Jump to content

Recommended Posts

Posted
21 hours ago, RyanbabZ71 said:

Vapor Canister Purge Valve

 

3rd time I have changed it.  Last time was a year ago.  For some reason when it gets cold outside this thing goes bad?

Could this make the tighten gas cap message appear? 

Posted

Yes I have had that error message on my 2010.  

Posted
On 11/6/2017 at 6:08 PM, RyanbabZ71 said:

Vapor Canister Purge Valve

 

3rd time I have changed it.  Last time was a year ago.  For some reason when it gets cold outside this thing goes bad?

Designed by the same guy that did the dash?

  • Like 1
Posted (edited)
5 hours ago, 8lugmafia said:

Could this make the tighten gas cap message appear? 

I suppose anything is possible. This valve allows vapor from the canister to enter the engine - when it sticks open, it makes the engine run pig rich, and runs like crap, especially at idle, until the vapor is cleared out. Can also cause a vacuum leak, which causes the opposite problem (lean), with similar running.  Sticking closed will throw a light, since it won't be able to purge the canister when commanded to.

 

Usually a vent valve failure will trigger the gas cap light. If the tank can't hold vacuum during the computer's test, that message will appear, and also flag a code in the ECM.

Edited by Jsdirt
Posted
14 hours ago, Jsdirt said:

I suppose anything is possible. This valve allows vapor from the canister to enter the engine - when it sticks open, it makes the engine run pig rich, and runs like crap, especially at idle, until the vapor is cleared out. Can also cause a vacuum leak, which causes the opposite problem (lean), with similar running.  Sticking closed will throw a light, since it won't be able to purge the canister when commanded to.

 

Usually a vent valve failure will trigger the gas cap light. If the tank can't hold vacuum during the computer's test, that message will appear, and also flag a code in the ECM.

I just remember someone saying something about a purge valve causing that message to appear. Maybe a different one

Posted

Besides my daily ritual of driving to/from work, drove out to Stater Bros in Mojave for a few things, came home, put the perishables away, and went out and tuned my CB antenna.  Didn't quite get the measurements I was looking/hoping for, but at least now I'm less likely to fry my radio while transmitting.

Posted
On 10/23/2017 at 10:21 AM, Coby7 said:

This morning I repaired a pair of 08 Uplander FOBs and one 08 Cobalt. Then refurbished an 03 Silverado cluster and LEDed it in cool white.

 

mq6dppP.jpg

Coby-  If you are around, whats going on?  Also- you are needed on the snowblower forum website :)   Thanks. 

Posted

Over the weekend, I drove up to the Big Bear area and home again, out on Friday and home on Sunday.  Cleaned out the truck to make room for a couple that went with us.  Only had a small bit of traffic when I was going from I-215 SB to SR-210 EB, on the loop.  Way home was smooth all the way home.  Now to wash/vacuum the truck one these mornings.

Posted
21 hours ago, Daly said:

 4 months and 10k kms. I think thats a record for me.

20171113_060312_resized.jpg

ouch, I'm at 3 years and 18k

Posted

Meh, it's meant to be driven. I mean I didn't buy it to look at it.

  • Like 2
Posted (edited)

I'm at 10 years, and 91,326. :D 

 

I want to have my barn addition and lift installed before anything else breaks on this thing. The less I drive it, the better. Currently has a rejected sticker on it, because the damn monitors won't run (might be time to change the T-stat). 

 

Drove it for the first time in 2 months this past weekend. Last tank of gas I got for the thing was on October 12th ... and it still has over 1/4 tank! Had to grab a huge storage shelf my brother gave me - wasn't fitting that in the Volvo.  

 

Truck felt like a built hot rod compared to the anemic 114 CRANK HP the Volvo puts out.  :lol: 

 

Old pic of the Volvo engine - I would never let a car hit the roadway with PINK zip ties ... on the damn plug wires! Awful.  Took this pic the day I got the car home, almost 3 years ago.

Volvo 940, '93 B230F engine (2).JPG

fullsizeoutput_966.jpeg

Silverado, oil catch can install (2).JPG

Edited by Jsdirt
Posted
4 hours ago, Daly said:

Meh, it's meant to be driven. I mean I didn't buy it to look at it.

Many on here end up looking at theirs quiet a bit with all the issues they are having!  At least they are pretty. 

  • Like 1
Posted

Went to Lowes and bought some stain/sealer and screws to finish rebuilding my deck.  Also cleaned all the crap out of my bed that was in there from hauling the old lumber from said bed.

 

Want to put a tailgate light bar on the back of my truck so spent some time looking at that.  Think I'm gonna go with this: Redline Triple LED Sequential Tailgate Bar.  Not sure if I want to go amber or red turn signals yet.  I'm leaning amber but think it might look strange with the red tail light signals.

 

Found a cool truck on here I want to mimic the front end of.

Posted
9 hours ago, Western96 said:

  Not sure if I want to go amber or red turn signals yet.  I'm leaning amber but think it might look strange with the red tail light signals.

 

Your choice but amber turn signals are for Euro and Rice boxes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,774
    Total Members
    8,960
    Most Online
    lanaderay
    Newest Member
    lanaderay
    Joined
  • Who's Online   4 Members, 0 Anonymous, 1,532 Guests (See full list)


  • Latest Articles

  • Posts

    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...