2014+ Suspension Lifts

CountryBoyzZ71 · January 22, 2016

Thank you.

Txjose · January 22, 2016

Thing looks friggenn sick man!!!

Sent from my Note 4 on Tapashit

Nova6883 · January 23, 2016

I have a 2015 silverado and have a RC 2.5" level kit, running a 305/55/R20 on factory wheels. Wanting to put a 1.5" body lift on top of that, to make a total of 4" of lift. With factory wheels, can I run a 35x12.5 tire?

teaman · January 23, 2016

Finally someone got this lift please upload pics I'm dying to see it!!

Sent from my E6853 using Tapatalk

zoomiejr2 · January 23, 2016

Sick! Looks high in front you gonna add a leaf?

Sent from my E6853 using Tapatalk

zoomiejr2 · January 23, 2016

Also what's your wheel and tire setup, any rubbing?

Sent from my E6853 using Tapatalk

Swankster988 · January 23, 2016

I received everything I have been waiting for! 6.5" Zone Lift, Fuel Mavericks and Toyo Open Country AT II's. It gets installed on Monday! I also ordered the add a leaf from Zone, is it necessary? I have a 200lb ARE truck cap/topper being installed next week. I just want to make sure the truck sits level. Would you guys install it? Is it necessary?

TX_AT · January 23, 2016

New to the Forum, but here's my 2014 Sierra All Terrain Z71, 13" total of lift, 10" Suspension and 3" Body on 38x13.5x20 stock rims.

Mods so far: Volant Cold Air Intake, Throttle body spacer, BullyDog programmer, and for exhaust I cut the 3rd cat and factory muffler out and installed a Flowmaster 44 series muffler in the factory location with a 90* turn down right out the back of the muffler.

Still have the stock 3.08 gears but with taxes I'm installing 4.10s F&R.

I still tow my 29' toy hauler with 2 RZRs in it.

All RC Suspension Lift and Powder Coated Blue.

Let me know what y'all think.

Thanks Zack

Looking Good!!! I currently have a 6" BDS lift & been thinking of adding a 3" body kift to my AT. Can you post some pics of the bed gaps and most importantly the hitch. Again, good lookin truck

CountryBoyzZ71 · January 23, 2016

You should be able to, I ran 35x12.5x20 on just a leveling kit and had no rubbing and didn't trim anything

I have a 2015 silverado and have a RC 2.5" level kit, running a 305/55/R20 on factory wheels. Wanting to put a 1.5" body lift on top of that, to make a total of 4" of lift. With factory wheels, can I run a 35x12.5 tire?

Suspension · January 23, 2016

.

Edited January 24, 2016 by Suspension

Nova6883 · January 23, 2016

.

Edited January 23, 2016 by Nova6883

Nova6883 · January 23, 2016

You should be able to, I ran 35x12.5x20 on just a leveling kit and had no rubbing and didn't trim anything

What kind of tires did you have? Because my current tires, 305/55R20, rub the sway bar a full lock right now

crafferty · January 23, 2016

New to the Forum, but here's my 2014 Sierra All Terrain Z71, 13" total of lift, 10" Suspension and 3" Body on 38x13.5x20 stock rims.

Mods so far: Volant Cold Air Intake, Throttle body spacer, BullyDog programmer, and for exhaust I cut the 3rd cat and factory muffler out and installed a Flowmaster 44 series muffler in the factory location with a 90* turn down right out the back of the muffler.

Still have the stock 3.08 gears but with taxes I'm installing 4.10s F&R.

I still tow my 29' toy hauler with 2 RZRs in it.

All RC Suspension Lift and Powder Coated Blue.

Let me know what y'all think.

Thanks Zack

Truck looks great! Just a friendly FYI you may want to remove the throttle body spacer as they add no benefit on modern engines.

I received everything I have been waiting for! 6.5" Zone Lift, Fuel Mavericks and Toyo Open Country AT II's. It gets installed on Monday! I also ordered the add a leaf from Zone, is it necessary? I have a 200lb ARE truck cap/topper being installed next week. I just want to make sure the truck sits level. Would you guys install it? Is it necessary?

I'd install the add a leaf.

Sent from my SM-G900P using Tapatalk

CountryBoyzZ71 · January 23, 2016

Looking Good!!! I currently have a 6" BDS lift & been thinking of adding a 3" body kift to my AT. Can you post some pics of the bed gaps and most importantly the hitch. Again, good lookin truck

Yeah I'll get you some pics in a spell, just got to get them on the computer to load on here. And Thank you

What kind of tires did you have? Because my current tires, 305/55R20, rub the sway bar a full lock right now

35x12.50x20 Federal Couragia M/T

Truck looks great! Just a friendly FYI you may want to remove the throttle body spacer as they add no benefit on modern engines.

I'd install the add a leaf.

Sent from my SM-G900P using Tapatalk

Thanks and I'll leave it bc it cant hurt it.

Edited January 23, 2016 by CountryBoyzZ71

teaman · January 23, 2016

Sick! Looks high in front you gonna add a leaf?

Sent from my E6853 using Tapatalk

The driveway is slanted. When it stops raining here (sometime in May), I'll take some better pics. I'm not adding a leaf...completely happy with the stance and I barely fit in the 7' parking garage at work now. I'm running 35x1250R-20/10 Open Country R/T's on 20x9 (6" backspacing) Predator II's. I was hearing some popping in the front end the last couple of days...took it back to the shop to have everything re-torqued and all is good now. The turning radius is the only downside, but worth it in my opinion. Once you have a truck, you want a lift. Once you have a lift, you want a bigger lift.