Jump to content

Recommended Posts

Posted (edited)
On 1/13/2019 at 6:08 AM, bigman32hockey said:

My brand new '18 Redline Editon developed "the shudder" at around 450 miles.  Mine seems to shudder worst when around 50 mph and constant speed and again between 65-70 mph, where it will do it all the time.  I went to my dealer and was told GM will not reimburse them when they install new torque converters for this issue.  Apparently GM has issued a document (Document ID: 4536930) which says GM engineering has proven the problem is not caused by the torque converter.  The only fix my dealer can offer is the transmission fluid flush and fill with Mobil 1 synthetic.  I know this won't fix the shudder problem, but at this point I have to go through the steps GM offers.  I honestly cannot believe I am having this problem.  I had a '17 Midnight Edition that I traded up from (wanted the 6.2L engine and a few other options).  That truck ran perfectly.  Never had any problems with it.  Less than 1,000 miles on the new one and I regret the day I drove off the lot with it.  Now every time I see another Silverado on the road, I wonder to myself, "I wonder if their truck drives correctly?"  It is ridiculous that a $60,000 truck rides like crap.  I mean, how can GM expect me to be satisfied with this purchase?  If this problem isn't fixed after three attempts, which I doubt it will, I will be hiring a lawyer and proceeding with a Lemon Law claim.  For GM just to say they are aware it's a problem but don't know how to fix it is not acceptable.  Are others out there in the same situation as me?  If you got your's fixed, how exactly did you do it?  Thanks.   

Did they fix your truck...I have a 18 with 6.2 8sp 1100 miles doing same thing ....dealer is looking at it...

Edited by G3108
Posted

I have an appointment this coming Monday.  My dealership has the new Bosch tool and Mobil 1 fluid. I'll let you know the result. Crossing my fingers. 

Posted

Mine is no longer shuddering ...feels right.  Only an occasional downshift in traffic approaching traffic light that is not as smooth as previous transmissions.

  • Like 1
Posted
1 hour ago, ForumUser said:

Mine is no longer shuddering ...feels right.  Only an occasional downshift in traffic approaching traffic light that is not as smooth as previous transmissions.

I hope it stays that way!!! I am waiting to see if after X amount of miles if this truly fixes the problem. I have not experienced it but after some members get some miles on this fix, I may just pay out of pocket as a preventative measure.

Posted

Dang it, my new 2018 GMC Denali with about 3,000 just started shuddering tonight on the highway at about 62mph.  Dang. I love this truck but now I feel it has a disease.  I guess I will call the dealer tomorrow.

Posted

Had my truck in for the flush yesterday. On the ride home I experienced zero shudder. The transmission feels much less jumpy and confused. It's only been 30 miles or so, but the new fluid does seem to fix the issue. Let's just hope it's a permanent fix. 

  • Like 1
Posted
On 2/1/2019 at 5:15 PM, G3108 said:

What is the status on most recent tranny flush ? 2018 6.2 with 8speed

I have had mine back from the dealer now for a couple weeks. Had my '18 in with 450 miles on it. Felt the shudder on the way home a couple of times but it appears to be gone now. My dealer didn't have the new Bosch machine but used the new fluid. I have put a few hundred miles on since the flush.

  • Like 1
Posted

Mine was shuddering for quite a while...did not think much of it until recently as I am quickly approaching 36K...im at 28K so thought i'd take it in. Torque Converter Failure, DOC # PIP5504A is referenced in the documentation.

 

"....Per bulletin, proceded to removing trans pan and inspecting for excess debri, found significant debri from torque converter clutch desintegrating"

Posted

So I put another 30 miles on the truck today.  I have yet to experience any shudder.  Really happy that is finally gone.  As far as the transmission itself goes, I'm still getting slightly hard shifts from 1st-2nd (mostly when under light acceleration).  I'm thinking this is just normal operation for this transmission.  Also, I definitely notice the downshifting when I'm coming to a stop.  I had a '14 and '17 Silverado 1500 before this one.  Neither of those trucks seemed to do this as noticeably.  This is the first Silverado I've had with the 6.2L motor, so maybe that's just how it works?  I don't think there is anything wrong with it.  Just doesn't seem to act the same as my previous trucks.  Anyone else notice anything similar when coming to a stop?  It's not the Grade Braking, either.  I've turned that off and it makes zero difference.

 

Overall, I'm happy with the truck once again.  I was beginning to hate the thing.  Driving it was not a pleasant experience with the shudder issue.  For those of you who are going through this, rest easy knowing the new Mobil 1 fluid fixes the problem.  Like everyone else on this forum, I just hope it's a permanent fix and not a band-aid.  

Posted

Not sure if my issue is the same but I get a shudder (like rumble strips) when I'm in the 4A mode. If I hit a patch of snow or ice and the road is uphill the truck will shudder. It doesn't shudder all the time but just intermittently and only in the 4A mode. 

Posted
Not sure if my issue is the same but I get a shudder (like rumble strips) when I'm in the 4A mode. If I hit a patch of snow or ice and the road is uphill the truck will shudder. It doesn't shudder all the time but just intermittently and only in the 4A mode. 

That’s it!


Sent from my iPhone using Tapatalk
Posted

Just picked up a 2018 Silverado LT with 6 speed. No issues I can tell so far. Does this issue only occur on the 8 speed?

Posted (edited)
1 hour ago, al210 said:

Just picked up a 2018 Silverado LT with 6 speed. No issues I can tell so far. Does this issue only occur on the 8 speed?

No but if it makes you feel any better...I have read all the horror stories and have just over 3K on my 2018 Sierra 6.2 with 8 speed without any problems.

Edited by SS502
  • Like 1
Posted
11 minutes ago, SS502 said:

No but if it makes you feel any better...I have read all the horror stories and have just over 3K on my 2018 Sierra 6.2 with 8 speed without any problems.

Thanks, I'm pretty picky on noise and vibration. I have the 5.3 with the 6 speed.

Posted
Just now, al210 said:

Thanks, I'm pretty picky on noise and vibration. I have the 5.3 with the 6 speed.

I can tell you honestly, that even with my bi-focal vision I could thread a needle in my truck doing 85 mph (as a passenger LOL). I normally stay at below 75 mph but certainly wanted to see if I have any of these vibrations described by others, I do not. I have driven in Drive, L7 (to keep AFM off) and with tow/haul on and off with no issues at all. Before I installed the Borla ATAK Cat-back, I couldn't hear the V8 to V4 switch during AFM but I can hear it now but I rarely ever drive in anything other than L7. I am also on my second set of tires, the stock ones for a few hundred miles and the 275/60R20 BFG K02 tires after my 2.5 inch RC level. All good to go since day one. I have considered having the transmission flushed and filled with the new fluid as a PREVENTATIVE measure only.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,897
    Total Members
    8,960
    Most Online
    ncleg
    Newest Member
    ncleg
    Joined
  • Who's Online   6 Members, 0 Anonymous, 746 Guests (See full list)


  • Latest Articles

  • Posts

    • I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
    • Yes your absolutely right, I been looking at the 4 inch BDS one and it acutely states you can use the stock 20’s just not the 17’s or 18’s, I also didn’t realize that with my 275/60r20 stock wheels I’m already running 33 inch diameter wheel setup lol so I can just run my stock wheels and tires atleast to start.
    • I would expect that to be lift-kit dependent.  If the kit has interference issues w stock wheels, then the kit/manufacturer should indicate that somewhere.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...