Jump to content

Center console swap?

quickvert1

By quickvert1
in Modifications & Accessories

 Share

Recommended Posts

  • Replies 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

darkfox1
darkfox1

OK.. mine's in.   Here's a writeup, cos I haven't seen one so far.   1. remove the "ash tray" and cig. ligther in your dash with 3 t-10 torx screws, and 2 clips. 2. Remove the radio trim, clips i

dla
dla

I always wanted a RCSB with buckets and a center console...   Received and installed mine yesterday. Very straight forward, thanks for all who posted instructions and part numbers.   Possibly to h

o7bodybagged
o7bodybagged

Finally the console is complete now ready for the install and see what other problems I run into

Posted Images

FR93 Enthusiast

FR93

Posted
Posted

I was finally able to get my console installed, the advice on this thread was great. I didn't feel confident enough with the USB's to attack this myself so I brought it to a audio shop. They were able to get everything working while using a combination of the two harnesses. This was great swap and I recommend it to anyone on the fence.

 

I have a black leather jump seat that Im looking to sell, PM if interested.

Danny_Sierra Enthusiast

Danny_Sierra

Posted
Posted

I always wanted a RCSB with buckets and a center console...

 

Received and installed mine yesterday. Very straight forward, thanks for all who posted instructions and part numbers.

 

Possibly to help others, here are the part numbers I used...

 

22995066 Console - Jet Black w/chrome handle (inside 2 USB, 1 SD card slot, aux jack, 1 12V outlet) (rear 1 12V outlet)

22995093 Plate - Synthesis (front 2 12V outlets, 3 USB) with cup holder

22817347 Panel - Black (right)

22817349 Panel - Black (left)

22776807 Bracket (was told by two suppliers this is no longer available from GM)

 

Installed without bracket to dash for now. Console is very solid with no movement or vibration at all.

 

I did not need to remove either of the seats.

 

Used the harness from my jump seat and spliced in console lead to rear 12V outlet.

Existing 12V in dash split for two front outlets with console light powered from these outlets as well.

 

Everything works except the front USB's.

 

Photos...

Hey man I really need your help! I have a rscb with bench seat. I'm buying a center console. But also I have a custom ported sub box behind the passenger seat,but the sub is directly behind the center console. I just want to know how long the new center console is compared to the bench. Is it longer? Or shorter? From the top rear end of the my bench seat to the top front where the dash meets I have about 31 and a half inches to 32 inches
dla Enthusiast

dla

Posted
Posted

Hope this helps...

 

Mine measures 32" from the dash to the rear top edge of the console. The back of the console curves further back some as it goes towards the floor. The space behind the console to the back of the cab (carpet panel) is about 7" at the top and 5" half way down to the floor.

Danny_Sierra Enthusiast

Danny_Sierra

Posted
Posted

Hope this helps...

 

Mine measures 32" from the dash to the rear top edge of the console. The back of the console curves further back some as it goes towards the floor. The space behind the console to the back of the cab (carpet panel) is about 7" at the top and 5" half way down to the floor.

Thanks alot man! This helps alot
schlegle1 Senior Enthusiast

schlegle1

Posted
Posted

i can't seem to get my front USB connections working. Ive ran power to them at pin #4 and #6 but tapping into the wiring for the cig lighter up front and i ran a USB from it to the GREEN open slot on the HMI module? I plug something into it and get nothing. If i test power i have good power so thats not my issue; I'm assuming my problem lies somewhere in the USB connection or possibly am i plugging it into the wrong spot on the HMI module? (as far as i remember that is the only open slot on my HMI…)

  • Like 1
jcastyo Enthusiast

jcastyo

Posted
Posted (edited)

As far as connecting wires for console light and switch, I read on a post that someone connected (spliced) the wires to the cigarette lighter in the front of the console. I would need to run wire to the front so obviously i would need to get donor wire from the console harness, but does it matter what size wire. Should it be the same size or would it need a thicker size wire (gauge wise). I should have left the white/black wire intact as it would have reached the front and the black one was spliced into 2 other wires with a larger one going to the front.

 

Thanks

post-125084-0-25583000-1443895820_thumb.jpg

post-125084-0-25583000-1443895820_thumb.jpg

post-125084-0-25583000-1443895820_thumb.jpg

post-125084-0-25583000-1443895820_thumb.jpg

Edited by jcastyo
  • Like 1
jcastyo Enthusiast

jcastyo

Posted
Posted (edited)

Is there a solution to the USB ports not playing music?

I don't think there is anything plug/wire wise to get data through the front usb ports at least for the 2014 without floor console. I don't know if anyone has tried this already but I took the usb connector from the jump seat and plugged in the 6 pin connector using the red and black for power and connected a usb cable to the black connector on the hmi and I got music playing. I moved the usb connection to the green port and nothing, only charge.

 

I think either it is software (programming) to disable/enable the data bus or the pins for the usb connector are not connected on the circuit board within the hmi. I am tempted to open the hmi to look at how the usb connections are done. Also the blue usb connection gives display on the lcd screen.

Edited by jcastyo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,979
    Total Members
    8,960
    Most Online
    rayredbone
    Newest Member
    rayredbone
    Joined

  • Who's Online   2 Members, 0 Anonymous, 552 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      AFM Experience

      By Grumpy Bear · Posted

      Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • newdude
      Seems to be Missing a lot of Updates

      By newdude · Posted

      GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Blade8971
      Upgrade to a 2026 AT4 with the 3.0L Duramax

      By Blade8971 · Posted

      Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...