Jump to content

Recommended Posts

Posted

Guys

 

I’ve read every single post in this thread, but I’m simply confused on what I need to do for my truck. I have a bone stock 2018 Sierra 1500 Denali Ultimate 4wd (22” wheels). I’m simply trying to raise the front of my truck up to level with the rear. I plan to keep the same stock wheels and tires. Can someone tell me what I need to get?

 

Thanks for the help. I’m not knowledgeable about vehicles and I need some help deciphering all the info I’ve been reading.

 

 

Sent from my iPhone using Tapatalk

 

a42764225ab0a937139cef24caaceacf.jpg

Posted
14 hours ago, heels0303 said:

Guys

 

I’ve read every single post in this thread, but I’m simply confused on what I need to do for my truck. I have a bone stock 2018 Sierra 1500 Denali Ultimate 4wd (22” wheels). I’m simply trying to raise the front of my truck up to level with the rear. I plan to keep the same stock wheels and tires. Can someone tell me what I need to get?

 

Thanks for the help. I’m not knowledgeable about vehicles and I need some help deciphering all the info I’ve been reading.

 

 

Sent from my iPhone using Tapatalk

 

a42764225ab0a937139cef24caaceacf.jpg

there are kits that level the front and supposedly don't cause any issues. 2" is about max you can go. The issue beyond that starts with the upper ball joint. From what I understand, is that it is not secured in the upper control arm very well. when the angles put on it from leveling, the chances of it popping out greatly increase. Hence the reason for new control arms with a better ball joint cup design. The new upper control arms are generally a different shape, and that is where the issues come from with larger tires and rubbing.  However, there have been reports of stock tires rubbing on stock control arms as well.

 

If all you want to do is level it slightly, I would just get a 2" kit with a Magneride adapter, and be done with it.

  • Like 1
Posted

Just finished installing the Rough Country billet aluminum 2in leveling kit

 

Before and after

 

473B49A3-9B54-4737-84B6-B6DA985688FE.thumb.jpeg.8a84b147dfda625c0a399002c34199b8.jpeg6787772A-0DF2-432F-89E6-E39EED388684.thumb.jpeg.86f967c980cb6355f9f39c85a8c9b377.jpeg

 

  • Like 2
  • 2 weeks later...
Posted
On 12/29/2018 at 3:41 PM, texas9011 said:

Just finished installing the Rough Country billet aluminum 2in leveling kit

 

Before and after

 

473B49A3-9B54-4737-84B6-B6DA985688FE.thumb.jpeg.8a84b147dfda625c0a399002c34199b8.jpeg6787772A-0DF2-432F-89E6-E39EED388684.thumb.jpeg.86f967c980cb6355f9f39c85a8c9b377.jpeg

 

Looks good, any rubbing issues?

Posted (edited)

@ All Terrain

 

No rubbing issue at all.   the only thing I don't like is the upper ball joint angle.  I am going to keep an eye on it and if I start to see wear, I will likely go with the readylift upper control arms.

Before/After pics of Upper Ball joint.

 

balljoint.thumb.png.8397ef60bcf12de4091a7d2c709b73d3.png

Edited by texas9011
added pic
Posted

Hey guys. I have a 2015 z71 offroad and want to level as high as possible and run as big and fat of tire i can on stock 20 inch wheels. I also want to put fender flare on, hence the fat tire. Can anyone tell me if i can run a 33x12.5x20 tire with just leveling or would that require a lift, which i don't really want to do. I've tried the different websites and things just get more co fusing.

  • 2 weeks later...
Posted
On ‎10‎/‎21‎/‎2018 at 8:46 PM, sierra91 said:

Not the best photo. Got new tires on this weekend. Went from 295/55R20 cooper stt pro to 295/60R20 Toyo MTs 

A041254E-EE95-43F8-BE6B-19EBFBC6660B.jpeg

id like to see a picture of the front and rear of this truck. Ive got a 3.25in level on mine with the knuckle and diff drop, and contemplating doing 35s or 295/60.

Posted
3 hours ago, bburnsed_12 said:

id like to see a picture of the front and rear of this truck. Ive got a 3.25in level on mine with the knuckle and diff drop, and contemplating doing 35s or 295/60.IMG-0750.thumb.JPG.e2e8b2ec92530ecdfa1d3d6d08de76f6.JPGIMG-0748.thumb.JPG.fb05db41f4f3f3ed209e49d794552ae1.JPG

 

Posted
3 hours ago, bburnsed_12 said:

id like to see a picture of the front and rear of this truck. Ive got a 3.25in level on mine with the knuckle and diff drop, and contemplating doing 35s or 295/60.

 

IMG-0746.JPG

Posted

 

3 hours ago, bburnsed_12 said:

id like to see a picture of the front and rear of this truck. Ive got a 3.25in level on mine with the knuckle and diff drop, and contemplating doing 35s or 295/60.

Sorry for some reason would not let me post all of those in one post. I am a huge fan of the wider tire look and these do not bother me only being 11.7 wide

Posted

I'm new to this site please don't light me up too much. I've got a 2018 cc, standard bed 4x4, all star edition so I've got the 20" wheels which i love. i want to level the truck and keep my stock wheels. my question is do i use the rough county 2" or go with bilstein 5100 on all four corners and front on the top setting? the truck is a daily driver and i farm on the side so it does get used some for what it is intended. what is going to be the best for me in the long run? i plan on keeping this truck for 10 years.

Posted (edited)

you wont want the Bils at the top setting, crappy ride.  My shop wants to do Bils @ 1.5 and a 1 inch spacer.  Or I may go 2.5" spacer and be cheap AF.  

 

 

Edited by big papa
add more
Posted
On 1/12/2019 at 7:14 PM, Rogerrob said:

Hey guys. I have a 2015 z71 offroad and want to level as high as possible and run as big and fat of tire i can on stock 20 inch wheels. I also want to put fender flare on, hence the fat tire. Can anyone tell me if i can run a 33x12.5x20 tire with just leveling or would that require a lift, which i don't really want to do. I've tried the different websites and things just get more co fusing.

I'm not an expert but here goes.   You have a 2015 so you likely have cast steel upper control arms (as opposed to stamped steel or aluminum)--that's good news.   I have a 2016 GMC regular cab with the cast steel control arms and did a Bilstein 5100 level (top setting both sides) on my truck which only gave me 1.6 inches on one side and 1.8 inches of lift on the other.  I have factory GMC 18 inch rims with +24mm offset and 8.5 inches width.  I then installed 33 x 12.5 x 18 Toyo MTs ("E" rated tire which is actually a full 12.7 inches wide per Toyo site) all the way around and have zero rubbing issues of any significance (had to zip tie passenger side in one spot).    I also have plenty of clearance on all suspension components, even at full articulation.  Like you, I read all the threads and still wasn't sure how the tires would fit.  I have 8,000 miles on the tires and everything as been perfect.  You want to use stock 20 inch rims which likely are 9 inches wide and have an offset from +27mm to +31mm.  I think the 33's would fit fine.  I would go to Discount tire and have them put one on and if it doesn't work, scrap the plan.  They have a policy of allowing returns if you are not happy for any reason--re-confirm this but I asked in AZ and this policy was in fact true.  Last thought, if you level higher than what I did, I don't know if the upper or lower control arms might be at a different angle and touch the tire--but I think you will be OK and just do the Discount tire testing.

Posted
5 hours ago, sonofab said:

I'm new to this site please don't light me up too much. I've got a 2018 cc, standard bed 4x4, all star edition so I've got the 20" wheels which i love. i want to level the truck and keep my stock wheels. my question is do i use the rough county 2" or go with bilstein 5100 on all four corners and front on the top setting? the truck is a daily driver and i farm on the side so it does get used some for what it is intended. what is going to be the best for me in the long run? i plan on keeping this truck for 10 years.

I have a 2016 GMC regular cab 2wd and hated the factory shocks.  I installed Bilstein 5100s all the way around and fronts on highest setting and love them.  I subsequently installed Toyo MTs (33 x 12.5 x 18) and love the setup.  If you want to handle dips and bumps on pavement or off-road as you described, the Bilsteins will be the best you can do for the money and they will also lift your front 1.5-2 inches on top setting (seems to vary).  I would go with top setting.  I like zero body roll (I corner hard) and the Bilsteins on the top setting have been perfect.  They handle certain bumps on the pavement way better than the stock shocks but on other types of bumps the stock shocks were better--so that is a wash.   However, these trucks really need 2 to 2.5 inches of lift in the front to be perfectly level.  If you are keeping your stock tire size though, the 1.5 inch top setting Bilstein lift is perfect for looks (the tire won't look too small in the front wheel well).  Also, Bilsteins alone minimize the concerns about ball joints and warranty denials.  See my writeups on all this in the forums.  Hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined
  • Who's Online   0 Members, 0 Anonymous, 580 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...