Jump to content

Post Pics of Your 2014+


Recommended Posts

Yes, they are the OEM wheels with 295/55R20 Toyo Open Country M/T’s. I also have 1-1/4” Bora spacers installed. 
I'm guessing with the 1.25" spacers on you had to trim the studs down a bit? I have 1.5" Bora spacers in the garage but I can't bring myself to trim the studs on this truck. I did on my 2011.

Sent from my SM-N950U using Tapatalk

Link to comment
Share on other sites

You can use 1.25” spacers without trimming the studs if you keep the OEM wheels. The pockets in the OEM wheels are deep enough. From my measurements, a 1.25” spacer is the limit without having to trim. Not wanting to trim the studs is the reason I went with 1.25” - didn’t want to trim either. 

 Your 1.5” spacers will work fine if you keep your stock wheels and they have the pockets. Not sure if all the OEM GM wheels have them. 

Edited by RigPig
Link to comment
Share on other sites

You can use 1.25” spacers without trimming the studs if you keep the OEM wheels. The pockets in the OEM wheels are deep enough. From my measurements, a 1.25” spacer is the limit without having to trim. Not wanting to trim the studs is the reason I went with 1.25” - didn’t want to trim either. 
 Your 1.5” spacers will work fine if you keep your stock wheels and they have the pockets. Not sure if all the OEM GM wheels have them. 
Usually the minimum spacer we can use is 1.75". However even that would be really close on both sets of 20" LTZ wheels I have. Even had to trim to use the stock 18" LT wheels on my 2011.
Not arguing that you didn't get lucky though. Dang , I wish that would work for me.
I didn't realize this when I ordered the spacers from Bora or I would have been done with it and gone with the 2" spacer.
Your truck looks great !!

Sent from my SM-N950U using Tapatalk

Link to comment
Share on other sites

12 minutes ago, michigan2500hd said:

Usually the minimum spacer we can use is 1.75". However even that would be really close on both sets of 20" LTZ wheels I have. Even had to trim to use the stock 18" LT wheels on my 2011.
Not arguing that you didn't get lucky though. Dang , I wish that would work for me.
I didn't realize this when I ordered the spacers from Bora or I would have been done with it and gone with the 2" spacer.
Your truck looks great !!

Sent from my SM-N950U using Tapatalk
 

It could be that the All Terrain wheels are different than some of the other models. I measured my studs and measured the pockets, then did a little math. I would have gone with more narrow spacers if the studs were shorter - I didn’t need to go that far out to clear the UCA’s , but now I’m glad I did. Thanks, I’m happy with how it turned out. 

Link to comment
Share on other sites

On 11/17/2017 at 6:10 PM, jgomez713 said:

 


What have you done to yours? I have a Black ultimate.


Sent from my iPhone using Tapatalk

 

It’s got a Gmc tonneau cover, black gmc badges, led reverse and license plate lights, in-channel rain guards, and mud flaps so far. I plan on doing a intake, dual exhaust, and possibly wheels. What are your plans for your ultimate? 

Link to comment
Share on other sites

On 11/18/2017 at 3:34 PM, fishin said:

2018 GMC All Terrain. 4 inch lift. 35 inch Toyo MTs.

truck .jpg

Nice look ! Rub ? Spacers ? 4" lift in front ,2 " in Rear seems dead level , How does it drive ? Good Luck With it !

 

  • Like 1
Link to comment
Share on other sites

Hi guys, 

 

I am new here and I have been enjoying my truck for about 7 months now. 

 

Just figured to take some photos of the truck since the first round of my mods is done. 

 

Mod list

- 18 inch Volk Racing TE37 Large PCD Wheels 
- Retrax Tonneau Cover
- AMP Research Powerstep

 

I hope you guys enjoy the photos :)

 

 

 

24679801588_2961bd3eeb_o.jpg

 

37835726204_cfb51f533b_o.jpg

 

24679799168_4097761e6b_o.jpg

 

37835725134_8640aa5900_o.jpg

 

37835724694_eb08dea89d_o.jpg

 

24679794538_8d35b13401_o.jpg

 

38552126151_e8ee14513d_o.jpg

 

24679792458_086ce5ded2_o.jpg

  • Like 5
Link to comment
Share on other sites

1 hour ago, Darthvader said:

Hi guys, 

 

I am new here and I have been enjoying my truck for about 7 months now. 

 

Just figured to take some photos of the truck since the first round of my mods is done. 

 

Mod list

- 18 inch Volk Racing TE37 Large PCD Wheels 
- Retrax Tonneau Cover
- AMP Research Powerstep

 

I hope you guys enjoy the photos :)

 

 

 

24679801588_2961bd3eeb_o.jpg

 

37835726204_cfb51f533b_o.jpg

 

24679799168_4097761e6b_o.jpg

 

37835725134_8640aa5900_o.jpg

 

37835724694_eb08dea89d_o.jpg

 

24679794538_8d35b13401_o.jpg

 

38552126151_e8ee14513d_o.jpg

 

24679792458_086ce5ded2_o.jpg

Did you dust it off before each photo? That is way to clean to have been down a dirt road, this is a truck that has been down a dirt road...

 

BTW, you might want to cover your license plate or someone might steal your identity and murder your family :lol:

 

Tyler

20170724_094407.jpg

Edited by amxguy1970
Adding sarcastic comment
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    245.8k
    Total Topics
    2.6m
    Total Posts
  • Member Statistics

    333,236
    Total Members
    8,960
    Most Online
    Lightning123
    Newest Member
    Lightning123
    Joined
  • Who's Online   4 Members, 0 Anonymous, 720 Guests (See full list)




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.