Jump to content

Recommended Posts

Posted

Yesterday, I was out on lunch with a friend who drove. I work on an Army installation and the weather here is horrific (it was raining and the outside temp was 20 degrees) . While we were eating, (roughly 15 miles from work) I received an e-mail saying the Post was being closed due to weather and all employees were being sent home. We finished eating and headed back to get my truck, I started it up as soon as we headed back by using the app, after 15 min, I started it again, when we got to the parking lot the windshield was 80% defrosted, interior was nice an toasty and ready for me to leave post.

 

Outdoor temp right now is 9 degrees with the windchill, it snowed most of the night, can't wait to get out in it and play.

 

Mike

Posted (edited)

weather here is horrific (it was raining and the outside temp was 20 degrees)

 

It was -10 (without wind chill :happysad: ) this morning after 3 days of getting pummeled with snow...We got about 30" and up the shore they got around 42"... That being said, I'd rather have this than freezing rain.

 

Needless to say, I ran the remote start twice this morning and it was still a bit nippy - my appreciation for the heated steering wheel is immense.

 

I'm giving the block heater a whirl tonight - never used it on any of my vehicles, even in NoDak with -35 temps, but I think this one deserves a little pampering.

Edited by JCthebigTree
  • 1 year later...
Posted

I can't accept the 2 start limit. My cabin is 300 yds across a river from the parking area where we take off on snowmobile from the trucks. 6 miles to a solid stretch of ice then back along river to the cabin. I stay at cabin 4 days but can only remote start my Silverado twice from the cabin then must trek the 24 mile round trip to start with a key before the remote will work again!! My friends can remote start twice each day in the cold weather to make sure batteries stay good. Chev should make the restart option configurable by us owners at least to 6 times. Sometimes at home I remote start but get delayed a couple times before actually leaving and this limitation is a real PAIN in the butt!!


Posted

I can't believe that it helps their battery to do a cold start and a bit of idling.

Posted

I can't believe that it helps their battery to do a cold start and a bit of idling.

Agreed. Starting it and running for a short time does more harm than good. Also,, my truck routinely site for a week or more as I travel for work and never starts any different. Longest it sat was over three weeks in March two years ago. No issue.

Posted

On the GMT900's, you could do a remote start and then immediately follow the steps for remote start again and the system would run for 20 minutes total. In other words it treated each remote start cycle as a full cycle, it didn't just add 10 minutes to however long the truck has been running and negate the time still left on the initial remote start cycle. Are we certain the K2 trucks don't perform this way?

 

I haven't had a chance to try it yet because when I first got my truck it would only let me do one remote start cycle. I just noticed this past weekend I can do 2 now so at some point when a recall was done (probably the odometer peek in update), the system was updated and now functions properly.

Posted

On all the ones I've operated, the 2nd remote activation has always added 10 minutes to the current time.

Posted

On all the ones I've operated, the 2nd remote activation has always added 10 minutes to the current time.

 

Another step backwards with the K2 design...........

Posted

 

Another step backwards with the K2 design...........

I'm saying it's works the same as the GMT900's....

Posted

I'm saying it's works the same as the GMT900's....

 

So if you do a remote start cycle and then immediately do it after the truck has been running for say 1 minute, it will run for 20 minutes total and not 11 minutes?

Posted

If it has run for 1 minute and I recycle, I will end up with 11 minutes total, just like it did on my '11, my '10 and my '04.

Posted

its crap, and if you miss the cutoff at 10 mins, now your restarting the truck, can we say premature starter fail???? I start it after first alarm and then try and catch it ri after the snooze at 10 mins, sometimes I do sometimes I dont, and even after 20 mins on the cold cold days weve had that truck is still cold, my 05 would be warm and defrosted, I have not scraped a window in years, this might be my biggest complaint on this truck, magnified bye the fact that I work outside and the range on the remote is utterly horrible thank god for my onstar app that I won't have next year, maybe I will subscribe for the winter,

 

actually i plan on still putting in a aftermarket system, and the jabs earlier in the thread I get because I had a similar thread a while back and got told that its not right to have a vehicle run that long,

 

BOTTOM line is I work outside and when I'm freezing my tooshie off all day i want a warm truck, and bye the way GM I paid 40k for this dam truck and its my dam truck and with all the crap on there (intelilink) I still can't personalize "MY" truck. don't even get me started on why I can't dim the intelilink screen separately then the gauges thats gripe #2,

 

Otherwise its the best looking truck out there and rides like a dream! :driving: we will see how she tows in 4 months

Posted (edited)

its crap, and if you miss the cutoff at 10 mins, now your restarting the truck, can we say premature starter fail???? I start it after first alarm and then try and catch it ri after the snooze at 10 mins, sometimes I do sometimes I dont, and even after 20 mins on the cold cold days weve had that truck is still cold, my 05 would be warm and defrosted, I have not scraped a window in years, this might be my biggest complaint on this truck, magnified bye the fact that I work outside and the range on the remote is utterly horrible thank god for my onstar app that I won't have next year, maybe I will subscribe for the winter,

 

actually i plan on still putting in a aftermarket system, and the jabs earlier in the thread I get because I had a similar thread a while back and got told that its not right to have a vehicle run that long,

 

BOTTOM line is I work outside and when I'm freezing my tooshie off all day i want a warm truck, and bye the way GM I paid 40k for this dam truck and its my dam truck and with all the crap on there (intelilink) I still can't personalize "MY" truck. don't even get me started on why I can't dim the intelilink screen separately then the gauges thats gripe #2,

 

Otherwise its the best looking truck out there and rides like a dream! :driving: we will see how she tows in 4 months

 

 

Your OnStar app will work 5 years from the time you start your trial period, whether you subscribe or not.

Edited by txchevy4ever
Posted

If it has run for 1 minute and I recycle, I will end up with 11 minutes total, just like it did on my '11, my '10 and my '04.

 

Hmm that's weird my 2007 would run for the full 20 minutes in this scenario. It said it would do this in the manual too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I'm looking at carpal tunnel surgery on my left hand and lumbar fusion. 
    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • I was unaware of that, thanks for updating me.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...