Jump to content

Wheels; such a hard decision

geswek

By geswek
in Modifications & Accessories

Recommended Posts

geswek Enthusiast

geswek

Posted
Posted

I finally had someone contact me after months of an ad being posted. I was wanting to trade an All Terrain owner for their 20s. Now someone has popped up and I’m conflicted! I’m curious on general populations thoughts.

 

I will say I wanted those wheels from day 1 when I saw them. I just didn’t want to pay $1200+ for take offs.

 

Here is forum member truck which is first I’ve seen that did it.

 

e6fc0cac91e8bf50ad1d3f7c86d2a93c.jpg

 

Here is mine currently.

 

0edbf1fe110eb3ab5ee76acb3c30a1ed.jpg

 

The person does have KO2 so neither of us would need to change the tires. Which kinda makes deal pretty solid.

 

 

Sent from my iPhone using Tapatalk

jimmyboy8301 Senior Enthusiast

jimmyboy8301

Posted
Posted

The OEMs look better


2017 Chevy Silverado LTZ Z71 6.2L
4.5" Zone
22x10 American Force Grips
33x12.5 Nitto Ridge Grapplers
Instagram @wildchevys

aseibel Senior Enthusiast

aseibel

Posted
Posted

I like the top photo wheels way better. If you can trade for those straight up, I'd be all over it.

amxguy1970 Senior Enthusiast

amxguy1970

Posted
Posted

Pretty simple answer to your question, do what you like...

 

I personally never would go up in rim size, the smaller then better on a truck but if it doesn't leave the pavement and you don't mind a rougher ride the OEM's do look a little better.

 

Tyler

geswek Enthusiast

geswek

Posted
  • Author
Posted
Just now, Skeeter McSkeet said:

Get the Grown Man’s Chevy wheels, they’re killer.


Sent from my iPhone using Tapatalk

 

HAHA; they're on a Sierra so I'll have to get caps that have Chevy emblem and not GMC logo.

 

:D

Skeeter McSkeet Senior Enthusiast

Skeeter McSkeet

Posted
Posted

Shoot man that should be an easy swap. I’ve got the SLT version of those wheels, I think it should pop out?


Sent from my iPhone using Tapatalk

geswek Enthusiast

geswek

Posted
  • Author
Posted
Just now, Skeeter McSkeet said:

Shoot man that should be an easy swap. I’ve got the SLT version of those wheels, I think it should pop out?


Sent from my iPhone using Tapatalk

Yeah they do; they're same size as Chevy caps on other wheels.

 

Guy who is top photo did that; he swapped his caps.

geswek Enthusiast

geswek

Posted
  • Author
Posted
Just now, Lgetz said:

All Terrain wheels all the way though I may be somewhat biased.?

20170830_182957.jpg

LMAO; when I saw you pop up in my Tapa I immediately thought "Leo Gets".

Lgetz Senior Enthusiast

Lgetz

Posted
Posted

Yep thats my first name.??  Back in the middle school days bunch of friends started with the Leo Getz and it never went away.??

geswek Enthusiast

geswek

Posted
  • Author
Posted
Just now, Lgetz said:

Yep thats my first name.??  Back in the middle school days bunch of friends started with the Leo Getz and it never went away.??

HAHA; I don't mean to laugh but I so see that!

 

My name is Storm Walker and I've had star wars jokes my whole life.

Lgetz Senior Enthusiast

Lgetz

Posted
Posted

No worries sir??

The "Brings/Brought the Storm" also gets plenty of play with you as well.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      "Teardown" is complete. Head surfaces are clean and ready, new intake is prepped and ready. Coolant drained and water pump is removed, radiator is removed, new hoses and pump are ready.   The replacement intake is also from a '95 (with I think 260k, the odometer said). Noticeably less pitting where it covers the rear coolant passages. I'm not sure if that's a tribute to more frequent use, more frequent coolant changes/upkeep, or if the intake was machined at some point. But it appears I found a good one.   My coolant hoses were original, and the lower hose still retained the factory spring inside. It's not really rusty, but it's got deposits all over it. Unsure if I should re-install it (will thoroughly clean it first). Someone said hose technology has gotten better since 1995 (has it?) and I don't need the spring. I think modern EPDM is what made those hoses last from 1995-2026, so it's a question of how much suction can the water pump really pull, and will it collapse the hose without a spring?   I'm stopped and waiting for parts, however.   When I first brought the truck home, the fan was intermittently hitting the radiator shroud. I could see someone had monkeyed with the shroud (put a bunch of cardboard as a spacer between the upper/lower shroud halves. Someone said the motor mounts have likely failed and the engine has sagged. I wasn't sure I believed that. The engine is really solid in its mounts: To remove the old intake I *just* nearly permanently welded to the heads with freshly cured RTV and gasket snot two weeks ago, I literally had to use the arms on my lift and a chain with a bolt attached to the intake to pull it loose. It almost picked the front of the truck off the ground before ....scuuuuuuuuuuup.... I could actually hear the gaskets tearing and it broke loose and the whole truck settled back down. Motor barely moved.   SO, those parts I'm waiting on... The lower radiator mounts/bushings had completely failed. The radiator needs to be insulated from the rad support, and the bushings help the rad stand at the correct height. The plastic "baffle" was also destroyed at some point. Someone had attached the shroud to it incorrectly, overlapping a joint that should have been underlapped, creating another suspect issue potentially causing things to hit the fan. Broken tabs, side is busted off, and it's perma-formed/bent where it was jimmied incorrectly.   The baffle? Unobtainum. Long since discontinued from GM, of course. Aftermarket/capa/chinese? Also unobtanium. In GM's infinite wisdom, it appears there are at least two different variations whether the Blazer is 2 or 4 door, and I can't yet tell if they shared the same part with the S-pickups. Plan B, if I can't find a viable used one, will be to create a bracket to re-assemble the critical joint I need to seal a gap with the shroud. But that will bug me, it won't be...perfect.   The water pump bolts appear to have been installed with...plumber's putty. I guess, sure, if it works...? I've found a few "backyard fixes" like that. Someone's been here before....   If I can't find someone to jam bamboo under my fingernails to fill my free time this week I think I'll install the driver's power window motor and replace the rear door speaker that's inop. I've got a genuine GM "9.5" ohm working replacement. Why GM used a non-standard resistance....nevermind. Of course they did, you can get more sound from a cheap factory amp that way.   And the saga goes on...
    • glenn27
      Different requirements for oil filters?

      By glenn27 · Posted

      // Thank you, also for your  response. More information is always good. This 2013 GMC is most likely my 'forever truck"-I'm 77 and retired...and truck only has 42K on it-very clean-so I try to keep it that way.  Tks again for your  response- glenn
    • smooth68
      Alternate wiring for Kicker sub with Bose system. (DO THIS)

      By smooth68 · Posted

      I started my install this weekend. Everything was pretty straight forward but I ran into one issue with running power through the firewall. The nipple grommet on my High Country already has a small harness running through it - has anyone else ran into this issue? And on the engine bay side, does the wire basically just penetrate the factory wiring boot? I did this on my '22 Trail Boss and it seems much easier but thats been a few years. My other thought would be possibly drilling a new hole adding a rubber grommet just to the lower left of the factory hole. Thoughts?   Has anyone used a T-harness off the Bose amp and obtained power from there? It seems a little odd that such a small amp needs 3 power leads
    • glenn27
      Different requirements for oil filters?

      By glenn27 · Posted

      ///// Ok--Thanks for that info--I could not find yesterday when I looked for the specs on that NAPA filter what I wanted. Their website is not very user friendly. I buy all teh filters for  our three vehicles once or twice a year. Have always run NAPA Gold on everything I own....I buy it thru my Son's account for his business-which he has a Heavy Equipment repair shop-one reason he uses NAPA so much-they have such a full line of coverage for just about anything/anywhere- He gets s  good discount because of volume bought. Anyway-Thank you -Sir for your response.   glenn
    • PhilB
      No 12v outlets in 2026 gmc Sierra

      By PhilB · Posted

      It is possible to add your own 12v outlet to your truck.  Check out this video:   I verified via GM Upfitters that pin 31 is the same on the 1500 trucks.  The wire is GM part number 84779405.   You can get the GM 12v outlet from Amazon  https://www.amazon.com/Genuine-Accessory-Receptacle-25774623-13549530/dp/B0F1H9YRGF EWAY 12 Volt Power Adapter for GM   https://www.amazon.com/EWAY-Chevrolet-Silverado-Cigarette-Ignition/dp/B0915RRW6Q/ref=sr_1_1?   I just haven't figured out a good place to put the 12v outlet in my truck.   Some people are getting USB-C to 12V adapters  https://www.amazon.com/WYMECT-Cigarette-Lighter-Socket-Adapter/dp/B0F87WNQKB/ref=sr_1_1_sspa? Not sure if they provide the correct amperage that a device like a tire inflator would need.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...