Jump to content

Recommended Posts

Posted
On 11/21/2017 at 11:24 AM, LFZ said:

Beautiful Truck...where do you buy those Volks?   

 

Would it be a sin to put Japanese wheels on an American truck made in Mexico?  

I bought them from my friend's shop. PM me if you are interested in buying them :)

Posted (edited)
16 minutes ago, Denali 101 said:

Not in here often enough - couple freshies:

 

24788371468_ea41c817ed_k.jpg

 

24788368738_745660bdd7_h.jpg

 

24788365588_4cbbd6a0a0_h.jpg

 

24788364478_a9a11c0e6a_h.jpg

look' s good - maybe a light tint to your lights - head /fog , light bar ??? But that's me

Edited by slj2008
Posted
On 11/25/2017 at 9:49 PM, moto28 said:

Picked up this new truck yesterday. Love it so far!

 

nFJRwoN.jpg

On coming drivers must love you, lifted and the nose high cali lean. You did adjust your headlights down right? Even stock headlights on stock trucks cause some annoyances, levelled you can really tell so with that set up I can only imagine. Sweet choice in wheels (nice to see a black wheel with some character), need to be a little smaller though.

 

Tyler

Posted

Picked this one up yesterday, '15 SLT. Only have pics from the lot right now but will get better ones later on when its cleaned up. 

side.jpg

  • Like 2
Posted

How she sits for now.  Added tinted windows today & Bak Revolver X2 tonneau cover a couple weeks ago.  Level kit & tires next?  Maybe exhaust?  Can't decide...

IMG_3345.jpg

Posted

b7e20fb234919fef94f8c7563003b62c.jpg

2017 LT DC Midnight. Exterior add ons include:
OEM Chevy mudguards, OEM Chevy rectangular running boards, AVS LOW profile wind deflectors, extang trifecta 2,
Xpel ultimate film.

  • Like 1
Posted
11 hours ago, Loco-diablo said:

b7e20fb234919fef94f8c7563003b62c.jpg

2017 LT DC Midnight. Exterior add ons include:
OEM Chevy mudguards, OEM Chevy rectangular running boards, AVS LOW profile wind deflectors, extang trifecta 2,
Xpel ultimate film.

Welcome - Good looking truck

Posted

 

Added a Ranch Hand grille guard to the '15 z71 the other day. Really like it - it's stout. 

DPLCAIlUQAAappE.jpg

  • Like 1
Posted
On 11/27/2017 at 10:38 PM, amxguy1970 said:

On coming drivers must love you, lifted and the nose high cali lean. You did adjust your headlights down right? Even stock headlights on stock trucks cause some annoyances, levelled you can really tell so with that set up I can only imagine. Sweet choice in wheels (nice to see a black wheel with some character), need to be a little smaller though.

 

Tyler

Why would anyone want smaller wheels or tires? ?

Posted
On 11/29/2017 at 4:17 PM, 03msc said:

 

Added a Ranch Hand grille guard to the '15 z71 the other day. Really like it - it's stout. 

DPLCAIlUQAAappE.jpg

Ranch Hand is the best. It looks great man. 

  • Like 1
Posted
4 hours ago, Ryan_OilEngineer_TX said:

Ranch Hand is the best. It looks great man. 

 

Thanks - very pleased with it!  Really like the look! 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,307 Guests (See full list)


  • Latest Articles

  • Posts

    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...