Jump to content

Recommended Posts

Posted

Currently investigating a new to me truck. I haven’t been in the market for one for a few years. Last time I looked short beds everywhere and long beds few and far between. Over the last couple of weeks I’ve discovered nothing has changed.

 

I must be weird to want a long bed truck. I don’t often need a truck bed, but every time I do a long bed is a must for whatever I manage to get myself into.

 

I’ve looked at the short beds on the lots and just can’t imagine myself with one. I’ve owned them all short, long and stepside.

 

So as this journey progresses over the next couple/few months I hope to find a CC long bed.

 

Am I weird? (rhetorical, go ahead and make fun, It’s ok I know I am off kilter a few degrees)

Posted

Nothing like a longbed, especially when you need to use the bed!

  • Like 1
Posted

Pass on the long bed for me.  If I need to haul something that won't fit in the bed, I probably need to use a trailer.  How much does a long bed add to the wheelbase and to the turning radius, 12-14 inches?

Posted (edited)

Same with me, I spent a couple months looking for a long bed to pull my fifth wheel.  Found a 2020 2500HD LTZ Crew 8’ bed. Worth the extra time looking. It is a little hard to park in some lots.. especially our Home Depot! You would think they would make their parking lots big enough for trucks!

317EA2A5-FFFA-46A7-9980-73E01A348E46.jpeg

Edited by Lennon Starkweather
  • Thanks 1
Posted

I have never owned a crew cab before. So maybe there is something I don’t know about having a long bed behind that.

 

I don’t have to worry about fitting in a garage. Can’t get a vehicle in there anyway. Tiny house so the garage is a big walk in closet/pantry/etc.

 

I have found a perfectly (almost) optioned truck in my area. But it’s black and I just started looking. After 10 days of looking I may have to compromise on color. I’m fine with that with the exception being red. Can’t do that one. Had enough of that color in sunny Idaho. Summers are hot and black would be hotter. And a real pain in upkeep.

 

I am hoping and a wishing that with new models hitting the lots over the next few months that the number of trade ins goes up.

 

 

Posted

My son has a long bed CC. It's a nightmare in parking lots. When I bought mine, I wanted a long bed because the short bed was too short when hauling lumber. My last one was an extended cab. I decided to go with a long bed std cab. The inside the cab storage sucks, A Swing Case helped that. Overall I'm very happy with it.

  • Like 1
Posted

I can see parking lots being a pain. A lot of them are striped for smaller vehicles. Even my local Lowe's.

 

I've had too many loads that were made easier with a long bed. Oddball, random stuff for family usually. Had a load of pallets last week for my FIL. Done in one trip vs. two.

Posted (edited)

My crew short bed fits in my garage and I hate walking out of o a cold iced up snow covered truck in the morning. The GM short bed is still pretty long at just under 7’ though. 
The long bed would be nice when I’m hauling 8’ material though having it easily fit with the tailgate closed

 

this is 8’ and 10’ material just the other day. Not bad for a short bed. 
 

how much weight would you guys be comfortable with leaning against the closed tailgate? I never like to. Seems these tailgates have enough issues 

30909088-045D-48DA-B4A6-ACBAC2D3EA3E.jpeg

Edited by Pryme
  • Like 2
Posted
1 hour ago, Pryme said:

My crew short bed fits in my garage and I hate walking out of o a cold iced up snow covered truck in the morning. The GM short bed is still pretty long at just under 7’ though. 
The long bed would be nice when I’m hauling 8’ material though having it easily fit with the tailgate closed

 

this is 8’ and 10’ material just the other day. Not bad for a short bed. 
 

how much weight would you guys be comfortable with leaning against the closed tailgate? I never like to. Seems these tailgates have enough issues 

30909088-045D-48DA-B4A6-ACBAC2D3EA3E.jpeg

Yep, the bed on my crew cab standard bed holds lumber or plywood with the tailgate down just fine.

 

In regards to parking, Lowes lot here, if I don't nose into the spot in front of me, the ass end is well out into the lane.  I end up basically taking two spots.  I usually park out in no man's land in parking lots anyway, so not really a huge deal.

  • Like 2
Posted

I agree @Another JR I hauled a big cabover camper with the 94 truck in my avatar for years. Some of the places I went are off limits with my TT now. 

Posted
On 4/14/2023 at 7:14 AM, Pryme said:

how much weight would you guys be comfortable with leaning against the closed tailgate? I never like to. Seems these tailgates have enough issues 

 

Using supports like these I have personally had about 1000# on my tailgate.
91tILZz-wyL._AC_SX466_.jpg

 

So, the latch mechanism in the tailgate and the latch bolt on the bed is plenty strong for anything you choose to lean against it.

Now, whether or not it will malfunction and open on it's own is another matter entirely.

  • Like 1
Posted
48 minutes ago, Dr1ft3r said:

 

Using supports like these I have personally had about 1000# on my tailgate.
91tILZz-wyL._AC_SX466_.jpg

 

So, the latch mechanism in the tailgate and the latch bolt on the bed is plenty strong for anything you choose to lean against it.

Now, whether or not it will malfunction and open on it's own is another matter entirely.

No I meant with the tailgate in the closed position and leaning wood against it while transporting it in the bed. I always am Leary about leaning too much on the closed tailgate 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Paid $2.72 for E85 today.
    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...