Jump to content

Handgun Advice


RyanbabZ71

Recommended Posts

Posted

When it comes to home defense nothing beats a shotgun. I would never pay $500 for a walfart gun though. My closet gun is an old Winchester with exposed hammer. I like it because most people don't know how to use it. It can be slam fired too. If I was to buy a "home defense" shotgun it would be a Remington 887 tactical.

 

As far as pistols, I'm looking at a Walther PPQ M2. 5" barrel and 9mm.

  • Replies 133
  • Created
  • Last Reply
Posted

When it comes to home defense nothing beats a shotgun. I would never pay $500 for a walfart gun though. My closet gun is an old Winchester with exposed hammer. I like it because most people don't know how to use it. It can be slam fired too. If I was to buy a "home defense" shotgun it would be a Remington 887 tactical. As far as pistols, I'm looking at a Walther PPQ M2. 5" barrel and 9mm.

 

How is your comment about how you wouldn't buy a gun from walmart helpful??? They sell all the name brand guns!!!

Posted

$500 seems steep for a basic 12ga.

 

Thats because its not a basic shotgun.....its a 18.5 breach barrel tactical shotgun that the stock and forearm can be swapped out to allow for different variations. 1 minute the gun can be a pistol grip shotgun and 30 seconds later it can have a regular l.o.p. stock on it and 30 seconds later have a adjustable pistol grip stock on it!!! I was more referring to his comment about it being bought at walmart!!! Who cares where anyone buys their weapons from, I think we are all smart enough to shop around to find the best price!!!

Posted

Well that barrel is useless to anyone not on an entry team and you can already swap the stock on a 500 in a couple minutes. That thing is just appealing to the tacticool types, same reason 5.11 clothing sells so well. :lol:

Posted

Well that barrel is useless to anyone not on an entry team and you can already swap the stock on a 500 in a couple minutes. That thing is just appealing to the tacticool types, same reason 5.11 clothing sells so well. :lol:

True, and because most police departments issue 5.11 uniforms!!! My agency issues 5.11 BDU's!!! They are comfortable and they last!!!

Posted

Not talking about people who have a reason to own them. My point was that 500 and the 5.11 gear has hardcore mall ninja appeal. But I'm with you on walmart. Before the latest round of madness the one local to me stocked Colt 6920s. They might still but they don't last long.

Posted

Not talking about people who have a reason to own them. My point was that 500 and the 5.11 gear has hardcore mall ninja appeal. But I'm with you on walmart. Before the latest round of madness the one local to me stocked Colt 6920s. They might still but they don't last long.

Mine still does as well as the sig 556, the m&p 15 and 15-22 along with a bunch of other name brand stuff!!!

 

The only reason I mentioned my shotgun is because it is ready to go home defense right out of the box that you can put a light on without having to buy any adapters!!!

Posted

A shotgun would be my second purchase

 

 

Ryan

Posted

We have a sccy cpx2 9mm that stays by the bed. For a cheap handgun it's very reliable

 

Sent from my LG-D800 using Tapatalk

 

 

Posted

I would prefer to support an actual gun store. If you don't have much experience with guns, it's the only way to go. They can actually make a relevant recommendation for you, and like others have said sometimes "test drive" the gun. Not to mention support for parts, upgrades, training, etc down the road.

Posted

I picked the glocks 27 (.40) because its so popular. It makes finding a good holster very easy

 

Sent from my SCH-I535 using Tapatalk

Posted

I picked the glocks 27 (.40) because its so popular.

Nice choice.

I have the Glocks 22, 23, and 27 in .40 caliber.

Great round.

Seems like I read somewhere that the most common LEO sidearm is the Glock 22 in .40 SW.

  • 2 weeks later...
Posted

JMHO doesn't matter whether you have a $1000 or a $350 weapon in your hand. Bottom line is, can you hit what you are shooting at when it comes time to pulling the trigger? But, more importantly can you do it when SH? Sorry folks, I am a simple guy when it comes down to SHs....

Posted

OP: some good advice and some poor on this tread. If a true novice, have not used guns, the advice to use a good gun store for advice is good. Find a store that cares about your needs and abilities over just selling you what you think you want even if not right for you. Get training and shoot is good advice.

 

For a true novice, a wheel gun is a simple good start. Easy to operate. Easy to see if loaded etc... Once proficient with a revolver, then consider a semi...Ruger makes a reasonably priced revolver LCR or go a little bigger with some S&Ws. Throw on a laser grip sight and Federal Bulldog or similar ammo and good to go. 38+P and up will work. No need to shoot 357, esp as a novice. A simple pump shotgun as a second tool is good too but hard store if you want locked down protection.

 

If set on a semi, consider the 9mm as mentioned and look at Glocks. They, like a revolver require little maintenance and can lay there for years and will shoot. I finally cleaned my first glock for the first time after about six years and about 500-1,000 rounds. Never a malfunction. Have to clean my kimber on a regular bases, 200 rounds or less or ejection becomes dicey. IF buying a semi, learn about limp wrist/grip malfunctions.

 

Practice with what ever you get. And remember the order of actions. If you have a home intrusion, first get gun in hand THEN call 911. Also please join NRA or similar 2nd amendment support organization.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • I had an issue with a new 1985 Z-28 some years ago. The 4WDB's were less than adequate when purchased IMO.  I had taken it in for small warranty services and asked them on three occasions to check them. Each time is was "could not duplicate on the service ticket. The warranty ran out about a month after my last visit and had to take it back for warranty rework. I again complained about the brakes. Well, low and behold, this time they determined the rear calipers were sticking and gave me a quote to repair. They had records as well as O had receipts of each time complained about the brakes while still under warranty. My dad was a life long body shop owner and told me to keep my cool and tell them that I wanted to speak to the GM Regional District Manager. The service manager disappeared for a few minutes, came back and told me they would replace the calipers free of charge. 
    • Towing a 2022 Lance 24 ft travel trailer with our 2021 GMC Sierra 2500HD, gas.  Loaded, trailer is about 6,000 lb.  We get up to 10 mpg at 55 mpg, such as I-5.  Pleased with the combination.
    • I decided to give it a shot and see what sort of a gong show it would be to a pan drop themed oil change on my 2025 gas truck with the 10 speed. All indications I had seen so far was that there was no way that pan was coming out of there due to the cross over exhaust pipe not allowing enough clearance for the back end of the pan to duck out from under the valve body since it hangs lower than the pan to trans mount flange and certainly the filter does. I never touched any of the exhaust mount hardware at all, be that the engine manifolds to Y pipe, the bracket on the side of the transmission, or the two bolt flange further back behind the trans/transfer case. I put the truck up on four jack stands as there was no way I was going to struggle with that lack of clearance under the truck. The truck was cold as it had sat over night so all the trans fluid had drained to the pan, so I drained the bit of oil that would come out of the level check plug at the bottom near the front of the pan and put the plug back in to reduce the ensuing mess after that. Then took out all but one bolt front and rear and then pushed up on the pan and took out the remaining two bolts and then let the front of the pan tilt and spill out most of its contents into a drain pan. I then popped the pan gasket off its two locating nubs and kicked it a bit to the left side so it was no longer on the flange of the pan to get all the clearance I could and managed to get the pan slipped out of there by swinging the front of the pan to the right but keeping the rear part of the pan inline if not slightly to the left of its mounting flange area and lifting the front of the pan enough to keep the rear part of the pan low enough that allowed the pan to "JUST" slip out without forcing anything. I installed a new trans filter and seal and as per GM instructions on this site I torqued the two bolts to that 44 inch pound goal ( they take an 8 mm socket ) In reversing the pan procedure after I had cleaned up the pan both inside and out completely ( touching the outside of a dirty pan and dealing with installing a gasket at the same time would be a disaster ). First I slipped the pan into place and yes it took me a while as it won't go unless its slid in just at the right angles, then once the back of the pan was into the area of the flange mount, I went and got the gasket and then threaded that through the front of the pan and feeding it under the filter etc and finally working it onto the flange of the pan and lining up the two locating nubs to drop into the pan. Then lifted the pan up into place and get a couple of bolts started and check and make sure the gasket is where its supposed to be as the bolts were being put in. I never used any power tools as I don't have any of the whimsy little drive guns, I use what looks like a small screw driver handle with shank that has a 1/4 drive on the end of it and added an extension and those bolts use a 10 mm socket as some times power tools can bite a person if used on delicate parts ( torqued to 80 inch pounds ). Also should note as per rules around pulling the add plug out first, yes I cracked that loose with a 8 mm Allen bit socket on a 3/8 slim head ratchet as there isn't a lot of room to work with there either due to the exhaust on the right side of the trans.    I already had delco ULV oil on hand and of course the quart bottle pump wasn't made for those small cap threads so I had to use some other containers that the pump would fit and keep transferring oil over into them so a wasted exercise there but indeed the small pump did work just fine as ULV oil is thin and easy to pump in summer time weather. I put in 9.5 quarts as per prior minimum recommendation and yes that cut it pretty close as once I had the truck ( off the jack stands so its level ) and the trans oil up to 167f , about 6 ounces came out but a level kit or what have you could throw it off just enough that it wouldn't be enough oil so probably that 10 quarts is a good amount to put in so one doesn't have to add more oil as when its hot I sure wouldn't want to be adding oil so would have to let the exhaust cool. All I do for warming up the transmission is sit there with it in park and rev it to about 2500 rpm and it takes close to 20 minutes to get it up to that lower limit of 167f, weird how it will warm up more doing that then by driving it, I am not real keen on power braking the truck to get the temp up there and don't seem to have to either. By the way I only have 9000 miles on the truck so probably not a very good payback on doing it that soon and the magnets had such a minor thin layer of fines on them so that was good to see and the color of the oil was a darker red then new oil but still looked very good as it should and I've not done any towing with it so its been living a pretty easy life so far. The filter is made in such a way that its next to impossible to pull out the filter media but there certainly was some fines showing up there which makes sense give the trans having to break in.    I hadn't really planned on explaining this much of what I had done since there are various instruction videos kicking around or I think so, as the gist of my message as that by fluke or what have you, for some reason my truck has just enough clearance to slip the pan out from the trans. Of course there is no guarantee that other trucks like this in general will also allow the pan to be taken out without messing with the exhaust as I expect its probably a crap shoot if it will or won't, I was just happy to find out that mine would work and avoid all the other struggling and possibly damaging things in the process,     
    • Do you fellas think Fog Lamps would  be a good upgrade for our 2024 2500 HD Custom ? As you probably know it did not come with them ,  Would you put in GM Chevy parts ? Do they get wired up to the switch panel ( Upfitter or whatever the correct terminology is ) on the dash ? Thanks
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...