Jump to content

Standard bed crew cab leveled or lifted????

Gabe Bunn
 Share

Recommended Posts

Gabe Bunn Enthusiast

Gabe Bunn

Posted
Posted

Does ANYONE have pics of a standard bed, not the short bed, crew cabs with a leveling kit or lift? Looking to buy a standard bed crew and level it or put a 3"-4" lift on it with 33"-35" tires. Or possibly 295's. Thanks. 

E-rich1210 Enthusiast

E-rich1210

Posted
Posted

I just put a 2" Rough Country leveling kit on my 18 1500 crew cab standard box last weekend. I really like the way it sits now. I haven't noticed any difference in fuel mileage, I may remove the bottom skirt on the front of the truck to have a better look as  well. This has the stock 18" rims and 265-65 wheels on it from the Z71 package for now. Not quite as big of a lift as your talking about, but I really like the leveled look of the truck.

20180504_115538.jpg

20180504_115549.jpg

Jon A Senior Enthusiast

Jon A

Posted
Posted (edited)

I haven't posted many pics in a while, so since you're asking....

 

Stock:

 

 

 

IMG_20140220_095406_684.jpg

 

IMG_20140220_095501_824.jpg

 

 

Leveled 2" Front, 1" Rear with 34" Tires:

 

PICT0087.JPG

 

PICT0078.JPG

 

PICT0121.JPG

 

Leveled ~2.5" Front, 2" Rear with 35" Tires:

 

DSC_2025.jpg

 

DSC_2029.jpg

 

 

Lifted 4.5" front, 3.5" rear with 35" Tires:

 

IMAG1814.jpg

 

 

IMAG1753.jpg

 

DSC_2913.jpg

 

DSC_2915.jpg

 

DSC_2920.jpg

 

 

I've since replaced the stock tube steps, gained a bunch of ground clearance and makes it look higher:

 

IMAG2015.jpg

 

 

 

Edited by Jon A
  • Like 1
Sean3565 Enthusiast

Sean3565

Posted
Posted

Rough Country level. Looks like Crimson Red Tintcoat is a popular color!

 

 

Leveled1.jpg

  • 3 years later...
Zack10 New Member

Zack10

Posted
Posted
On 5/4/2018 at 7:41 PM, Jon A said:

I haven't posted many pics in a while, so since you're asking....

 

Stock:

 

 

 

http://www.jonaadland.com/GMC/RealPics/IMG_20140220_095406_684.jpg

 

http://www.jonaadland.com/GMC/RealPics/IMG_20140220_095501_824.jpg

 

 

Leveled 2" Front, 1" Rear with 34" Tires:

 

http://www.jonaadland.com/GMC/PICT0087.JPG

 

http://www.jonaadland.com/GMC/PICT0078.JPG

 

http://www.jonaadland.com/GMC/ShinyCap/PICT0121.JPG

 

Leveled ~2.5" Front, 2" Rear with 35" Tires:

 

http://www.jonaadland.com/GMC/Mods/RidgeGrapplers/DSC_2025.jpg

 

http://www.jonaadland.com/GMC/Mods/RidgeGrapplers/DSC_2029.jpg

 

 

Lifted 4.5" front, 3.5" rear with 35" Tires:

 

http://www.jonaadland.com/GMC/Mods/BDS/IMAG1814.jpg

 

 

http://www.jonaadland.com/GMC/Mods/BDS/IMAG1753.jpg

 

http://www.jonaadland.com/GMC/Mods/BDS/DSC_2913.jpg

 

http://www.jonaadland.com/GMC/Mods/BDS/DSC_2915.jpg

 

http://www.jonaadland.com/GMC/Mods/BDS/DSC_2920.jpg

 

 

I've since replaced the stock tube steps, gained a bunch of ground clearance and makes it look higher:

 

http://www.jonaadland.com/GMC/Mods/BDS/IMAG2015.jpg

 

 

 

What level did u get for the 2.5 in the front and 2 in the rear

  • 2 weeks later...
CTTMFP New Member

CTTMFP

Posted
Posted

2In Rough Country leveling kit on Factory rims with 275/60R20 BFG KO2s

Screenshot_20210919-194022_Gallery.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...