Jump to content

2014+ Lowering / Drop Kits

mjw930

By mjw930
in Modifications & Accessories

 Share

Recommended Posts

GreyGhostZ71 Enthusiast

GreyGhostZ71

Posted
Posted

I used the Belltech drop shackles and I removed the blocks, for a total drop of 3", and I have no problems. Smooth as butta'!

 

 

That's wat I'd like to do. Maybe one day. Maybe just pull block for now.

 

 

Sent from Tapashit

  • Replies 3.4k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Heavy_Static
Heavy_Static

A few pics from last week:    

bakerrr
bakerrr

First post here Picked her about 2 weeks ago couldn't wait to start modifying it. Just installed Belltechs 4/7 drop this weekend It's low enough for the time being ??  

Nasty
Nasty

Posted Images

Yotaman Enthusiast

Yotaman

Posted
Posted

I used the Belltech drop shackles and I removed the blocks, for a total drop of 3", and I have no problems. Smooth as butta'!

 

Did you are the installer have to fold the seam on the bed with the BellTechs ??

 

Yotaman

bayouchub14 Enthusiast

bayouchub14

Posted
Posted

Hello all, I have 2014 Sierra 2wd, 1500, CC, standard bed. I recently installed a 4/6 DJM kit and have experienced some issues. First the stock 285/45/22 tires rub the fender well ALOT, and there is vibration that gradually increases from about 55 mph on up as you accelerate. I'm going to put smaller tires but want to fix vibe issue first, dont want to change to many things at once. The truck always had a flutter when taking off from a stop and still does. To be honest I dont even know where to start. I dont think it is pinion angle as the installer has checked it twice and says it is spot on. At least the installer has been good about it so far and willing to help but not sure what the fix maybe. Any ideas??

CrRdz Enthusiast

CrRdz

Posted
Posted

Hello all, I have 2014 Sierra 2wd, 1500, CC, standard bed. I recently installed a 4/6 DJM kit and have experienced some issues. First the stock 285/45/22 tires rub the fender well ALOT, and there is vibration that gradually increases from about 55 mph on up as you accelerate. I'm going to put smaller tires but want to fix vibe issue first, dont want to change to many things at once. The truck always had a flutter when taking off from a stop and still does. To be honest I dont even know where to start. I dont think it is pinion angle as the installer has checked it twice and says it is spot on. At least the installer has been good about it so far and willing to help but not sure what the fix maybe. Any ideas??

Any pics

 

Sent from my SM-T210R using Tapatalk

brentadams646 Enthusiast

brentadams646

Posted
Posted

Sorry not real hip on how to post pics.

 

Bayou, you said you were having the vibration issues before? I know a few shops in here have been installing 2pc drive shafts from the previous body style and it has been correcting drive line vibration issues.

bayouchub14 Enthusiast

bayouchub14

Posted
Posted

Brent thanks for the reply, yea the slight flutter when taking off from a stop has been there since day one. What has me more concerned are the vibes at hwy speeds. I have read a couple places were on older trucks this was corrected by basically installing a bracket that lifts the carrier bearing, however i cant find a kit like this for a 2014 GMC.

Plwtwo Enthusiast

Plwtwo

Posted
Posted

That was the good thing about previous gen trucks, 2 piece drive shafts... Then the '14's have very little play on top of one piece, so it's very easy to get it in a bind.

Plwtwo Enthusiast

Plwtwo

Posted
Posted

Did you are the installer have to fold the seam on the bed with the BellTechs ??

 

Yotaman

I had to flatten it totally out on all 3 2014 trucks Ive lowered.. Mine was worse then the other two, I ended up cutting mine off, because even flattened the damn top bolt wouldn't come out.

rang3l Enthusiast

rang3l

Posted
Posted

Hello all, I have 2014 Sierra 2wd, 1500, CC, standard bed. I recently installed a 4/6 DJM kit and have experienced some issues. First the stock 285/45/22 tires rub the fender well ALOT, and there is vibration that gradually increases from about 55 mph on up as you accelerate. I'm going to put smaller tires but want to fix vibe issue first, dont want to change to many things at once. The truck always had a flutter when taking off from a stop and still does. To be honest I dont even know where to start. I dont think it is pinion angle as the installer has checked it twice and says it is spot on. At least the installer has been good about it so far and willing to help but not sure what the fix maybe. Any ideas??

i lowered mine with the belltech 3 5 kit and i seem to also have that vibration rubbing sound in the rear as soon as i get closer to 50mph, installer notice that also and he installed a shim on transmission mount i believe? i couldnt quite understand him since they been working on it for like 10 hrs trying to figure it out, as this time i have no clue what to do as either as the shop who lowered the truck. [/url]">http://http://s801.photobucket.com/user/rang3l93280/media/1658650_916903208335602_3359907531639276262_o.jpg.html'>1658650_916903208335602_3359907531639276

haroldalfred New Member

haroldalfred

Posted
Posted

I'm looking for the best way to lower the rear of my 2014 2WD 1500 about 1.5". That will still give it about a 1.5" rake which should mean level when I'm towing. I considered drop shackles but was reading about removing the rear lift plate that's between the axle and spring.

 

My question is can the leaf spring sit directly on the axle or is some sort of spacer / bushing required for proper alignment and isolation?

I took the blocks out of my 2010, 2013 and now out of my 2014. Take the blocks out and use the same ubolts and put

6 washers on each ubolt stud, there is not any change in the ride. The blocks are a lttle over one inch but it looks like

you lowered it two inchs. The bottom line is the trucks looks a whole better. I am 71 years old and it is easy to do for an old

man, my 5 year old granson can do it.

xtremes1088 Enthusiast

xtremes1088

Posted
Posted

So after I get back from vacation I plan on ordering a kit for my 4wd Denali, the truck that made me decide to lower it is an all terrain 4wd with a 4/7 drop thinking I might follow his lead any suggestions?

nate538 Enthusiast

nate538

Posted
Posted

So after I get back from vacation I plan on ordering a kit for my 4wd Denali, the truck that made me decide to lower it is an all terrain 4wd with a 4/7 drop thinking I might follow his lead any suggestions?

So far I've talked to Mcgaughys and Belltech. Belltech told me they haven’t tested anything on the 4wd yet and the don't recommend trying to use any of their 2wd products on a 4wd. Mcgaughys has a 2/4 kit but I personally don't like it, They did tell me that the rear parts are all the same but they don’t have anything available to get the front lower than 2 inches. If anyone knows of anything else available I'd like to know

  • Like 1
xtremes1088 Enthusiast

xtremes1088

Posted
Posted

So far I've talked to Mcgaughys and Belltech. Belltech told me they havent tested anything on the 4wd yet and the don't recommend trying to use any of their 2wd products on a 4wd. Mcgaughys has a 2/4 kit but I personally don't like it, They did tell me that the rear parts are all the same but they dont have anything available to get the front lower than 2 inches. If anyone knows of anything else available I'd like to know

He's using the mcgaughey 2wd adjustable kit, I confirmed it with him he notched the rear frame however and set up a helper bag for towing, he's got it on the full 4/7 drop

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Fatboy2V-rod
      Whirring when accelerating at 1100 rpms 2022 LTZ 5.3

      By Fatboy2V-rod · Posted

      Good morning! I have a whirring sound coming from the engine or transmission area when driving w/o towing when I accelerate at 1100 rpm’s. That’s how it started. Yesterday it was more obvious while towing a U-Haul even when not accelerating at 70 mph. I could see where it may have been possibly shifting gears due to a slight grade and the intermittent rpm changes as the transmission was possibly lowering the gear down. It was making the sound multiple times but it is not constant. I replaced the serpentine belt and idler pulley but no change. It only does it when I’m driving. No noise accelerating while in park. Just started @ 53,000 miles. It’s not always there though. Unfortunately, I feel it may be transmission related. Any thoughts or knowledge about the 2022 tranny that anyone can share. I have 2500 miles left on my p-train warranty. Thanks to all for any help! 
    • Atlas
      Winter Returned

      By Atlas · Posted

      RAIN. It's dumping buckets. We needed it. What a welcome change...sitting here listening to it pour with my office window open.   Ok, not too much. It's not even September yet, we're not finished with summer yet....
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      If you have actually done it, there must be some secret tool or method of accessing the hidden bolt head that both manifold connections have. Two of the three bolt heads are staring at you in the face from below but the third one is covered by shielding and as far as I know only accessed by removing part of the fender well lining to gain access to it and even then its awful to access or from what I had seen of someone fighting with it on a video.    There is a reason why even mechanics that deal with the awkward or risky business of undoing the exhaust at the manifolds have done the same method others are doing with these L8T by flexing the exhaust if need be or just able to slip the pan out as I did without needing to touch hardware or pry on the exhaust. By rights the two seals should be replace when those joints are cracked loose as well.     
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      Actually it was a lot more controlled then I thought it might be and that isn't actually when I spilled some oil. I had thought prior of rounding up a couple of longer bolts with the same thread to swap out for a couple of the front edge pan bolts and then leaving one bolt left in the back but loosened off and then using a suction device to remove most of the fluid, that certainly would have worked and while I do have a couple of different devices I could have used to suck the fluid, now having done the job once I wouldn't even bother. I had thought of buying one of those pressurized vessels to suck or new fluid in and would if I was doing a job like this on a few vehicles but with one vehicle I just didn't bother and I have pail pumps as well I could have used assuming the hose end would fit into that less than roomy space but being such a thin fluid it pumped well with a quart type pump and just kept the hose into the trans and kept swapping containers and repeat.    What I would change to the method I did though was first jack up just the rear of the truck to put on jack stands to allow more oil to come out of the check plug on the front of the pan ( and as I did, I made sure to put that drain plug back in finger tight ) then follow through by putting the front on jack stands. Also that I would have used a larger sized drain pan in the sense of covering an area wider/longer beyond the transmission but I didn't have one and saw someone else on a youtube video using a masonry mud mixing tub and bought one at a hardware store to use in the future. The main oopsy  I did and why I spilled some oil was all my fault as I neglected to follow my own plan, I should have let down the pan as I did to drain out the front of it as much as would come out but then scooped out the remainder of the oil with the Dixie cup I had sitting there just for that purpose as by that point there is enough room to reach right into the front of the pan and just bail it out basically. 
    • No F-bdy Bs
      Correct way to service 2024 l8t allison trans?

      By No F-bdy Bs · Posted

      Pretty easy to just remove/drop the exhaust behind the manifolds. They're in no way hard to get to. Maybe 5min of work, and you get the opportunity to put some anti-sieze on them in case anything ever comes up, you eliminated the risk of snapping a stud. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...