2014+ Suspension Lifts

[Bigrich]

Quarter inch spacers aren’t to bad? Would that be for the front & rear wheels? As long as I can use the factory wheels & run 35’s and keep it some what tucked in. Fender flares help with the look also. This build takes some research 

[Bigrich]

4 inch fabtech uniball or knuckle lift? 4 inch lift with 35’s would be an nice set up! Not to high so I can still park in the garage!

[Bigrich]

Thank for the reply. Quarter inch spacers just in the front?

[Bigrich]

Anyone running rough country lift on late model gm’s? They offer a 5 & 6 inch kit for the same price $1299.00

[CentennialDriver]

4in BDS lift, factory centennial 22s, 35in nitto grapplers 

[Bigrich]

That looks awesome! That maybe all I need is 4 inch lift. Any spacers needed use the factory wheels? Ride quality? Stabilatrac issues?

[FHLH]

On 4/1/2018 at 8:27 AM, FlipZ71 said:

I've been told by several shops that the fab tech is good quality kit.  

 I went with the zone 4.5 zone..  And added a leaf in rear. 

I kinda wish I went higher....   

Gonna go up a notch on Bilsteins.....  Soon after all settles......   

 

Truck looks great. if you had to guess, just how far out did the Zone push the front track? I really don't want to push the front track wider, but I don't want an RC bracket lift either.

Also, Who did the lift? Yourself or a shop in the Houston Area?

 

[FlipZ71]

It pushed out inch& half.  

I had a local shop.  Cutten Customs install.  

Using a 4 inch block in rear and adding a leaf really helps this truck a lot.  

[FlipZ71]

[Bigrich]

Nice to hear none of you guys having stabilatrac issues.?? That is the one thing holding me back from installing a 6 inch lift. That and I want to use my 20 inch Denali wheels wrapped with 35 KO2’s!!

[Bigrich]

37 minutes ago, FlipZ71 said:

It pushed out inch& half.  

I had a local shop.  Cutten Customs install.  

Using a 4 inch block in rear and adding a leaf really helps this truck a lot.  

Wouldn’t think you would need anything in the rear? 

[FHLH]

2 hours ago, FlipZ71 said:

looks fine to me! What wheel and offset? I'd probably change from a 0 offset to a +18 - +24 if I go with a Zone. Cutten Customs has been around for a couple decades, they do great work work. Also, one of the few authorized Zone dealers in our area from what I understand. Thanks again for the info.

[FHLH]

1 hour ago, Bigrich said:

Nice to hear none of you guys having stabilatrac issues.?? That is the one thing holding me back from installing a 6 inch lift. That and I want to use my 20 inch Denali wheels wrapped with 35 KO2’s!!

Zone/BDS and Pro-Comp are all compatible with Stabiltrac. I'm sure there are others, but those are what I know off the top of my noggin.

[FlipZ71]

Yup no problems.  Truck drives and performs great.  Gonna get a good test in few weeks..   Going to Moab ?

 

Wheels are 20X10 but a -12... Running a 34 inch X 11....  So I stick out little further than I want.  I already had the custom rock stars before the lift. 

[FlipZ71]

1 hour ago, Bigrich said:

Wouldn’t think you would need anything in the rear? 

These newer trucks only have 3 leaf springs in rear.  They squat easy with little load and ir towing.  The extra leaf helps a lot.