Jump to content

Recommended Posts

Posted (edited)

I thought you were going to say the craziest priced item was a Yukon XL Denali.

 

I bought a house with a 3 car garage in 2008 for what they ask for those boats now.

Edited by aseibel
  • Like 1
  • Thanks 1
  • Haha 1
Posted

nitrogen in tires.....markup is 1000%....not a huge ticket item but markup has to be the highest, 

 

 

  • Like 2
Posted

Dealers selling tires. I asked their prices for grins. In my town within a 5 mile radius. There’s 3 discount tires, Firestone, Sams, and a Walmart. Car dealership can’t get close.


Sent from my iPhone using Tapatalk

Posted

I worked in auto parts, and often supplied the dealerships near me. I'd make a weekly run to do inevitable checks and replenishment at dealers. I have a good idea what the actual cost of parts are versus what the markup is. I'll give you a clue. There's no way in hell your going to be able to buy the parts as cheaply as the dealer is. On top of that, the dealer marks up the part 70% gross so they can bet 40% profit. Most parts retail businesses will mark the product 30%-40% to make a sufficient profit. Imo, "stealership" is the correct term.

 

As an example, look at the GM Performance CAI. It's made by K&N. The difference is, GM has a tune with theirs that makes it 50 state compliant. GM says the air filter needs to be replaced every 20k miles. K&N says their filter will last 1 million miles with proper care and cleaning. Cost for the filter alone with K&N is $59.99. I found it on Rock Auto for $46.79 by using GM part 84428120 (also cross reference to AC Delco A5000C). Cost of the filter through a dealership is $117.87 (list price, which they love to charge). Anything smell funny to you on this one?

 

Link for Rock Auto listing: https://www.rockauto.com/en/parts/acdelco,A5000C,vapor+canister+filter,5000

 

 

Sent from my SM-N960U using Tapatalk

 

 

 

 

 

 

  • 2 weeks later...
Posted
On 4/14/2021 at 12:02 PM, 2020SilveradoCC said:

We run a business, too. We aren’t stupid. However, $55 for an air filter is robbery. I get that GM controls the price. And charging that much for labor on a two minute install is laughable. Didn’t mean for it to be taken so personal, just wanted a quick laugh at an extremely high priced item for a two min install. 

 

GM does pay for warranty work.. at least according to my dealership, they do.

 

You still don't get it.  The dealership has a labor rate, which they are probably charging 1/2-hour for this replacement.  But that covers the cost of the service rep who sells the repair, the guy who drives your truck into the shop, the service tech who makes the repair.  It also covers that cost of that paper and plastic they put on the seat and floor.  All this is in addition to maintaining a profit and keeping the lights on.

You have the ability to do it yourself (as do I), but a lot of people don't, won't, or wouldn't know where to start.

Imagine going to a restaurant and buying a cheese burger for $14 when you can make one at home for about $3 - $4.

 

 

  • Like 1
Posted

I was replacing my broken water pump (2018, 45k miles mind you...seems early for a failed baring, but you know, the factory parts are top notch 😏). Anyway, getting one of the bolts out, it broke off. In the housing. Tried drilling and taping, but that made a mess. So I needed a new housing. Not something they carry at Autozone or Napa.

Online: $176, 7d delivery at best. 

Local Chevy dealer: $400 + tax

Its a Sat, and my truck is not going to run without water....so...

Price I am willing to pay: "lots"

 

I am *not* glad the dealer wanted $400, but they were open on a Sat, paying the salary of a parts counter guy. They had the part, and probably thousands of other specialty parts for my truck in the back ready to go. I got a free bottle of water, and nice hello from the receptionist, a friendly reminder that it would have been covered by my extended warrantee if I had not attempted the work myself; And, a nice new C8 to sit in while I waited for him to dig it up from the back.

I get that it feels like a rip off, but given that it got my truck back up and running faster than mail order would have, with above average knowledge and service compared to my local Autozone, its a price I accept as part of capitalism. 

 

They wanted $100 the other day to change my cabin filter. I passed on helping them out that much with their profit margin.    

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...