Jump to content

Recommended Posts

Posted

I just bought a 2005 1500hd with quadrasteer about a month ago. Reading other forums I was under the impression that ever 15,000 miles I should take that in to get looked at, adjusted, whatever...

 

Exactly what needs to be done with it? I contacted my local GM dealership and they have only worked on 1 before...should I be concerned with this?

 

approx how much should this cost...

Posted (edited)

I looked at one last year. My reading led me to understand that the QS diff fluid should be changed every 15k miles, and that's it. The fluid is special, however, and using the wrong stuff will cause problems (chattering). There's a special GM fluid, but I recall some folks having made their own using aftermarket + friction modifier in the right ratios. Unfortunately, there aren't that many QS trucks/burbs around, but I recall http://www.denalitrucks.com/ having more folks with them.

Edited by music
Posted (edited)

I've worked on literally, hundreds of Quadrasteer trucks.

 

Yes, every 15k the diff fluid should be changed. I have only ever used the GM fluid but from what I've seen it is just a GL-5 gear oil with friction modifiers in it.

 

The only other adjustment is setting the rear toe which should be done during any wheel alignment.

 

Oh and btw, if the rear steering gear does go out (and most always do sooner or later) there is not a replacement made for them anymore.

Edited by ChevyTech77
Posted

Set the rear wheels straight and power it down. That's it. The rear wheels will stay straight as long as you don't hit something with them sideways, like bumping a curb. I've heard of some guys just pulling the rear steering axle right out of the truck and swapping a standard axle into it's place, as well.

Posted

That is surprising considering you can get parts long after a model stops being made. I'm guessing this supplier went belly up? Probably the same thing with the supplier of the retractable roof on those Envoys. I heard that venture killed the company.

  • 5 months later...
Posted (edited)

Rear steering gear......

 

I was just looking at buying a '03 Denali or a Silverado with quadrasteer, so if I can find one of these gears I guess I should buy it for back-up, what was the cost???

 

I find it strange that they stopped parts availability for a vehicle only 7 years old (based on the '05 Quadrasteer). '05 was the last year for that system correct??

Edited by 11c
Posted
Rear steering gear......

 

I was just looking at buying a '03 Denali or a Silverado with quadrasteer, so if I can find one of these gears I guess I should buy it for back-up, what was the cost???

 

I find it strange that they stopped parts availability for a vehicle only 7 years old (based on the '05 Quadrasteer). '05 was the last year for that system correct??

 

Believe what you will but yes, there is no parts availability, from GM anyhow.

 

2005 was the last year, correct.

Posted

I thought there was a federal law about maintaining parts for 10 yrs? Old wives tail?

Posted

No laws but that is generally what manufacturers do anyhow. In this case, I believe the supplier went under so that is why there are no parts.

 

 

Sent from my iPhone using Tapatalk

Posted

Bummer, a co-worker has a Q-steer truck. He really likes it. Wants another. I guess it was just too costly and not enough sales?

Posted
I thought there was a federal law about maintaining parts for 10 yrs? Old wives tail?

 

I would assume so, yes.

 

No laws but that is generally what manufacturers do anyhow. In this case, I believe the supplier went under so that is why there are no parts.

 

 

Sent from my iPhone using Tapatalk

The supplier went into bankruptcy protection but never went under. The plant, and company, are still going to this day but were bought out and changed names.

 

Bummer, a co-worker has a Q-steer truck. He really likes it. Wants another. I guess it was just too costly and not enough sales?

 

Not enough sales, correct but in all honesty, I believe that was the marketing division of GM's fault not the supplier.

Posted

I almost bought an 04 Quadrasteer back in 06, but passed because I wasn't sure about problems it might have. Sounds like it wouldn't have been a bad truck to have unless you need new parts for the rear steering.

Posted

i too almost bought a quadrasteer but talked myself out of it because it seemed like one more thing that could go wrong

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...