Jump to content

OBDII Scanner

UrbanRage

By UrbanRage
in Troubleshooting & Recalls

 Share

Recommended Posts

UrbanRage Enthusiast

UrbanRage

Posted
Posted

 I do apologize if this isn't the correct place to ask this question. I'm in the market for a good OBDII scanner that would meet the typical DYI'er's needs. I've been reading about them online and, honestly, it can get a little overwhelming. I'd like to keep the cost under $200, any recommendations?

Jamazon New Member

Jamazon

Posted
Posted

I use a Foxwell NT510 elite for GM and it has quite a lot of functions.  I use for my Silverado and Saturn.  I like it and it was  under $200.  I hope you find a scanner that works for you!!

mikeyk101 Senior Enthusiast

mikeyk101

Posted
Posted (edited)

I went cheap and got a Bluetooth one. It will read and give you the codes and also allow you to clear them. It is linked to my android phone using the app Torque Pro by Ian Hawkins. The Torque Pro I believe is a paid app but there is a free Torque Lite available as well. I bought it several years ago and it has served its purpose. The Torque Pro also allows you to monitor different functions as well.

 

Bafx Products - For Android Only - Wireless Bluetooth Obd2 Scanner Diagnostic Code Reader & Scan Tool - Scan, Reset & Clear Car Check Engine Light https://smile.amazon.com/dp/B005NLQAHS/ref=cm_sw_r_apan_glt_fabc_A2SX332AHWEHSJHQ0SDB?_encoding=UTF8&psc=1

Edited by mikeyk101
CrawlSlow Enthusiast

CrawlSlow

Posted
Posted

Depend on your needs. To best recommend a device, what are you looking to perform? 

 

1. Something basic such as read and clear common code.

2. Able to perform more functions such as abs, brake bleed. Note alot of the basic reader does not have this function.

3. Access GM modules/program modules

 

All depends on what you want to achieve.  I have a $20 dollar code reader and it perform just as well as my $90 Bluedriver. Around $120, I can do things I wish I knew before purchasing the Bluedriver, it turns Bluedriver into a dust collector. 

  • Like 1
MikeBMW Senior Enthusiast

MikeBMW

Posted
Posted
2 hours ago, CrawlSlow said:

3. Access GM modules/program modules

To do that, one will need a scanner that is more than $200.
I have an Autel MaxiSys - I like to work on cars.
I, also, have an Autosync with BTDiesel which unlocks the BCM and HMI for programming.
Also, a SuperChips F5 for unlocking the ECM.
If one just wants to read codes, and get resulting information, there are many.
If one wants to reprogram modules and dig in deeper, it's gonna cost a lot.

  • Like 2
UrbanRage Enthusiast

UrbanRage

Posted
  • Author
Posted
14 hours ago, CrawlSlow said:

Depend on your needs. To best recommend a device, what are you looking to perform? 

 

1. Something basic such as read and clear common code.

2. Able to perform more functions such as abs, brake bleed. Note alot of the basic reader does not have this function.

3. Access GM modules/program modules

 

All depends on what you want to achieve.  I have a $20 dollar code reader and it perform just as well as my $90 Bluedriver. Around $120, I can do things I wish I knew before purchasing the Bluedriver, it turns Bluedriver into a dust collector. 

This is something that I have been thinking about. I'm the type of person that would like to have it and not need it, than to need it and not have it. I'd like to be able to read codes on multiple different vehicles. I'd also like to be able to access the GM modules that are in my truck.

 

- I've been looking at the Foxwell NT614. 

 

Thoughts? 

  • Like 1
CrawlSlow Enthusiast

CrawlSlow

Posted
Posted

That looks good for most DIY at home.

 

I have the vcx nano for GM. It already paid for itself after one use. I bought my truck used with only 1 set of key yet the truck shows 2 set of keys being active. I used it to deactivated all key/fob, cut my own keys and reprogram 3 set of key/fob. Just imagine how much the stealership would charge just to cut and program. I have also use it to program other modules thru ACDelco SPS services, an additional $40 access for 2 years. 

  • Like 2
CrawlSlow Enthusiast

CrawlSlow

Posted
Posted

For something quick/on the go/portable, I uses the $20 scanner along with torque pro. It's hook up to my spare phone which is linked to my truck via Android Auto. I can scan for codes on my truck's 8 inch screen.

 

I started a thread in the mod section if you're interested. 

pokismoki Senior Enthusiast

pokismoki

Posted
Posted (edited)

torque pro is ok, but if i found the pids  and other parameters where incorrect, and would give erroneous data.

 just get the HPtuners obd module, you can thank me later

Edited by pokismoki
  • Like 1
Kevin N. New Member

Kevin N.

Posted
Posted (edited)

It all depends on what you want.
i. If you want a cheap scanner
ii. Bluetooth scanner
iii. live data and more features that you want.
Then you want to check out these models, Blue Driver Bluetooth Professional OBDII, Scan Tool 426101 OBD Link MX Bluetooth, BAFX Products Bluetooth Diagnostic OBDII Reader. https://theeffectiveguide.com/best-obd2-scanner/best-obdii-bluetooth-scanner-reviews/bluedriver-obd2-reviews/
I hope you find that scanner that you want

Edited by Kevin N.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • pyoung62
      2026 DENALI 6.2L

      By pyoung62 · Posted

      I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • ShowMeShooter1332
      Can you add a 360° Cameras hard button to a 2021 Sierra?

      By ShowMeShooter1332 · Posted

      I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Grumpy Bear
      Winter Returned

      By Grumpy Bear · Posted

      Looks like the entire state is burning. 😬
    • Chuck FB
      Oil Consumption

      By Chuck FB · Posted

      Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • CPhelps
      4 Wheel Drive System

      By CPhelps · Posted

      Cool to see another Vermonter!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...