Jump to content

Recommended Posts

Posted

 

I ran them on my 2007.5 - They do come with the adapters - just pick the one for GM - I have emailed PIAA to confirm 2017 fitment........

Please let us know what they say.

 

Thanks!

 

 

Sent from my iPhone using Tapatalk

Posted

One thing to consider with the wipers is when you buy a truck off the lot, think that the wipers have been sitting in the elements not doing anything since its build, could be months, just drying out. When we replace wipers, they're used all the time with washer fluid, in the rain, multiple times to keep them hydrated. Its not that the ones that came on the truck are garbage, it could just be that the truck has been sitting and they've dried out. Would happen on any vehicle that sits for months and not used the wipers. I run the OEM ones on my truck, first set lasted 2 years, replaced with OEM and so far so good.

  • Like 1
Posted

Rain x washer fluid is great to maintain the repellant coating, but nothing beats a hand application of the real stuff

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted

I recently replaced mine with Bosch Icon OE and was really impressed. Much better than the factory wipers

Posted

The left wiper streaks all the time on my '17 All-Terrain. Only have 4500 kms on it. I'll be replacing them STAT!!!

 

 

Sent from my iPhone using Tapatalk

 

I would tell your dealer you want them replaced. Wiper blades are not officially covered by the B2B warranty but at under 3000 miles you shouldn't be having problems with them yet.

Posted

 

I would tell your dealer you want them replaced. Wiper blades are not officially covered by the B2B warranty but at under 3000 miles you shouldn't be having problems with them yet.

 

I'll let them know when I bring it in for the first service.

 

Thanks for the advice.

Posted

I have had good luck with PIAA Silicone. Mark me down as a fanboy for Aquapel, it lasts 3 or 4 times as long as Rain X and doesn't smear when it wears out. With a good coat of Aquapel on your windshield you can get by with just about any wiper blade.

Posted

32000 miles on OEM blades. No problems at all. I do use RainX applied and their fluid,

Posted (edited)

Please let us know what they say.

 

Thanks!

 

 

Sent from my iPhone using Tapatalk

 

 

PIAA has confirmed the part number is still # 97055:

 

>

Thank you for contacting us. We do make a wiper for your 2017 Silverado 1500 truck. It uses our Si-Tech blades part number 97055. You can find them in the link below.

 

https://www.piaa.com/store/p/121-22-550Mm-Si-Tech-Silicone-Wiper-Blade.aspx

 

 

Jamison Niebuhr

PIAA Corporation, USA

503-489-6616

The Road to better Visibility starts with PIAA

Visit us at www.piaa.com

Edited by Krusty
  • Like 1
Posted (edited)

 

 

 

 

PIAA has confirmed the part number is still # 97055:

 

>

Thank you for contacting us. We do make a wiper for your 2017 Silverado 1500 truck. It uses our Si-Tech blades part number 97055. You can find them in the link below.

 

https://www.piaa.com/store/p/121-22-550Mm-Si-Tech-Silicone-Wiper-Blade.aspx

 

 

Jamison Niebuhr

PIAA Corporation, USA

503-489-6616

The Road to better Visibility starts with PIAA

Visit us at www.piaa.com

 

 

 

Thanks for this!!

Edited by KA0S
Posted

Wiper blades on my sucked the first time I used them. I recommend the Bosch Icon as well, but dang they're $50 for a pair.

Posted

Wiper blades on my sucked the first time I used them. I recommend the Bosch Icon as well, but dang they're $50 for a pair.

Try Amazon or Walmart. I got them from Amazon for $34 with tax
  • Like 2
Posted

Try Amazon or Walmart. I got them from Amazon for $34 with tax

Never thought about Amazon, and I'm a Prime member! thanks!

Posted

Never thought about Amazon, and I'm a Prime member! thanks!

Before you buy anything, always look at amazon. It saves me a lot of money every year.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
    • I had an alternator fail that was shorted internally in such a direct fashion in addition to the larger gauge cables that it appeared like a VERY dead battery. Granted I think the car did power up, it definitely wouldn't start.   Rodent damage to wiring?
    • ... I don't think he could.
    • Using experience to justify bad advice is lazy and typical of someone incapable of articulating why their advice is prudent.    This immediately sets off the BS alert and the advice that followed certainly qualified.   Asking an idiot for help getting out of dumb situations because he is an expert... at getting himself into dumb situations.   Unless I've been living in an alternate universe - the first thing everyone does when getting into a sticky situation is shift to a higher gear 🤨.   Of course not, the torque multiplication, mechanical advantage and finer control typically afforded by the lower gear is far better suited for this scenario.   There ARE scenarios where a higher gear MIGHT be appropriate determined more by the drivers ability to control EXCESSIVE wheel spin versus applying torque to the ground.
    • I'm not sure I agree with "extreme" low speed, high torque sentiment here with regards to the prescribed use of low range. How about...whenever it's needed?   A 2.72:1 transfer case and whatever differential gears these Silverados have (3.42's, maybe?) aren't producing "extremely" low crawl speeds. Or insanely high torque multiplication. Even with the 1st gear in these newer transmissions. But it does provide mechanical advantage and potentially better control at slower speeds. And with extra weight or towing, I think it adds mechanical sympathy for the truck as well.   Plus, traction control and the other assists generally turn off when you shift into low range. Those aren't needed here, they'll work against you if you need wheel spin. In high range you'll need to figure out how to turn off the various modes those assists provide. Depending on the vehicle, those things don't all automatically turn off or turn completely off.   While I agree that a farmer might have some great practical experience, a recommendation to "always" using one gear isn't very informed advice. If the farmer had said WHY and could explain the physics behind his prescriptive "always" I'd definitely listen. The way he's described here makes it sounds like he could either be uninformed or is telling everyone what worked for him, not necessarily that there could be a more advantageous way about things.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...