Jump to content

Recommended Posts

Posted

Matches the truck nicely. :cheers:

 

Great concept, those 2-seaters. My wife would just continuously punch me in the ribs, so I opted for the single seat. :lol:

Haha well I still get the shots to the ribs, back of my arms pinched....she'll let me know when I'm doing something she doesn't like, which is more often than not lol. She loves going riding, but she's not the most confident behind the wheel. I've got a dirtbike too so I can still ride that as she's getting used to this

  • 2 weeks later...
Posted

My new Honda Pioneer 700-4. Not many miles on it so far but I think it will be around for a very long time.

post-127628-0-03438100-1444065662_thumb.jpg

post-127628-0-03438100-1444065662_thumb.jpg

post-127628-0-03438100-1444065662_thumb.jpg

post-127628-0-03438100-1444065662_thumb.jpg

  • 1 month later...
Posted (edited)
Has a full fold out windshield now.




ATVGURUFrontBrushGaurd001800x600.jpg

ATVGURUFrontBrushGaurd003800x600.jpg

Edited by Arkyrider
  • 3 weeks later...
Posted (edited)

My Gator XUV 825i. Cab heater. 72" blade.

 

post-122677-0-57941500-1450549947_thumb.jpg

post-122677-0-57941500-1450549947_thumb.jpg

post-122677-0-57941500-1450549947_thumb.jpg

post-122677-0-57941500-1450549947_thumb.jpg

Edited by Cowpie
Posted (edited)

Finally got some snow to fully check out the blade on my 825i. Worked great! I have about 600' of gravel drive and it cleaned everything off with no gravel displacement and I could roll on up into grass areas with no scalping. Let the wife take a few passes to get familiar with it and she loved it. Anyone wanting to stick a plow on a ATV/UTV and don't want to take out a mortgage to do so, this is the cat's meow. I can have the complete blade and mount off or back on in 15 seconds if I want to remove it. No hydraulics, no winch, etc. Blade angles for some fast throwing snow to the side either way. Gets the job done is a fraction of the time it took with my tractor/loader and a rear blade. Not a bad deal for a 72" blade, new, for under $1K.

 

http://www.agricover.com/snowsport/atv/

Edited by Cowpie
Posted

Got a 2005 Yamaha 350 raptor.

 

Mods done to it:

 

DG performance O-series exhaust

Pro-armor Nerf bars

Fly racing handlebars

Piaa extreme white headlights

Gytr jet kit

Fairly used ITP hole shot tires

And much more.

 

Believe it or not this bike beat a water cooled Yamaha yfz 450. But it was all luck only because he ran out of gas. But I don't wanna get to cocky. 8c2e92baabc3de6749f8b1785aa5a79f.jpg9ea84e6c656bcf287352d8d26a53b811.jpg3bc8c41d546cb5337200d2d8c49311f6.jpga03d1c8cc42e0fe3a651df5094537377.jpg222549ca803875092f8a94211aee2110.jpgb71543a044c3a4264ebf9a62f2092781.jpgd5ef6c4d5391f2ee3bdc54403a0c35fb.jpg2a49c38b193034a9cc5a8ceeddc6add3.jpg

 

 

 

 

Sent from my HTC Desire 626s using Tapatalk

Posted

I loved my Raptors. I want to get back into one when funds allow. I was tempted to trade my Arctic Cat for one but I love having the plow for snow season and 4x4 for towing the boat around when needed or a small trailer for firewood etc. I guess sometime being able to have both is my best choice :D

  • 2 weeks later...
Posted (edited)

Its been a few months since I've posted anything on this site. Here's my current quad, a 2006 Yamaha Grizzly 660

post-129158-0-15908300-1452339686.jpg

post-129158-0-67372600-1452339696.jpg

post-129158-0-98847400-1452339786_thumb.jpg

post-129158-0-15908300-1452339686.jpg

post-129158-0-67372600-1452339696.jpg

post-129158-0-98847400-1452339786_thumb.jpg

post-129158-0-15908300-1452339686.jpg

post-129158-0-67372600-1452339696.jpg

post-129158-0-98847400-1452339786_thumb.jpg

post-129158-0-15908300-1452339686.jpg

post-129158-0-67372600-1452339696.jpg

post-129158-0-98847400-1452339786_thumb.jpg

Edited by greg74
Posted

554945b1be1d7839a494aaf1e1197b21.jpg3fc353dacaa6b3b72894be9fe71f7083.jpg50919f9f7856e2e0a8d2e74415d1d3aa.jpga6071757eaa141276423a0e33e020447.jpg

Here are a few pics of mine. The Grizzlys are 2013 700s and the Ranger is a 2015 900.

 

Sent from my SM-N910V using Tapatalk

Posted

Just finished a rad relocate kit on my 1000, gonna be ordering new tires soon and also installing a heavy duty front bumper. Also need to finish up my steering upgrades

 

7964fae913f4a38755a88218480b9172.jpg

  • Like 1
Posted

Just finished a rad relocate kit on my 1000, gonna be ordering new tires soon and also installing a heavy duty front bumper. Also need to finish up my steering upgrades

 

7964fae913f4a38755a88218480b9172.jpg

I've been thinking about going to have a look at the outlander 570....any thoughts??

 

Sent from my Note 4

Posted

I've been thinking about going to have a look at the outlander 570....any thoughts??

 

Sent from my Note 4

My gf was looking at a 570 but settled for a renegade 500 because she got a killer deal on it. Haven't really heard much about the 570's honestly. I'm sure the smaller engine makes driveline parts last longer haha. As far as the build quality of a can-am I'm very happy with mine. Rides amazing, lots of low end, just an overall good bike. I understand a 1000 is not for everyone. That's a whole lot of power on tap and I only got mine cause I got it for a steal. But I love this bike, obviously has a few flaws just like any other bike but I really like the quality and fit and finish of the can am bikes so far. Plus I believe them to be the best looking utility bikes out there. I'd say go for it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,889
    Total Members
    8,960
    Most Online
    smandy
    Newest Member
    smandy
    Joined
  • Who's Online   5 Members, 0 Anonymous, 547 Guests (See full list)


  • Latest Articles

  • Posts

    • Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...