some dealers are way better than others about getting you in quickly. Curious if yours has been good about scheduling or if you’ve had to look elsewhere for quicker turnaround.
    • Thank you.   I am set on a 3.0 Duramax as my previous truck with a Ford Ecoboost had just as many, if not more, "common" issues.  Cam phasers, timing chain issues, 10-speed valve body and CDF drum, emissions issues, etc.  So I figured, why not get 2x the fuel mileage (these things got 27+mpg on every mixed city/highway test drive I put them through) and better towing capability with resale value to boot?   My minimum, shortest trip will be 50 miles 1-way and I regularly go out of state with a travel trailer.  I'm planning on using this for a marketing/event promotion business also, which would require regular towing of trailers for bands, DJs, sound and lighting gear, along with my personal camera gear for filming events.   Looked at other trucks in the $30k+ price range but the issues seem to be everywhere, plus too many with gaudy mods.  I'm literally sticking with RWD trucks because they tend to be actually used as trucks, vs. the 4x4 models I've seen with unsafe lifts, huge tires, and general mods that would affect reliability (I'm wondering if some of them were tuned, hence the aggressive throttle response and hard shifting).   So my goal is to find a stock, 3.0 with 1 or 2 owners, in good physical condition, and decently well maintained.  Can't seem to find that up here, everything in the $27-30k range has had multiple owners, smoke smell, issues, or body damage.  Or the ridiculously modified trucks with 80k miles for under $27k but lots of problems...
    • That’s pretty tough Grumpy. I reread the previous few posts. They all reference oil changes. Much like your last thread. In my humble opinion it keeps things interesting.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...