Jump to content

Recommended Posts

Posted (edited)

Got the N-Fab light bar and Hella 500 Black Magic driving lights installed today. They aren't wired up yet, will have to wait for another day as I ran out of time.

 

20140816_181046_zpspvloidqm.jpg

Edited by surebuttercringe
  • Like 1
Posted

Hmmm, should I change the oil....its been 7 months......and 1,150 miles [emoji5]

If it's synthetic no harm in leaving it in there... I've only put 4k on my pickup since February, at this rate I'll only need to change my oil once a year.
Posted

Got the N-Fab light bar and Hella 500 Black Magic driving lights installed today. They aren't wired up yet, will have to wait for another day as I ran out of time.

 

20140816_181046_zpspvloidqm.jpg

They look nice, now I'm wanting to buy more lights :lol:
Posted

Put a third, and final coat of Chassis Saver on my frame. New fuel pump at the end of the month, and the bed will be going back on.

Posted

That is the best ending of all the hundreds of thousand of videos out there

Posted

Upgraded to penzoil Ultra Platinum(from regular platinum) and put on a Mobil 1 extended filter. NOW I'm good for a year.

Posted

Went to a car show. Was asked pulling in if I was a spectator (still has that show quality look).

 

Took a few pics of some cool trucks

 

5b63b6bd4b0f5886ec553a86fd4637ab.jpg

 

e65abbcb4a99ab7d9f8c4f64c4a82d6f.jpg

 

 

Ryan

Posted (edited)

Kinda like the mental picture of car seats strapped into something with a cage (and before someone mentions Jeeps, don't :lol: ).

Here ya go Mike:

 

7601904999279b32d544ae03edb24d46.jpg

 

 

Somehow one of the twins fell asleep in this thing that sounds like it has open header.

Edited by SnakeEyes
  • Like 1
Posted (edited)

Jeez that's gotta be a pain to get them in there!

Edited by MikeNH
Posted (edited)

Jeez that's gotta be a pain to get them in there!

Got it down to five minutes. Still a hassle though.

 

1. Unbolt the belts

2. Slide the seat forward

3. Tilt the seat forward

4. Put the car seat in top first with base facing out

5. As soon at the base clears the doorframe turn seat upside down

6. Rotate seat counter clockwise, while starting with the top of seat going under the belt mount rollbar

7. Route belt through frame bars and buckle in

8. Bolt the front belts back

9. Make sure the padding is covering the belt mount bolt heads(moves around while installing the car seat)

Edited by SnakeEyes
  • Like 1
Posted

You ever read the "Will it Baby" car reviews on Jalopnik? One of the writers has a young son and he's used getting his seat into unique cars as a centerpiece of each review. They're pretty entertaining.

Posted

A few years ago (30) or so a friend of mine drove a Pro Stock Vega, and one night at the races the guy who owned the car got into a panic when they could not find his 4 year old son!!! The last time anyone saw the boy was when they were cooling the car down after a pass and when they went to make another pass is when they could not find him, and it was his favorite thing about being at the races was going to the line. When the driver got back to the pits no one was around the trailer so he hopped out and threw his helmet into the back of the car and he heard the boy say "hey don't be mean" he about had a fit when he realized that the boy was back there when he went 8.00 at 160 mph with no helmet, seat belt or fire suit on!!! The owner of the car had to bribe the boy not to tell his mom about the car ride that he went on and did not remember!!!

:jester:

  • Like 1
Posted

Tasted trans fluid today against my will. Stupid tcase adapter seal is leaking and I took the skid plate off to see where all the fluids coming from and there was a puddle on it that of course fell on my face

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...