Jump to content

2014+ Lowering / Drop Kits

mjw930

By mjw930
in Modifications & Accessories

 Share

Recommended Posts

L150 Enthusiast

L150

Posted
Posted

Holy crap you must have a huge front rake. I have a 4/7 with abkut 20lbs of sir in the helpers so it's about a 4/6. With 28" tire up front and 30 rear and I have a big rake. Why 4/5 and bit 4/6 or even 3/5?

the rake not to bad at all. I had the rear set out 6 inches and was bottoming out when I had the truck loaded down with people. plus I pull a big bumper camper and car hauler too from time to time. here are some pics

post-167294-0-05591200-1506957189_thumb.png

post-167294-0-69065900-1506957206_thumb.jpg

post-167294-0-05591200-1506957189_thumb.png

post-167294-0-69065900-1506957206_thumb.jpg

post-167294-0-05591200-1506957189_thumb.png

post-167294-0-69065900-1506957206_thumb.jpg

post-167294-0-05591200-1506957189_thumb.png

post-167294-0-69065900-1506957206_thumb.jpg

  • Like 1
  • Replies 3.4k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Heavy_Static
Heavy_Static

A few pics from last week:    

bakerrr
bakerrr

First post here Picked her about 2 weeks ago couldn't wait to start modifying it. Just installed Belltechs 4/7 drop this weekend It's low enough for the time being ??  

Nasty
Nasty

Posted Images

thepuppetmaster New Member

thepuppetmaster

Posted
Posted (edited)

Picked up this 17 about a month ago, first thing I did was debadged it, got some factory painted mirror caps/handles, and black front emblem. Then I ordered a belltech 4/7 kit and had it installed, ended up putting in the 1" lift shackle cuz I like a little rake. Still debating about going down 1 more inch front and rear. Here's a few pics....

 

Your truck looks great!

 

I have been looking at the belltech drop kit after talking to a local shop, the kit in the link below is the kit they suggested. I'm currently on 18" wheels and love them, I plan on keeping them for a little while, I don't know why, I just like the way the smaller wheels look.

 

http://www.jegs.com/i/Belltech/146/992SP/10002/-1?CAWELAID=230006180002524102&CAGPSPN=pla&CAAGID=15769068431&CATCI=pla-177235372631&CATARGETID=230006180003468651&cadevice=c&gclid=CjwKCAjw6szOBRAFEiwAwzixBa5dj1zBV4owaR8TB_DQTuiz0otq9YovCNP1kCzA4TmuX2HoxD2_7xoCm2QQAvD_BwE

 

If you don't mind me asking what kit did you go with and what did it cost to install? any feedback is appreciated

Edited by thepuppetmaster
Nasty Senior Enthusiast

Nasty

Posted
Posted

Your truck looks great!

 

I have been looking at the belltech drop kit after talking to a local shop, the kit in the link below is the kit they suggested. I'm currently on 18" wheels and love them, I plan on keeping them for a little while, I don't know why, I just like the way the smaller wheels look.

 

http://www.jegs.com/i/Belltech/146/992SP/10002/-1?CAWELAID=230006180002524102&CAGPSPN=pla&CAAGID=15769068431&CATCI=pla-177235372631&CATARGETID=230006180003468651&cadevice=c&gclid=CjwKCAjw6szOBRAFEiwAwzixBa5dj1zBV4owaR8TB_DQTuiz0otq9YovCNP1kCzA4TmuX2HoxD2_7xoCm2QQAvD_BwE

 

If you don't mind me asking what kit did you go with and what did it cost to install? any feedback is appreciated

I have mcg. He has the belltech kit and he had some alignment issues

thepuppetmaster New Member

thepuppetmaster

Posted
Posted

I have mcg. He has the belltech kit and he had some alignment issues

thank you, I must have misquoted.

 

I have looked at MCG as well,

 

https://www.suspensionsuperstore.com/2014-2016-chevy-silverado-1500-crew-cabs-3-5-4-6-5-7-adjustable-drop-kit-mcgaughys-34170/

 

I have been chasing my tail in circles trying to find a kit...

 

do you like the MCG?

wantavant Enthusiast

wantavant

Posted
Posted

Your truck looks great!

 

I have been looking at the belltech drop kit after talking to a local shop, the kit in the link below is the kit they suggested. I'm currently on 18" wheels and love them, I plan on keeping them for a little while, I don't know why, I just like the way the smaller wheels look.

 

http://www.jegs.com/i/Belltech/146/992SP/10002/-1?CAWELAID=230006180002524102&CAGPSPN=pla&CAAGID=15769068431&CATCI=pla-177235372631&CATARGETID=230006180003468651&cadevice=c&gclid=CjwKCAjw6szOBRAFEiwAwzixBa5dj1zBV4owaR8TB_DQTuiz0otq9YovCNP1kCzA4TmuX2HoxD2_7xoCm2QQAvD_BwE

 

If you don't mind me asking what kit did you go with and what did it cost to install? any feedback is appreciated

Belltech is good stuff. How low are you planning on going and what year is your truck?? I paid 550 for my install but the guy has done a few kits for me so I got a deal. I went 5 in the front and got a new upper control arm from Inez hot rods so I don’t have to worry about camber issues. Let me know what year your truck is and which arms you have?

 

 

Sent from my iPhone using Tapatalk

Nasty Senior Enthusiast

Nasty

Posted
Posted

thank you, I must have misquoted.

 

I have looked at MCG as well,

 

https://www.suspensionsuperstore.com/2014-2016-chevy-silverado-1500-crew-cabs-3-5-4-6-5-7-adjustable-drop-kit-mcgaughys-34170/

 

I have been chasing my tail in circles trying to find a kit...

 

do you like the MCG?

I have that kit minus the rear shocks I like it. No issues. But I am swapping the struts out for coilovers

wantavant Enthusiast

wantavant

Posted
Posted

Honestly. Next time I am going with the fill Inez hot rod kit. They do control arms and you can go 4-6 up front and the flip kit has shims built right into it to get the pinion angle exactly right. All for 720 including rear shocks.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Nasty Senior Enthusiast

Nasty

Posted
Posted

Honestly. Next time I am going with the fill Inez hot rod kit. They do control arms and you can go 4-6 up front and the flip kit has shims built right into it to get the pinion angle exactly right. All for 720 including rear shocks.

 

 

Sent from my iPhone using Tapatalk

Remember I told you about the tire getting pushed back into the fender well? Take a look at the inez k2 kits. They didn't even correct for that. That kit set at 4" is worse then your teuck set at 5. Ill pass on that inez kit. Most people don't look at things like that

wantavant Enthusiast

wantavant

Posted
Posted

Remember I told you about the tire getting pushed back into the fender well? Take a look at the inez k2 kits. They didn't even correct for that. That kit set at 4" is worse then your teuck set at 5. Ill pass on that inez kit. Most people don't look at things like that

Guess I never paid attention to that but if that is the case then I would stick with either belltech or mcg for sure. Can’t go wrong either way.

 

 

Sent from my iPhone using Tapatalk

Goinovr Enthusiast

Goinovr

Posted
Posted

Remember I told you about the tire getting pushed back into the fender well? Take a look at the inez k2 kits. They didn't even correct for that. That kit set at 4" is worse then your teuck set at 5. Ill pass on that inez kit. Most people don't look at things like that

Can you elaborate on this?

Nasty Senior Enthusiast

Nasty

Posted
Posted

Can you elaborate on this?

07-17 trucks. When you lower them. The front wheel moves back in the wheel well making the wheel not centered

Goinovr Enthusiast

Goinovr

Posted
Posted

07-17 trucks. When you lower them. The front wheel moves back in the wheel well making the wheel not centered

 

Thanks. I'll measure mine. Currently running the IHC 4/5 kit.

DeepBlue17 Enthusiast

DeepBlue17

Posted
Posted (edited)

I run the 4 inch DJM arms and McGaughys struts set at an additional 2 inches. I don't have an issue with front wheels being pushed back.

post-174281-0-14462400-1507076827_thumb.jpg

post-174281-0-14462400-1507076827_thumb.jpg

post-174281-0-14462400-1507076827_thumb.jpg

post-174281-0-14462400-1507076827_thumb.jpg

Edited by DeepBlue17
Nasty Senior Enthusiast

Nasty

Posted
Posted

I run the 4 inch DJM arms and McGaughys struts set at an additional 2 inches. I don't have an issue with front wheels being pushed back.

Djm arms correct the issue to a point. If you take a picture of the side of the vehicle. You'll be able to see it not much with yours. But if you went lower it would get worse

DeepBlue17 Enthusiast

DeepBlue17

Posted
Posted

Djm arms correct the issue to a point. If you take a picture of the side of the vehicle. You'll be able to see it not much with yours. But if you went lower it would get worse

If I go any lower I can't drive it. Already damn near ride the upper inner fender if I have more than one other person in the truck. LOL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Yes that's right, it's the upgrade that includes the overload spring and all that stuff.   Someday when I'm empty and going by a scale I'm going to stop in and get some weight readings.   Exactly  you should have the ability to change individual settings, in in Canada so I'm driving with kph but then I'm stuck with kpa when I want psi lol    
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      You must have that upgraded gvw package which is only available or at least was in 2025 with the diesel engine for the 3/4 ton and that gave the truck physically the larger 12.0 ring gear rear diff and the 3500 rear spring pack. There is a difference in what the diff housing looks like externally as one tell tale and also your truck should have the upper overload spring pack and the frame pads that the pack goes up against.    The pressure the tpms system kicks the alarm in on a stock setting truck, that is a good question and was just from what I recall but I doubt I made any notes on it as I knew for the rear that it was not at all what I was after regardless either. Being that you have a diesel and if running on stock tires the minimum pressure on an empty truck seems to be around 50 psi from hearing of those that have weighted the front axle but the rear axle is very similar in weight to a gas truck and again a near empty truck on the rear could go down to 35 pounds at minimum. However the weigh scale is the proper way to know for sure as a guide.    As to changing the readings on the dash from metric to the US measuring system, oh yes that is done easily but what I was attempting to explain was that I can't pick and choose items I want to have in US and those I still want in the metric system at the same time as its either all or none. For example lets say you drove into Canada and switched your dash over to metric so your speedometer read in km an hour, well then your reading kilopascals on your tpms readout and your wife looks over and says what the hell is that saying in the tpms screen and you say "darned if I know, I think its Chinese" !
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      This is partly why I decided to have switched over to Amsoil SS as a way of hopefully preventing the buildup of the sludge/carbon on the pistons and clogging of the oil control rings and the carbon that would cause the compression rings to stick in their grooves as well as stay cleaner up top of the heads in the valve train in the first place, an oil that has tested better by third party testing over typical shelf oil and also doing my best to run relatively short OCI. However in saying that I don't think there is any way to easily prove the oil I was using prior allowed for a buildup at the OCI I was doing, nor in the other direction to make claims the Amsoil is keeping everything clean either. There really isn't a window into the engine is there to know anything for certain even if oil samples were taken for example that showed still healthy oil being dropped out of the oil pan other than engine tear downs that extensive and expensive testing of oils does to actually visually see what is really going on inside the engine. I wish there was some easy method of seeing what is going on but I don't happen to be aware of that if there is.  
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      My truck is a ¾ ton but my placard also says 80 for the rear tires, I think I might have the upgraded suspension to the 3500 series maybe.   I put my air down to 60 and the light was still on, and there was no way I was putting over 60 psi in the rear empty and not towing because I knew the actual number Toyo gave me and I didn't wanna ruin the center of my tires!   And you actually can change it in the settings from metric or is and it will show kph or mph then when you go into your tire settings it will be either psi or kpa, but it would be nice to just change it directly on the tire psi page 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...