Jump to content

Recommended Posts

Posted

Went to the dealership expecting to grab a new grille for $400-$500. Instead found out that the grille is $1800CAD and there is no stock or ETA from the manufacturer as it is on back order.

2.jpg

Posted

I slammed on the brakes and grill took majority of the impact. I saw the deer go up 10-12ft and land in the ditch. I was expecting my front end to be smashed as well. Guess I got lucky and thank god the air bags didn't go off, as that would've cost more.

 

 

Posted

I would say part being made is going towards producing new trucks to get inventory back up. Parts are pretty much tough to get for anything still. If that is all the damage you got I'd say you did good.

  • Like 1
Posted

Damn, sure it wasn’t a cat. I had a 61 super 88 tank back in the day look worse than that after a deer strike. My only time.

  • Haha 1
Posted
1 hour ago, 2016 Sierra Owner said:

I would say part being made is going towards producing new trucks to get inventory back up. Parts are pretty much tough to get for anything still. If that is all the damage you got I'd say you did good.

 

Yea that's what I figured. The dealership said I'd be looking at 2-4 months for the grille. He said if it was 4-5 weeks it would show in the inventory.

 

I called most of the GM dealers in Canada, and the ones who had this grille on hand, they were holding it for the body shops.

 

I tried to see if I could get the elevation or vader chrome grille off the Denali Ultimate lol. Same issue.

 

 

43 minutes ago, KARNUT said:

Damn, sure it wasn’t a cat. I had a 61 super 88 tank back in the day look worse than that after a deer strike. My only time.

 

It was a fully grown deer, and I was doing about 110km/h (~65mph). It was about one second when I applied the brakes and hit the deer. So I had slowed down to maybe 60kmph. And I hit its ass end, as it was mostly off the road. But it still managed to get airborne and land in the ditch.

  • Like 2
Posted (edited)

My 2008 Benz C350 didn't fare as well as yours.. and it was a baby deer while I was going 90 km/h. $4,500 in repairs. it sucked because the car was only two or three weeks old.

Edited by Wiggums
Posted
On 10/22/2022 at 5:00 PM, GM90 said:

Went to the dealership expecting to grab a new grille for $400-$500. Instead found out that the grille is $1800CAD and there is no stock or ETA from the manufacturer as it is on back order.

2.jpg

Yeah those days ended back in the 1990's, i don't think there are many parts on the front end under a grand or two except maybe the bolts and emblem.

Posted
On 10/25/2022 at 1:35 PM, GM90 said:

 

Yea that's what I figured. The dealership said I'd be looking at 2-4 months for the grille. He said if it was 4-5 weeks it would show in the inventory.

 

I called most of the GM dealers in Canada, and the ones who had this grille on hand, they were holding it for the body shops.

 

I tried to see if I could get the elevation or vader chrome grille off the Denali Ultimate lol. Same issue.

 

 

 

It was a fully grown deer, and I was doing about 110km/h (~65mph). It was about one second when I applied the brakes and hit the deer. So I had slowed down to maybe 60kmph. And I hit its ass end, as it was mostly off the road. But it still managed to get airborne and land in the ditch.

 

Poor truck. But did you pick up the road kill... That's wasted venison.

Posted (edited)

Man, you got lucky that it was just the grill. If it was me, I would have the whole front end smashed in given my luck

Edited by 20Denali22
Posted (edited)
1 hour ago, RedLT said:

 

Poor truck. But did you pick up the road kill... That's wasted venison.

IDK about the Lone Star State, but in many localities you're required to contact the game dept. or state patrol whom will see that the venison is donated often times ending up in county lockup kitchens. Since an accident report is needed for an insurance claim, the state patrol (or in the case of the OP the RCMP?) would be the logical choice.

Edited by garagerog

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • It really is comical when people don’t agree or see the reason some people prefer the older vehicles. They become condescending. All the while they may be busting their knuckles on old vehicles. I have found memories of swapping out engines in my old GM cars in a weekend without much hassle. Unlike today. One wrong move a computer will shut you down. Even on something as easy as a brake job. There’s a pretty comical YouTuber called the car wizard. A garage owner who puts it all in perspective. Another Vicegrip garage that’s shows just how tough the old stuff is. 
    • I was around and remember that era very well, so I'm calling b/s on that statement. If they were that bad no police department or taxi company would've bought a single one ... but they were used in both services (and fire) for DECADES. They were bulletproof and proven. Even the early 21st century ones weren't too bad! The early models were legendary.   Mine is proof, but people like atlas are blinded by agenda and refuse to believe facts right before their very eyes.   Even decades after they were built, a new generation started driving them, posting all their builds and shenanigans on Grandmarq.net and Crownvic.net. The failures would show up then, since they all were deep past 100k-150k miles by that point, and younger drivers tend to be a little aggressive, especially with vehicles than can lay a one-tire fire for as long as you hold your foot in it. They've more than proven themselves over the decades.   The only thing that'll really take them out is road salt. The bodies and sheet metal were garbage. A victim of the cheapout FoMoCo and GM have been partaking in before then, and since.   Today it's the stuff that counts - the undercarriage that rots away first!    GMs Caprice was no slouch either. Reliable as a stone ax - the opposite of what they build now.    
    • Let me know how your vehicles do in 10 years. You don't know ******, kid. 😂    There's a reason that Panther platform was used as police, fire, and taxi service for DECADES ... long before you were born, apparently.
    • If your connector also has a big lever to get the connector on and off, you don't want to force the lever either way, as it becomes a bigger problem if you bust the lever or the mechanism it works.
    • It's just useful to disconnect the battery to prevent odd shorting out when unplugging/plugging stuff together.  I also  touch the two cable ends together (after disonnecting) to drain the small amount of stored battery energy in various modules.   I believe the main system where you need to be more concerned with, so you need to do the above and then wait some time, iss when you are working on the air bag system, to prevent inadvertent firing of the air bags.   The in-cab switches are just that, plain switches, it's generally not a problem to swap them in/out.  For my '12, I'll get an error message on the dash if I power up the truck w them unplugged, but that's it (power up= turn the ignition on).   The ITBC located above the spare tire is a computer that manages the trailer brake system.  That is probably more important to have the battery disconnected.  It does have to be programmed to the truck, either before or after it's installed, for it to work.  For my '12, I had a very hard time reinstalling the main connector to it (IDK if yours is the same or not), it turned out the silicon seal was jamming up, preventing it from going on all the way.  I finally got it fully installed by lubing the seal with a bit of dielectric grease, then it slid on and latched in place easily.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...