Jump to content

Recommended Posts

Posted
2 hours ago, Sean D said:

How about the steering wheel? What is the process for replacement?

The video above is good. I didnt need to change the clock spring because I was just swapping a worn steering wheel for new one. I will say this I was stumped for a bit trying to release the air bag clips. You really need to understand how they are held in to get them to release. The video above shows them better than the video I used. Overall it was a quick and painless procedure. 

  • Like 1
Posted

Yeah the airbag was my biggest problem took me about 30mins to figure out how to release them,I was use my phone the front face camera but I recommend using a mirror that made it way easier for me.

Posted
On 8/17/2019 at 2:58 PM, JimCost2014 said:

Looks great!

 

How "much work is involved" in changing the shift handle?

Something I have been thinking about doing.

 

On 8/17/2019 at 2:42 PM, Vulcan762 said:

After 112k miles the leather wrapped steering wheel and shifter handle in my 14 Sierra 1500 Denali were showing the wear and tear of the miles. So after a visit to EBay, $150 and 30 minutes later I have replaced them both with factory new OEM replacements. Came out great and was an easy way to take the miles back off my interior. 

 

6548E7A5-6364-4B4B-8878-79E6F7C34102.jpeg

Looks beautiful!   And easy on the wallet..

Posted
On 8/17/2019 at 8:09 PM, Vulcan762 said:

 

AE18D478-5193-4C43-8BD4-44DA3AFA38CD.jpeg

Thanks for the screenshot but would you happen to have a link to the seller?

Posted
5 hours ago, sk said:

Thanks for the screenshot but would you happen to have a link to the seller?

No link but neither seller have any more. Just widen your search terms on ebay and save the search so you get alerts when the item your seeking pops up for sale.

Posted

heres some pics of the 4' bds lift kit with moto metal 20x10s ridge grapplers 33x12.5

20190821_200508.jpg

  • Like 2
Posted
6 minutes ago, no12nv said:

heres some pics of the 4' bds lift kit with moto metal 20x10s ridge grapplers 33x12.5

20190821_200508.jpg

 

20190821_200620.jpg

  • Like 1
Posted
On 8/12/2019 at 9:56 AM, techsan15 said:

any rubbing?

yes. sway bar and UCA both sides only at very full lock. When you hold the wheel at full lock and let off a 1/2" inch it stops.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   0 Members, 0 Anonymous, 2,300 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • Paid $2.72 for E85 today.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...