Jump to content

Recommended Posts

Posted

post-127636-0-79512600-1418859423_thumb.jpg

 

It's sideways, I know. I'm terrible with computers, I have no idea why it keeps doing this. Anyway list of current mods;

 

2014 Sierra All Terrain 6.2 in Iridium metallic

Rough Country 2.5" level

Zone Offroad 1.5" body lift

Custom exhaust Aero Turbine 3030's with black MBRP tips

20x9 Fuel Krank's

285/55/20 Open Country AT2 Extreme

Smoked Tails and 3rd brake light

Beamers 6000k HID's

Rigid Fog light kit

Color matched wheel well mouldings

color matched mud flaps

AFE momentum intake

2 12" JL Audio Subs

N-Fab cab length ankle breakers

Shaved all badges and emblems

20% tint all around

 

...I'm running out of ideas

post-127636-0-79512600-1418859423_thumb.jpg

post-127636-0-79512600-1418859423_thumb.jpg

post-127636-0-79512600-1418859423_thumb.jpg

Posted

attachicon.gifphoto(3).JPG

 

It's sideways, I know. I'm terrible with computers, I have no idea why it keeps doing this. Anyway list of current mods;

 

2014 Sierra All Terrain 6.2 in Iridium metallic

Rough Country 2.5" level

Zone Offroad 1.5" body lift

Custom exhaust Aero Turbine 3030's with black MBRP tips

20x9 Fuel Krank's

285/55/20 Open Country AT2 Extreme

Smoked Tails and 3rd brake light

Beamers 6000k HID's

Rigid Fog light kit

Color matched wheel well mouldings

color matched mud flaps

AFE momentum intake

2 12" JL Audio Subs

N-Fab cab length ankle breakers

Shaved all badges and emblems

20% tint all around

 

...I'm running out of ideas

Put a blower on that 6.2 lol

 

Sent while in 'Murica...

Posted (edited)

Put a blower on that 6.2 lol

 

Sent while in 'Murica...

If I had an extra 20 g's I could just wipe my a$$ with, I would. Unfortunately that isn't the case lol

Edited by retodd709
  • Like 1
Posted

attachicon.gifphoto(3).JPG

 

It's sideways, I know. I'm terrible with computers, I have no idea why it keeps doing this. Anyway list of current mods;

 

2014 Sierra All Terrain 6.2 in Iridium metallic

Rough Country 2.5" level

Zone Offroad 1.5" body lift

Custom exhaust Aero Turbine 3030's with black MBRP tips

20x9 Fuel Krank's

285/55/20 Open Country AT2 Extreme

Smoked Tails and 3rd brake light

Beamers 6000k HID's

Rigid Fog light kit

Color matched wheel well mouldings

color matched mud flaps

AFE momentum intake

2 12" JL Audio Subs

N-Fab cab length ankle breakers

Shaved all badges and emblems

20% tint all around

 

...I'm running out of ideas

Running out of ideas? You must not have been around here for long! You'll get some more. A lot more. Don't worry!

Posted

Nice I like them much better black.

Sent from the future via a wifi time portal.

Did u do then yourself or have them done? How does it hold up

Posted

Plasti Dipped my stock A/T wheels black.

r8UOGQs.jpg

Did u do it yourself or have it done? How does it hold up

Posted

Did u do it yourself or have it done? How does it hold up

I'm not Gatori but I feel like I could answer your question as well, I did mine in August and have only had an issue once and that's because I missed a spot so it started peeling. I haven't had any issues other than that. Mine have held up very well. Just make sure you've got a good 4-5 coats so it's easy to remove if needed.

 

Just thought I'd give some input on dipped rims!

Posted

I did black and I put on about 6 or 7 coats. It seems to hold up. I've had mud on them and rocks hit em in the few days that i've had it. Only time will tell.

Posted

Its been long over due of what ive done so far: got my windows and windshield tinted, added a gibson exhaust, added floor lights, added lights to the center console that come one at night, swapped out headlights for projector lights and HID, plastidipped bowties and side emblems, rough country 2.5" lift, swapped stock tires for 275/77R18 exo grapplers, plastidipped rims (need to be redone after getting my tires)

med_gallery_133438_2998_892935.jpg

med_gallery_133438_2998_59490.jpg

med_gallery_133438_2998_80941.jpg

med_gallery_133438_2998_551369.jpg

Did u wire in the LEDs ur self? If so how did u get them to come on only at night and do u have an override switch or would it be possible the way u done it? Ur light setup up is unique and I like it!!

 

 

Sent from my iPhone using Tapatalk

Posted

Did u wire in the LEDs ur self? If so how did u get them to come on only at night and do u have an override switch or would it be possible the way u done it? Ur light setup up is unique and I like it!!

 

 

Sent from my iPhone using Tapatalk

Yes i wired them myself, I can take some pictures later of the wires i tapped into. It is possible for you to wire a switch in to turn them off. As of right now the red lights dim with the interior dimmer switch, the white lights are only on when the doors open.

Posted

Yes i wired them myself, I can take some pictures later of the wires i tapped into. It is possible for you to wire a switch in to turn them off. As of right now the red lights dim with the interior dimmer switch, the white lights are only on when the doors open.

Could the white light be wired to dome switch too? So if I turn on dome lights then foot light will come on? Thanks for your help

Posted

Could the white light be wired to dome switch too? So if I turn on dome lights then foot light will come on? Thanks for your help

Yes. Just tap into the dome light switch wire. I'm going to be doing mine soon

 

Sent while in 'Murica...

Posted
Yes. Just tap into the dome light switch wire. I'm going to be doing mine soon

 

Sent while in 'Murica...[/quote

 

Which is what wire is what I was asking? If anyone knew?

 

 

Sent from my iPhone using Tapatalk

Posted
Yes. Just tap into the dome light switch wire. I'm going to be doing mine soon

 

Sent while in 'Murica...[/quote

 

Which is what wire is what I was asking? If anyone knew?

 

 

Sent from my iPhone using Tapatalk

I'm not sure exactly which wire but there is a youtube video on it. I believe it is gray but not 100% sure

 

Sent while in 'Murica...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I just brought home a 2020 GMC 1500 Denali.  She has 53K miles on her and I want to change out the fluids over the next few weeks.  I see the diff covers don't have drain plugs.  Any suggestions where I can pick up front and rear diff covers with drain plugs?   Thanks,   Bob
    • Well, the dealership got the compressor and installed it. Air at the vents seems nice and cold as it should be. The service manager said the repair has a two year warranty and unlimited mileage. Hopefully I don't have to use it. The dealership i went to was one where I bought my 2014 half ton silverado. In 10 years and 168k miles on the truck anything I needed done and two small recalls they were always very good to me. Not a huge dealer either. I think they treat people well because they want you to come back. I have dealt with a different dealer that was too big to care about an individual. Just my two cents.
    • Hi All, I operate my 2021 3500 SLT most of the time with the tailgate off and in a crate because I have a slide-in camper. However, at least once a year, I take the camper off and put the tailgate back on. Recently I installed the tailgate, but had a hard time getting the connector bail to swing to the fully latched position. The connector seems to fully seat, and everything works, but the bail doesn’t swing to fully latched position.  It swings almost there but stops and I am afraid to push it any harder.    Does anyone have any advice on cleaning or lubrication or anything else I should be doing?  i know how to properly operate the connector. During the time the tailgate and connector are off, i have a double plastic bag over the truck connector secured with rubber bands to keep it clean, but it still had some dust in it this time when I blew it out with compressed air. I didn’t want to spray it with anything other than air without doing some research. Thanks. 
    • There are a lot of spammer's that do that, quote something and add some commentary to make it seem legit, but modify the quoted text a bunch making sure when posted it's long enough to be "click to expand", and either immediately insert a spam link, or come back after some time and edit it to add the spam link.
    • Hello @jaszr2 Do you have a link for the item? I put a replacement bumper on my truck and consequently had to relocate the shutters. I studied on them a while, and figured if you left a couple key blades, you could get most of the airflow with probably no throwing codes.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...