What have you done to your K2 today?

Deadpoollane · May 28, 2018

Has anyone successfully taken off the “mustache” on the front end of a Silverado?

No matter how I bend the chrome tabs on the inside it won’t give.

I removed both clips on both sides but still nothing

Sent from my iPhone using Tapatalk

TX LIMO · May 28, 2018

Got Bored so Wrapped this piece in Vinyl.

Looks really good. I did all my interior trim pieces in Realtree vinyl. It was definitely a pain in the @55 over the corners. Helped out that I got an inexpensive heat gun to help smooth out the edges.

Delivered via my cellular device using a mobile chat forum thingy.

Deadpoollane · May 28, 2018

Hook up led plate lights and reverse lights.

Got my dash cam hooked up

Have a bunch of red Silverado logos so tried one on the front really hard to make it look straight because of the slight decline/incline

Sent from my iPhone using Tapatalk

cbrsilv15 · May 28, 2018

8 minutes ago, Deadpoollane said:

Hook up led plate lights and reverse lights.

Got my dash cam hooked up

Have a bunch of red Silverado logos so tried one on the front really hard to make it look straight because of the slight decline/incline

Sent from my iPhone using Tapatalk

A decal would probably be easier. I can just imagine the headache trying to clean bug guts from inside the letters. Lol!

MixerDriver · May 28, 2018

Finally got around to cleaning/repainting my ugly, rust covered frame. Did everything behind the front fenders, my wax is still well in tact up in the front.

Deadpoollane · May 28, 2018

A decal would probably be easier. I can just imagine the headache trying to clean bug guts from inside the letters. Lol!

I’ll leave it for probably a week before it bugs me

Sent from my iPhone using Tapatalk

Viktorrocks15 · May 28, 2018

Has anyone successfully taken off the “mustache” on the front end of a Silverado?

No matter how I bend the chrome tabs on the inside it won’t give.

I removed both clips on both sides but still nothing

Sent from my iPhone using Tapatalk

So what you want to do is start from either side and work your way to the opposite side, I’ll recommend having several flat heads so when you pry them out and insert a flat head in place so they tabs don’t lock on you again, asked dealer how much they charge to remove it and said 200 cause they need it to take the front bumper off, I did it in 15 min.

Sent from my iPhone using Tapatalk

Deadpoollane · May 28, 2018

So what you want to do is start from either side and work your way to the opposite side, I’ll recommend having several flat heads so when you pry them out and insert a flat head in place so they tabs don’t lock on you again, asked dealer how much they charge to remove it and said 200 cause they need it to take the front bumper off, I did it in 15 min.

Sent from my iPhone using Tapatalk

Thank you, I was worried it wasn’t just the chrome tabs.
I guess I have to just got at it harder.

Sent from my iPhone using Tapatalk

Crazy Schooner · May 28, 2018

3 hours ago, Madcow2020 said:

Is that the Alu Cab Foxwing 270, And what bed rack is that?

It's the Alu Cab Shadow Awning. I had the bed rack built locally.

Madcow2020 · May 29, 2018

It's the Alu Cab Shadow Awning. I had the bed rack built locally.

Post that thing in the overland thread.

Sent from my iPhone using Tapatalk

2017_LTZ · May 29, 2018

Finally had some time over the long weekend to get my leveling kit installed and have the truck aligned.. Next thing on my list is to adjust my headlights as now I am blinding everyone headed my way ....

Ravenkeeper · May 29, 2018

6 hours ago, 2017_LTZ said:

Finally had some time over the long weekend to get my leveling kit installed and have the truck aligned.. Next thing on my list is to adjust my headlights as now I am blinding everyone headed my way ....

Give them a 1/4 turn (I forget which direction) each, drive that way for a couple weeks, then adjust again, if they keep flashing you. I uploaded a image of how to do adjust them, somewhere, but the trick, with that one, is to have a flat driveway/parking lot and a garage door/wall @ 90º angle with pavement.