Jump to content

Recommended Posts

Posted
1 hour ago, dalek77 said:

My service manager and service tech acknowledged the tick finally! They tried new fuel line and new style exhaust clamp, but still ticks. He said to bring it back until it's fixed, so that's good news. They're really trying.

Sent from my SM-G950U using Tapatalk
 

what did you say/show them? because I've replicated it without any concern from the tech

Posted (edited)
1 hour ago, dalek77 said:

My service manager and service tech acknowledged the tick finally! They tried new fuel line and new style exhaust clamp, but still ticks. He said to bring it back until it's fixed, so that's good news. They're really trying.

Sent from my SM-G950U using Tapatalk
 

Ask them to check anything to do with the electric power steering...the noise goes away when you turn the wheel (see my post yesterday). As 2016LTCC mentioned, it's probably putting pressure on wherever the metallic rattling noise is coming from.

 

Steering:

-ties rods/"rack & pinion" pack/steering mounts/bolts/steering shaft/steering shaft boot (which is snug against the break master cylinder - could be making noise)/front suspension & breaks/or anything the steering assembly is touching directly.

Edited by kport08
Posted

Need to Check the Vacuum Pump for ticking noises.

Often this is overlooked.

A Ticking Vaccum Pump = Ticking Time Bomb! :fart:

Posted
what did you say/show them? because I've replicated it without any concern from the tech
I wrote a long survey to the last maintenace and gave 0 stars. It was very polite and manager immediately called me next day. He rode in truck with me for 1 hour. He could easily replicate it by letting off gas and barely pushing pedal. Tick tick tick. He said he will work it until fixed. I'm gonna try the procedure you guys did before I bring it in next week.l and then show him if it works on mine.

Sent from my SM-G950U using Tapatalk

Posted
Ask them to check anything to do with the electric power steering...the noise goes away when you turn the wheel (see my post yesterday). As 2016LTCC mentioned, it's probably putting pressure on wherever the metallic rattling noise is coming from.
 
Steering:
-ties rods/"rack & pinion" pack/steering mounts/bolts/steering shaft/steering shaft boot (which is snug against the break master cylinder - could be making noise)/front suspension & breaks/or anything the steering assembly is touching directly.
Yep, let me see if I can replicate first.

Sent from my SM-G950U using Tapatalk

Posted

Ticking sound is common with the 5.3’s.


Sent from my iPhone using Tapatalk

Posted

So dropped off the truck this morning. Mentioned the noise and explained that there was some play in the water pump pulley.

 

Just got a call that the play is normal. No sound detected on a test drive.

Posted
I had a 2017 6.2L - same tick...
 
 


My 18 6.2 has zero ticking


Sent from my iPhone using Tapatalk
Posted
3 hours ago, Sierra Dan said:

Need to Check the Vacuum Pump for ticking noises.

Often this is overlooked.

A Ticking Vaccum Pump = Ticking Time Bomb! :fart:

Replaced mine this week had no effect. 

Posted
2 hours ago, Jonty711 said:

So dropped off the truck this morning. Mentioned the noise and explained that there was some play in the water pump pulley.

 

Just got a call that the play is normal. No sound detected on a test drive.

And on the drive home it ticked like a muther under load. Disappeared after I turned a corner though. Both right and left turns. Came back in between the turns though.

Posted
1 hour ago, Sierra Dan said:

Was it a hard job?

Jobs not hard but then again I’ve been doing this work for many years. 150 dollar gamble on the ticking noise and the house won again. I just read a review on the 2019 Silverado and apparently the ride and interior haven’t improved so it’s safe to assume other issues may follow. I understand the grass may not be greener on the other side but when I start to compare gm to ford or ram it’s like nothing about my truck is a winner other than the looks. I think Chevy went backwards with the new model making it look and ride like a 2014 tundra. 

Posted

Fellas I’m done ranting about these pos gm trucks. If I wasn’t in the middle of a move and new home purchase I’d be rid of this truck. I’d like to find a fix to this ticking noise and share with all of you but at this point on top of the ride, interior, axles, and leaf springs... sorry I mean the whole truck Ill be trading for the first good ford or ram deal I find. Cheers 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • You need a better code reader/scanner.  You are missing codes.  Did the dealer give you a copy of the SAVI scan from that visit?     If the fluid hasn't been changed, change it.  Shudder will likely go away.  
    • TLDR to my other post...   Hard. Pass.  Too many what ifs.     Are you set on a 3.0 Duramax?  Have you considered anything not GM just in case?  If you don't have to have a pickup, lots of other options for $27,000 out there.   
    • I see some red flags.   - No mention in the Carfax if the oil pump belt was changed.  LM2s had a 150,000mi service interval, and its got 164,245mi on it.  So right out the gate it needs about $3000-3500 for that to be done before driving it another 150,000mi.  Belt is at the rear of the engine.     - If something happens to the transmission valve body, the special coverage is expired by mileage.  That will likely be an out of pocket expense, with zero or near zero GM participation if something happened even though its in by time.   - 2020 LM2s seem to need timing chains after 80,000mi at some point.  They fixed this end of 2020/starting 2021 model year engines.  They will usually set a P0016 I think?  There is another $8000-10,000 if it needs a chain.  The main chain is at the back, secondary at the front so the pump belt would be done at the same time if it needed chains.     - Long oil change intervals.  7,000-8,000mi on average, probably close to 0% or perhaps to or beyond 0% on the OLM.  Lots of them not at the dealer which makes me wonder how much of the oil ran through that truck was the proper Dexos D rated 0w20 oil and not just gas engine 0w20, which is not the same at all.     - Long fuel filter changes, again likely taking the fuel filter life to 0% or more.  First one went 28,603, second was done 43,094 miles later at 71,697, from there another 46,452mi to 118,149mi, and then the most recent one 37,026mi later at 155,175mi.  So counting its original fuel filter, its had only 4 fuel filters on it.  No bueno IMO.         Good news?    - It has had only two warranty trips to the dealer.  The first free service (end of December 2020 on the Carfax), and the transmission reprogram recall (end of August 2025 on the Carfax).     - Truck did a LOT of moving, so that might explain the lack of emissions related repairs like bad NOX sensors, bad exhaust temp sensors, bad glow plugs, etc.         The "emissions system checked" could just be how something was flagged for Carfax.  GM dealers have to do SAVI reports for warranty repair orders so they scan the truck.  So its possible that is there for that?  
    • Thank you, @Z45!   NOTE - No all repair shop/Dealers reports to Carfax   That is my main concern.  The CARFAX looks way too clean for a 6 year old anything with 164,245 miles.  Even something known for reliability (like many Toyotas) typically has a lot more replaced, like a Nav screen, interior trim, shock/strut, or brake pads.  And surely the last set of tires (installed at ~58k miles) would be bald unless those were all highway miles.   I'm tempted to pay a local dealer to look up the VIN, but am not sure if that will be worthwhile.  Last time I did this, it was 100% useless, and I felt scammed - they noted the bumper was replaced years ago and that's it.  A 5-year old could spot the accident damage, even though nothing was on the CARFAX.   After giving the dealer a call, the truck may have a hard shift, but they have to verify with their mechanic if that's even a concern.  And I've test driven about a dozen of these now, many near Chicago, and half the trucks shift hard/odd at all throttle positions.  The ones with aftermarket lifts/larger tires shift terrible, and 3 stock trucks shifted so violently I thought the transmission valve body was going out.   At this point I'm conflicted, as I need a vehicle, and am coming up short locally.  Northern trucks in this price range tend to have either multiple owners, a lot of mods (lifts/oversized tires without re-gearing), and are generally in rougher shape.   If this truck showed up in your neighborhood for $27k and you had to purchase it sight-unseen, with the possibility of needing a 10L80 rebuild, torque converter, or rear end - would you do it?  I'm convinced most of the 10L80 trucks I test drove are broken, they can't all shift so bad, with massive flares/slipping/lurching and mis-matched downshifts like a teen driver learning stick.
    • From the spy shots, the front end does look like it's borrowing some styling cues from the Canyon. I'm more interested in the powertrain news than the screens though. If the 3.0 diesel survives into the next generation, that alone will keep a lot of current owners interested.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...