Jump to content

SD Card Removed Nav error?

Tritipnbeer
 Share

Recommended Posts

dbs600 Enthusiast

dbs600

Posted
Posted
1 hour ago, AndrewSmith21 said:

They replaced the sd card first, reader part, the usb cable, the whole radio unit, and finally they called GM and got a software patch that the dealership had to download it. It took them two day’s to get it to download to their computers. After the patch update it was fixed. It’s been okay every since. At first sometimes it would still pop up the error message but it would fix itself and work right then. Last week the only random thing was my backup camara had a blue screen on it. But it finally came back after it sat awhile and worked. Your best bet is to take it to a dealer and have them call GM and have them install the patch for the radio system. 

Is the 'patch' actually the software update from 805 to 807, or is it something else?

 

Thank you for all this info, but sounds like you're still experiencing problems.

 

Have you asked them about the SD Card Removed message still showing? If so, what have they said?

 

How long does it take after the error message displays until you're able to use the navigation system?

 

Does the screen freeze / go black and the system reboot at all?

 

Thanks again; I appreciate all your help.

 

My best.

  • 3 weeks later...
  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

dbs600
dbs600

Any updates on this anyone?   I'm still having the difficulty with this.   Now on Version 807.   Thanks.

bryn0727
bryn0727

Evidently the SD card must be "Ejected Properly" here's a link explaining what's going on and how to fix it...     https://gm-techlink.com/?p=13677  

Yaf New Member

Yaf

Posted
Posted

I have a 2019 Sierra 1500.  I am having the sd card error pop up as well.  Am waiting for card reader ordered by dealer.  I found i can cause the error any time it seems to be working by lightly tapping the console or opening the console lid and closing it.  Acts like loose or faulty connection in the card reader.

  • 3 weeks later...
dbs600 Enthusiast

dbs600

Posted
Posted

After updating to 807 and replacing the SD Card and card receptacle, GM now wants to replace the radio control module, which requires two visits, one where they need to get the number off the current unit and another to replace same.

 

I want them to go to back to 509, the last known working version which had no problem at all.

 

Has anyone been successful in getting a dealer to go back to an earlier software version?

 

Any other updates anyone? Please provide the latest status.

 

Thank you.

  • 2 months later...
mcgee500 Enthusiast

mcgee500

Posted
Posted

I did a search to find this tread just what my truck did the other day. But my truck has no sd card slot anywhere. The navigation came from the factory so there is nothing to be removed. But as other have said let the truck sit over night and now everything works again. NOTHING fixes itself.

  • 2 weeks later...
  • 9 months later...
  • 1 month later...
ArrowsmithPML Enthusiast

ArrowsmithPML

Posted
Posted

2021 3500 AT4 and the SD card has an error. I've read through this just went outside to check to see if the card was locked. As it didn't say, I moved the slider forward, that was clearly unlocked as there were more errors, so I moved it back. No fix. Onstar has attempted it as well. Dealer wasn't overly helpful.

  • 2 months later...
Tracy Gregg New Member

Tracy Gregg

Posted
Posted (edited)

I have a 2019 Sierra Denali and at around 3 months the navigation started working intermittently. Then my usb port under the main console went out so I used the one in the console until it quit. I took it in for service and they replaced the wiring harness and told me that the fix makes the usb port in the console for charging only. That fix lasted 2 days before all ports stopped working and sd card removed message came back. They also tried to blame my using a magnetic cable which I use on all my phones and cars as it is easy to just slide the phone on the tray charger and it magnetically connects to use android auto. The 2nd time it failed I was using factory samsung usb data cable. Also my whole camera system went to blue screen twice since the 2nd time they fixed it. Now they are going to replace the whole radio and wiring harness including the sd card reader in the console. I am really beginning to reach my wits end and hope this next fix lasts for more than 2 days. They told me they have some bulletins on the usb port issue but I have been unable to find anything on the web  so must not have been leaked from any internal sources yet. Anyone have any other ideas for a fix?

 

Edited by Tracy Gregg
  • 3 weeks later...
Dclay17 New Member

Dclay17

Posted
Posted
On 6/16/2019 at 8:06 PM, eppieguy said:

Take the card out and put the slide to lock, reinsert card and see if that does the trick for you.

 

On 6/16/2019 at 8:06 PM, eppieguy said:

Take the card out and put the slide to lock, reinsert card and see if that does the trick for you.

How do I lock the sd card? is it push it down... or up to lock it in??

steelcity Enthusiast

steelcity

Posted
Posted
1 hour ago, Dclay17 said:

 

How do I lock the sd card? is it push it down... or up to lock it in??

 

WeGone Enthusiast

WeGone

Posted
Posted

Don't know if this right or wrong or what leaving the card unlocked does.

 

I only had the truck a few days when  I had the SD card error message. Ejected the card un-locked it reinstalled never had another issue.

 

 

  • 2 weeks later...
Waldem Mir New Member

Waldem Mir

Posted
Posted

AT4 here doing same card reader crap error. 

Unbelievable these trucks are new with all kind of malfunctions. 

My battery has been dead 3 times in 10 months 

  • 8 months later...
Gorby2149 Enthusiast

Gorby2149

Posted
Posted

Seeing the same SD card error on my "new to me" 2019 Sierra.  Usually i could wiggle some stuff it would start working again. A week ago no matter what i did it wouldn't work again.  Yesterday i took it to the dealer....has 46k miles so of course nothing is warrantied...tech confirmed entire port did not work....took everything apart to check connections, found nothing, re-installed everything and it worked again.  He could not get it to fail after that.  0$ charge but who knows how long it will last.  GM part number for that part is 13529862 which i can buy and swap myself.....anybody done that on their own??  Success?  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Drive Cycle

      By newdude · Posted

      Conditions for Meeting a Cold Start   The ignition voltage is between 10 and 15 V. The barometric pressure (BARO) is more than 75 kPa. The engine coolant temperature (ECT) at start-up is less than 42°C (108°F). The intake air temperature (IAT) is between 2–32°C (36–90°F). The engine is OFF for greater than 6 hours or the following conditions must be met: The start-up IAT minus start-up ECT are within 12°C (22°F). The start-up ECT minus start-up IAT are within 50°C (90°F). Fuel level is between 25 and 75 %.   Circuit/System Verification Verify that all I/M System Status indicators report YES, and that no I/M Test DTCs are present.If any I/M Test DTCs are set Refer to Diagnostic Trouble Code (DTC) List - Vehicle. If no I/M Test DTCs are set All OK. Inspection/Maintenance (I/M) System Set Procedure   Warning: Refer to Road Test Warning. Note: Do NOT touch the accelerator pedal until told to do so. A change in TP Sensor angle or an increase in engine speed may invalidate this portion of the test.   Note: An I/M Test DTC will not be stored or erased from the ECU except at the end of trip processing, which occurs 5 s after ignition OFF.   Ensure that the vehicle meets the conditions for a cold start listed above. If the EVAP I/M System Status indicator displays NO, perform the EVAP Service bay test if applicable. Turn OFF all of the accessories; HVAC system, other electrical loads, including aftermarket/add-on equipment, etc., and open the hood.   Set the vehicle parking brake and ensure the vehicle is in park for automatic transmission or neutral for manual transmission.   Start and idle the engine for 2 min.   Close the hood, release the parking brake and Accelerate at part throttle to 72–80 km/h (45–50 mph) with this speed maintained until the engine reaches operating temperature, 8–10 min.   Continue operation under these conditions for an additional 6 min.   Accelerate at part throttle to 90 km/h (55 mph) with this speed maintained for 2 min.   Release the accelerator pedal for at least 10 s. This will allow the vehicle to enter the decel fuel cut off.   Safely stop the vehicle, with the engine in drive for automatic or neutral with the clutch pedal depressed and parking brake applied for manual. Allow the vehicle to idle for 2 min.   Shift the vehicle to park for automatic and neutral for manual. Turn OFF the ignition and exit the vehicle. Do NOT disturb the vehicle for 45 min.   Observe the Inspection/Maintenance (I/M) System Status with a scan tool. All of the I/M System Status indicators should display YES.   If the EVAP I/M System Status indicator displays NO, turn OFF the ignition, ensure that the vehicle meets the conditions for a cold start, and repeat steps 6-11 three more times, or until the EVAP I/M System Status indicator transitions to YES. If the indicator continues to display NO, refer to the Inspection/Maintenance (I/M) System DTC Table to identify the DTCs that did not run.   If any of the I/M System Status indicators display NO, refer to the Inspection/Maintenance (I/M) System DTC Table for the indicator which did not display YES. The I/M System DTC Table identifies the DTCs associated with each I/M System Status Indicator.   Observe the I/M Test DTC information with a scan tool. Verify there are no I/M Test DTCs present. If an I/M Test DTC is set, diagnose the DTC using the Diagnostic Trouble Code (DTC) List - Vehicle and refer to Inspection/Maintenance System Check.   Observe the engine DTC information with a scan tool. Verify no DTCs are present. If a DTC is set, diagnose using the Diagnostic Trouble Code (DTC) List - Vehicle. After repairs, perform the Inspection/Maintenance Complete System Set Procedure to verify no further DTCs are set.       Looks like one procedure to me.  Repeated as necessary.
    • calgator73
      6.2L L87 Powertrain Engine Noise (Lifter Failure) Question

      By calgator73 · Posted

      My 2020 AT4 6.2 has had the valve spring issue addressed at ~200 miles, front cover/pump replaced at 18k, water pump at 34k and idler pully at 65k.  I would agree with ditching by 100k unless you elect to go with upgraded hardware...say built 10l80 and an lt4 or l8p swap.
    • todd wollemann
      Hot fuel module

      By todd wollemann · Posted

      I also need one of your modules for my 1993 chevy c2500 7.4 Thanks! My email is [email protected]
    • C/K Man
      2027 Chevrolet Silverado: Official Discussion

      By C/K Man · Posted

      Chevy needs to do a black regular cab short box SS model with the new 6.6L.  400SS.
    • davester
      Drive Cycle

      By davester · Posted

      You might find the drive cycle you need somewhere on charm.li (website), otherwise I suggest a subscription to alldata.com to get them for your truck.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...