Jump to content

Recommended Posts

Posted

All I run is E85. It didnt require anything special tuning wise.

Ryan

Why E85?

Performance and cost. Been running it 100% for over 3 yrs now

 

 

Ryan

Posted

You're also supporting American farmers and not people who want to kill us. I wish I could run it, but the mods dictate otherwise. Something about superchargers and detonation and boom.

Posted

Performance and cost. Been running it 100% for over 3 yrs now

 

 

Ryan

Did you compare 93 octane to E85?

Posted

Performance and cost. Been running it 100% for over 3 yrs now

Ryan

Did you compare 93 octane to E85?

How so? Nothing substantiated with numbers

 

 

Ryan

Posted

I have never tried E85. I read that it get less mpg so I only run 93. Just wondering why you are only using it? Thanks

Posted

Yea I get less MPG but I basically break even with the cost difference/milage loss.

Posted

Which is weird because every time that I've run E85 vs premium I always loose out big money spent, wise. I loose 3-4 mpg on ethanol It would take over a $1.00 difference in price to break even and ethanol is rarely more than .$60 a gallon cheaper than premium here. Not to mention, there is only one pump in my area and 0 up north where I usually travel.

Posted

I figured about 75 cents/gallon was needed for me to break even and as of late it has been around that in the Jackson area. Ann Arbor has an even bigger cost advantage but I'm not out there too often and I'm not driving 80 miles round trip for gas. :lol:

Posted

At the station by my house that has it, E85 is 3.13 where 93 is or was 3.79. I remember reading somewhere about a guy tunning his 6.2 on E85 and was maintaining his mileage in the mid 16's. (but cant remember who or which forum i read it on)

So if you were to tune specifically for it and pull down mid 16's it would easily be worth it. Everyone that runs it seems to love how their truck perform with it.

Plus comparing it to 87 there isnt much of a cost difference but compaing it to 93 there is a pretty substantial difference.

Posted

Just to throw my math out here.......

 

15,000 miles last year driven.

 

Averaged 14 mpg over that mileage on premium.

 

15,000 / 14 = 1,072 gallons of fuel (I rounded up).

 

Premium here averaged $4 a gallon last year.

 

1,072 gallons at $4 a gallon would cost $4,288

 

Averaged 11 mpg on E-85

 

15,000 / 11 = 1,364 gallons of ethanol.

 

Ethanol averaged $3.40 a gallon here last year.

 

1,364 gallons at $3.40 a gallon would cost $4,637.60.

 

$4,637.60 / 1072 = $4.33 a gallon.

 

So, premium, would have to be $4.33 a gallon, with ethanol staying at $3.40 a gallon, for me to break even. I've never seen premium take a significate spike in price without ethanol following it, in my area. Premium is currently $4 a gallon here. Ethanol is currently $3.35.

 

I'll continue to run premium.

Posted

E85 has been runnin 2.50 - 2.90 here the last month. Makes me :)

 

 

Ryan

Posted

Lowest I have paid has been $2.29. I have 4 stations all within about 5 miles here

  • 3 weeks later...
Posted

Has anyone put a programmer on the 6.2? If so which one and how do you like it? Extra HP extra mileage?

Posted

I'll be tuning mine with BlackBear... Just breaking it in a bit first. I got em to do a tune for my 07 Vmax and it was quite beastly after.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I have changed oil and filter for years by starting a cold engine to warm oil up, let it run 5-10 minutes depending on temperature. Drain until it starts dripping, refill with quantity from owners manual or get it close.   
    • I changed the factory fill oil in the rear diff of my truck for the first time today and the miles is close to 9000 on the truck. There was a lot of fines on the magnet, a very thick layer but working it through my fingers it all felt like mush and as most know it appears like graphite, so no surprise chunks anyway. Certainly was time to do it from my thinking and could have been done sooner but the oil didn't look awful but sure wasn't new looking and never expected it to either. I did use some solvent to help me clean out the bottom area of the axle housing, just get any other stuff settled at the bottom washed and wiped out of the housing for the bit of effort it takes. I used Amsoil Severe Gear 75W90 in the easy packs to try out what they are like and I used up 4 packs and didn't spill much at all in the process but did take all four of the packs and go to the work bench and emptied them into a measuring container and there certainly was some in them that added up to something, then poured that into one of the easy packs and squirted in what I could get out of it. I would say the level is within 1/8th of an inch of being level with the threads at the fill plug so just the perfect amount. Once again, more than what GM says the fill volume is but computes with what others are adding to their rear diffs as well. 
    • So speaking of oil consumption with my L8T as I just changed the oil yesterday and made the switch over to Amsoil SS 0W-40 from the Mobil 1  5W-30 Truck and SUV I just dropped out. 2900 miles on that oil as well as  68 hours on that oil ( so used to equipment with an hour meter and that becomes valuable information to compare with others as well ). Once again the oil use was so very little, I am going to say it dropped under 1/16 of an inch on the dipstick. No towing was done and this interval was from early spring until now.    One interesting item to note is that going by the 5 quart jugs I was using before from Mobil, it was showing that I was putting in 8 US quarts to bring it to full if not slightly over the full mark according to their jug markings. Granted I did allow more drain time this time and in part because the engine oil was only lukewarm as I started it and let it idle and not for long enough to get the oil itself hot ( the engine was up to operating temp ). The oil in that state just seemed to take forever for it to drip out but not only at the drain plug but at the oil filter housing as well, perhaps I had never quite gotten all the oil out before and I could have still waited longer but as it was I waited well over 3 hours. I think next time if I have the time I will do an experiment by dropping the oil and lets say leave the pan under it for 15 minutes, then switch to another pail and let it drip out overnight and measure how much more oil comes out. So this time and yes I ended up getting it just over the full mark as I was experimenting with trying to get the level to the add mark after I had run it and then waited some and then added a bit and waited for a certain amount of time for it to settle to the add mark. I very well may not have waited long enough for that experiment but I got to the add mark, then dumped in a full quart and waited some and checked and then waited some more and it crept up more ... and then finally oops, it was slightly over full some hours later when it really had settled all it would. I find this engine sure takes time for the last bit of oil that gets poured in to finally make its way into the crank case. I can only guess at how much too much I added as per maybe a 1/10th of a quart. I had poured in 8.5 quarts going by the quart containers as per 8 quarts and 16 us ounces. I was shocked at how much this was off compared to the prior oil changes and if those larger jugs and they are not marked accurately enough or they contain slightly more than what they say, or the drain time factor made that much of a difference. But I know on this forum there have been others who have said they have put well over 8 quarts in their L8T and now I have also going by the Amsoil true quart containers. Its a confusing convoluted mess up here in Canada with some oil manufactures packaging is in true US quarts, some is also in true US quarts containers on an even number of quarts but also marked in liters which becomes the odd ball volume of a fractional amount of liters. Then there is the Liters only containers, no US markings as its a true metric container and only measured in Liters to an even number of Liters. But remember we used to have Imperial Gallons and Imperial quarts as well !. 
    • Holy smokes. Clearly not a deal on that truck. I just mean in general, matte or painted trim is becoming more normative than chrome, but I know the Black Optics packages on various vehicles are being sold as uplevel trims. They look really good, but sheesh. It's just paint and plastic.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...