Jump to content

Pennsylvania State Trooper murdered

BlackZ71Silverado

By BlackZ71Silverado
in The Off-Topic Bar

Recommended Posts

BlackZ71Silverado Senior Enthusiast

BlackZ71Silverado

Posted
Posted

Figured I would post this while I finally have a few min. to spare.....

On Friday, a Pennsylvania State Trooper and a very close friend and brother, Cpl. Bryon Dickson was murdered and another shot in an ambush outside their barracks.

We have been searching tirelessly for the scumbag who murdered one trooper and injured another since this tragedy took place.

Forum members in NY, NJ, WV please keep your eyes out for this guy. He has known friends and associates in these states and could possibly be held up with one of them.

 

The cowardly suspect in the ambush is a 31 year old white male named ERIC FREIN, 6'1" tall with blue eyes and brown hair (suspect now believed to have mohawk style hair cut) approximately 165lbs. from Canadensis in Pennsylvania.

 

98d4a942189fc359284dc374366f2325.jpg

 

88af42b0c84750dc2e9948c13304e265.jpg

 

5d7843f294b625b4a68466d5fca200f8.jpg

 

 

If anybody happens to spot this individual, PLEASE call one of the numbers below :

 

Tip Line

1-866-326-7256

PA Crime Stoppers

1-800-472-8477

 

 

 

 

 

 

Sent from my crappy iPhone5S

using Tapatalk

99silveradoz71 Senior Enthusiast

99silveradoz71

Posted
Posted

The biggest reason I chew our guys out when they leave our back door to the station open claiming it's too hot inside. Hopefully someone puts the grabs on him soon.

galliher_nc Senior Enthusiast

galliher_nc

Posted
Posted

Very disturbing...amazing something like this would happen.. He will get what's coming to him

There is a special place in hell waiting for his kind.

  • 2 weeks later...
BlackZ71Silverado Senior Enthusiast

BlackZ71Silverado

Posted
  • Author
Posted

Making some progress. Discovered this dirt bags camp site today. Sleeping bag, food items, clothing, ammunition, explosives (pipe bombs). Won't be long now, he's got to be really low on supplies! His plan isn't working out all that great.

 

It's taking a while to get this guy in custody but top priority is, EVERYONE goes home to their families when shift is over.

 

 

Sent from my crappy iPhone5S

using Tapatalk

Chris Senior Enthusiast

Chris

Posted
Posted

Updates keep popping up on the "Flipboard" app on my phone

  • 4 weeks later...
BlackZ71Silverado Senior Enthusiast

BlackZ71Silverado

Posted
  • Author
Posted

FINALLY in custody...........The madness is over and it's time for this cowardly dirtbag to pay for what he has done. Yesterday was by far the best, most satisfying day on the job I have ever had. This guy gave up without issue and nobody else was injured, thankfully.

 

http://www.foxnews.com/us/2014/10/31/eric-frein-suspect-in-pennsylvania-trooper-ambush-taken-into-custody/

 

 

For all you other law enforcement officers on this forum, stay on point and watch your 6. You never know when these type of people will strike and it's sad to say, there is a very high chance of there being a "copycat" out there somewhere that wants his 5 min. of fame for attacking an officer. For some reason when something of this nature happens, there's always another looney tune out there who gets the idea to do the same thing.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • No F-bdy Bs
      SERCICE ESC message?

      By No F-bdy Bs · Posted

      Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • newdude
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By newdude · Posted

      This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      I was unaware of that, thanks for updating me.
    • newdude
      2026 TurboMax L3B 2.7L: AFM/DFM present/disablable? [2026 Silverado 1500WT: 4WD RC RB 2.7L]3GCNKAEK9TG345558

      By newdude · Posted

      Yes.  The 2.7 Turbomax has Active Fuel Management.  It is NOT the same as the V8s.  Totally different system.     Here is an article from GM when the 2.7 came out explaining the cylinder deactivation and the valve lift system.  Starts at the section called "SCS Valvetrain":   New Turbocharged 2.7L 4-Cylinder Engine Powers Full-Size Trucks – TechLink         This is an internet myth going around.  It was alleged that some 5.3s had this mystical 8th digit of the VIN as an "E" which somehow meant it had a new one year only 5.3 that didn't have DFM.  The writer of said article and the person that made the claim conveniently can't count because they posted the VIN.  The 8th digit was a "D" which meant its still the 5.3 with DFM.  The 9th digit of the VIN was an "E" and the 9th digit isn't the engine code.  At all.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...