Jump to content

Recommended Posts

Posted

34-36lbs seems to be the sweet spot.

My tires were set at 42 when I first purchased.

The first "Mod" I did to my Sierra was airing down within the first hour she came home. :thumbs:

  • 5 months later...
Posted

I’d agree that my truck is bouncy and doesn’t ride or handle as well as my 2016 Ram. When the ram shocks needed replacement I put Bilstein 4600s on and it was even better. I’m currently waiting on aftermarket shocks to see if that’ll help this truck. Highway is fine, but any unperfect road is torture and I’m REALLY hoping some bilsteins will calm this bouncy boat down. For all the hype I’m pretty unhappy with my 19 RST. 

Posted
2 hours ago, JimTX said:

I’d agree that my truck is bouncy and doesn’t ride or handle as well as my 2016 Ram. When the ram shocks needed replacement I put Bilstein 4600s on and it was even better. I’m currently waiting on aftermarket shocks to see if that’ll help this truck. Highway is fine, but any unperfect road is torture and I’m REALLY hoping some bilsteins will calm this bouncy boat down. For all the hype I’m pretty unhappy with my 19 RST. 

That's to be expected. Your RST probably has hundreds of pounds more payload capacity than your Ram did. Ram's coil springs suspensions have always had a softer ride. They just don't have nearly as high of a payload capacity on average because of it. A 7100 lb GVWR truck with leaf springs, especially one with Ranchos, will have a firm ride.

 

If you have 20" wheels, that will affect the ride substantially. If the tires are over-inflated, that will also have an effect on ride. The twin-tube Rancho shocks suck, so at a minimum, you should look into shocks. I'm planning on at least going with Bilsteins 4600's when they're available.

Posted
1 hour ago, HondaHawkGT said:

That's to be expected. Your RST probably has hundreds of pounds more payload capacity than your Ram did. Ram's coil springs suspensions have always had a softer ride. They just don't have nearly as high of a payload capacity on average because of it. A 7100 lb GVWR truck with leaf springs, especially one with Ranchos, will have a firm ride.

 

If you have 20" wheels, that will affect the ride substantially. If the tires are over-inflated, that will also have an effect on ride. The twin-tube Rancho shocks suck, so at a minimum, you should look into shocks. I'm planning on at least going with Bilsteins 4600's when they're available.

I’ve said this in a previous post but my ram also could tow more than my RST. I think ram can do 99 percent of what people use a half ton truck for. The “it’s a truck it’s supposed to ride rough” argument can be solved by looking at rams tow and payload numbers and riding in one of their trucks. Even the old generation. The new ones even better. 

  • Like 1
Posted
1 hour ago, JimTX said:

I’ve said this in a previous post but my ram also could tow more than my RST. I think ram can do 99 percent of what people use a half ton truck for. The “it’s a truck it’s supposed to ride rough” argument can be solved by looking at rams tow and payload numbers and riding in one of their trucks. Even the old generation. The new ones even better. 

Most new Ram 1500's I'm seeing have such low payload ratings it's laughable. Very rarely do they have enough payload rating to handle decent tongue weight while also having people and cargo in the truck at the same time. Some have less payload capacity than a Chevy Colorado.

Posted

As I have posted before. The ride in my RST non Z71 is garbage. I let the pressure down on the factory 18's to 35#s all around. That helped a little. When this truck starts bouncing it goes to full extension on the shocks. When I hit expansions in the road where the pavement lifts. The truck will almost lose control. You have to be holding on to the steering wheel when it happens or risk losing control. When I hit stutter bumps on the road the tires will bounce across the road and chirp as they skip.

 

I am not buying the payload argument as to why this truck rides the way it does. I am very unhappy with the way this 2019 rides. It was without a doubt a step in the wrong direction for GM. Maybe it has something to do with the 2 leaf springs in the rear doing all the work.

  • 2 weeks later...
Posted (edited)

Just bought a 2019 LTZ Z71, i wish i would have read this before i bought it. The truck rides terrible,bouncing all over the road, feels very unstable at high speed to the point that i'm going to lose control. At slower speed going over bumps the steering wheel shakes so bad i just can't believe this is a brand new truck. I traded my 2017 LTZ that road perfect and smooth for this piece of shit. I want another truck,i've only had it 6 days and i can't stand the junk. Anyone have any suggestions on what to do ? 

Edited by PDYoung
Posted
13 hours ago, PDYoung said:

Just bought a 2019 LTZ Z71, i wish i would have read this before i bought it. The truck rides terrible,bouncing all over the road, feels very unstable at high speed to the point that i'm going to lose control. At slower speed going over bumps the steering wheel shakes so bad i just can't believe this is a brand new truck. I traded my 2017 LTZ that road perfect and smooth for this piece of shit. I want another truck,i've only had it 6 days and i can't stand the junk. Anyone have any suggestions on what to do ? 

Wow.  Did it not do that during your test drive?

  • Like 1
Posted

I can say that unfortunately I did not test drive mine long enough. I did not realize that I needed to put more miles on it then I did at the Dealership. Plus can any brand of new vehicle of any type give a true representation of it characteristics in 5 miles or less?

Posted

From what was described above I believe so.

Because on that 5-10 mile test drive your going to hit bumps, your going to get her up to a good speed and cruise. I know I did.

But, mine just does not ride nearly as bad as what has been described. 

And, I'm very sorry for you guys, that trucks do.

I know its gotta suck.  

Posted
19 hours ago, PDYoung said:

Anyone have any suggestions on what to do ? 

Welcome to the club. Most of us are waiting for Bilstein to release a replacement for the Ranchos. They really are bad shocks. 

Posted (edited)

No i didn't notice the shitty ride on my brief test drive. I was just thinking since this was an all new  designed truck, it would ride really nice. It's not just the Z71 optioned truck with it's Z71 Rancho Mono tube suspension that is  the problem ?  Do all trim levels of this new silverado ride like this ? I was thinking about replacing all the shocks with Denali shocks or a non Z71  GM double tube shock for now, at the dealers cost, until the aftermarket comes out with something. The dealership is hounding me on filling out their survey. If i don't get a smooth, non bouncy riding truck, the dealership and GM are going to get blasted on their survey.My truck is at the dealer now having a dent removed that i didn't see until i got it home and the paint on the hood cleared of some spotty fallout. They gave me a 2019 LD Silverado that is smooth as silk and doesn't bounce. This truck is the out going design. Does anyones steering wheel shake like crazy going over bumps in the road in their new T1 trucks. I can feel every bump through the steering wheel, very bad on bumpy roads. Same road with loaner truck, steering wheel feels great. WTF is going on ? 

Edited by PDYoung
Had more thoughts i needed to add
Posted

Maybe not Denali shocks, i just read they have Magnaride similar to what  my 2011 CTS-V has

Posted

I will say mine "loosened up" over time. When I first got it the ride was very stiff. After a couple of thousand miles it seemed to ride better. I came from a Avalanche so the ride difference was very noticable at first.

  • 2 months later...
Posted

Did  Anyone find the fix for the bouncy ride on the 2019 Silverado high country?  This truck is so bad it sometimes go sideways on the road. Only had this truck for 2 months. 
Please respond to me by email 

thanks 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Maybe, but it seems he is the only one that has backed up data to prove what he is stating. I think he is doing this more because he enjoys it and wants to get the information out to us. He's got the knowledge and access to the proper equipment and having the funds doesn't hurt.  I would love to do what he is doing and would do it if and when I hit the Powerball.  I'm not a Tribologist by any means but love to learn what I can.   I would bet there would be doubting people out there if a completely independent lab with high quality work and highly respected in the automotive industry, put out information like this.  The world can't be pleased, one just has to take the information that they are given, do more of their own research to find actual lab data to back up what they are trying to figure/find out.  Most don't bother, they just want to believe what they first see.     I don't have the minimax but my 6.2 in my 2019 Silverado with 64k miles shows excellent UOA results with 0w-20 and for my own purposes 5w-20.  Since not much of a change using 5w. I liked the data sheet information on the SS 5w-20 and figured I would give it a try.  Still the same viscosity at 100℃.   In the end we all just do what makes us happy, life is too short to get upset over trivial social media.   On a side note, I do feel GM has dropped the ball and just cares about the bottom dollar and not quality anymore.  "Like a Rock" has been long gone.  Seems "Built Ford Tough" has as well.
    • Better than stock but that's like putting lipstick on a pig
    • Hello, my 3 month old Sierra Elevation wont recognize a trailer with electric brakes? All the lights work correctly, but no power to the brakes?   This is the factory installed brake controller. If you manually push the knob, the display shows the power % but does not light up like my 2022 silverado.   I have an appointment with the dealer, but was checking to see if anyone else has seen this issue.    Thanks, 
    • Been using SS 0w-20 from new, but wanted to change to the 5w-20 because I liked the data on the data sheet, to me it seems like a little better product. But as you can see, not much difference. This is also with running a mix of 10 gallons E85 to a tank topped with 93. It isn't a flex fuel vehicle so any higher I get a CEL for running lean on both banks. Yes my mileage takes a hit. Instead of 20 mpg I normally get on trips I get 17mpg. This is also using EaO17 filter.  What is amazing is I have the AMSOIL cone filter on it since I have the GM Performance intake installed and that air filter has 44k miles on it.  I just take it out and shop vac it off once a year.  I use the upholstery tool on my shop vac.  Works well.   
    • So, lot's of googling and reading, and a trial fit found, that indeed they hit the newer fatter caliper. I did some re-testing today, and found just 3/16" worth of washers was enough for the wheel to spin freely. I added 2 more on each, and again it spun freely. Tested lock to lock with the 4 washers, about 5/16" not quite the 3/8" Im considering, but pretty close. No issues. I've been looking at the BORA .375" spacers and using extended lugnuts to get back lost thread due to the spacer. All the ET lugs I've seen are all .33" reach inside the wheel lug holes. For those that don't like spacers or think they're unsafe, I think it depends on what type of spacers you're using and making sure you get good quality hubcentric ones, and if you're using bolt on ones, regular mainenance, checking the spacer lugs. Not wanting or needing that much spread. Looking for the minimum that will let me run these rims and tires.  it does look to stick out a little, but I really want put these on. and use the stock all-terrains in the winter. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...